USER MANUAL WeatherLink Live TM Product number 6100 R Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229 • www.davisinstruments.
FCC Part 15 Class B Registration Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Welcome to WeatherLink Live WeatherLink Live enables you to live-stream your weather station data to the WeatherLink app while on your Wi-Fi, and to automatically upload your data to the WeatherLink Cloud via Wi-Fi or Ethernet. You can access your data on any computer or smartphone that has an internet connection on WeatherLink.com or the WeatherLink mobile app. While on the same local network (Wi-Fi or Ethernet) as your device, the WeatherLink app will stream live data, with packets every 2.
2. In the app, create your account on WeatherLink.com. 3. Make sure your smartphone’s “Bluetooth” function is on. With your phone near your WeatherLink Live, tap the Account icon: in the upper right corner of the app’s home screen. 4. Scroll down to WeatherLink Live, and tap the Add button. Note: You will use the user name and password you have set up to access your page on WeatherLink.com from your computer as well.
3. The blue LED light will begin flashing indicating that the device is ready to connect to the smartphone app. Tip: The device will “go to sleep” and the blue LED will turn off if you don’t connect the device within a few minutes. You can “wake it up” when you are ready to proceed by touching the capacitive touch pad. (See the image on page 1.) 4. With WeatherLink Live “awake,” and your phone next to it, follow the prompts to connect WeatherLink Live to the internet.
Set Up the Transmitting Station(s) Once your WeatherLink Live is successfully installed, you will add your transmitting station, or stations, to which it will “listen.” 9. Tap Add Station & Sensors. 10. In the next screen, tap the ID of the transmitting station. (This will probably be ID 1, because Davis transmitters are set at the factory to transmit on ID 1.) 11.
Troubleshooting The blue LED on my WeatherLink Live is not on. The device may have “gone to sleep.” Touch the capacitve touch pad (see image on page 1) to “wake it up.” If the LED still does not come on, make sure your WeatherLink Live is connected to AC power. My WeatherLink Live will not connect to the internet. If using a Wi-Fi connection: Check to make sure you entered the correct Wi-Fi password. If using an Ethernet connection: Reseat the Ethernet cable.
Contacting Davis Technical Support For questions about installing or operating your WeatherLink Live, please contact Davis Technical Support. We’ll be glad to help. Online www.davisinstruments.com See the Weather Support section for copies of user manuals, product specifications, application notes, software updates, and more. E-mail support@davisinstruments.com Telephone (510) 732-7814 Monday - Friday, 7:00 a.m. - 5:30 p.m. Pacific Time. Specifications (See www.davisinstruments.