USER'S MANUAL FOR Leisure TOUR Ver.10720DCCI The most optimized wireless solution for active interaction. Full-duplex discussion and communication between the leader and a guest.
. Controls and Indicators 2.1 DCX-L101 Ear set Boom Microphone input Line In USB port (only, Firmware upgrade) LCD LED indicator Label Mode (MUTE On/Off ) Down UP The Label can be seen when the battery cover and battery are removed.
Power Button Press and hold the Power button for a second to turn the device power On/Off. Mode Button ff Mute On/Off Talk is ON while pressing the button, Move to the next setting article. Up Button Increase Volume Level, Channel number, MIC gain and Side tone On/Off. Go to setting mode. (Press Up/Down buttons together). Down Button Decrease Volume Level, Channel number, MIC gain and Side tone On/Off. Go to setting mode. (Press Up/Down buttons together) Headset Jack 3.
2.
3. How to Use 3.1 Set-up in 3 easy steps - Step 1, Plug In Plug in the Single ear headset with boom Mic and plug-in Earphone w/inline Microphone - Step 2, Turn On Turn on the power and adjust the volume to the level you desire.
- Step 3, Set Channel Number Set the same channel number between the by press " " and " " button. PRESS 3.2 Mute On/Off 3.2.1 Leader Mute will be enabled/ disabled with a quick press of Mode button ( ). Mute on ; icon disappears from the display screen and the Guests cannot listen to the Leader. Mute off ; icon appears on the display screen and all the Guests can listen to the Leader. This function toggles each time when short press the Mode button( ).
3.2.2 Guest The Mode button is a push to talk (PTT); Can talk only when pushing, and connection to talk is very fast. When PTT is activated, the display shows and a single beep occurs. PTT is activated only when pressing the Mode button( ) and automatically deactivated when release the button. If another guest presses PTT first and is on a talk, double beep occurs as alert when you press PTT and the microphone icon does not appear. 3.3 Audio Alert Low battery ; Short & repetitive tone occurs every 2 min.
Figure 1 Channel CH MIC GAIN C1~C5 SIDE TONE SO / SF After selecting the desired mode, wait for few seconds or long press “ ” and ” ” buttons together to finish the setting. 3.6 Volume Adjustment Volume adjustment function to let the user to change the volume when needed. Volume Level appears on the top of the LCD screen when turn on the power. In normal mode, adjust the volume to the desired level by pressing “ ” or ” ” button on the front of the device. Volume can be set from 0 ~ 10.
- Guest 3.7 Channel Selection Channel setting function to let the user to change the Channel when needed. Turn on the power of the device. Long press “ ” and ” ” buttons then the LCD screen becomes SETTING mode and blinks. Press “ ” or ” ” buttons on the front of the device to set the desired Channel.
- Guest After selecting the desired channel, wait for few seconds or long press “ ” and ” ” buttons together to finish the setting. 3.8 Microphone Sensitivity Level Selection MIC gain Level can be adjusted when using. Turn on the power of the device. Long press “ ” and ” ” buttons then the LCD screen becomes setting mode. Then press Mode button ( ) once. Short press Mode button ( ) to go to MIC gain level setting screen. Adjust the MIC gain setting by “ ” or ” ” buttons.
- Guest ~ After adjusting to the desired level, wait for few seconds or long press “ ” and ” ” buttons together to finish the setting. 3.9 Side Tone Selection Side Tone can be turned On/Off. Turn on the power of the device. Long press “ ” and ” ” buttons then the LCD screen becomes setting mode. Short press Mode button ( ) to go to Side Tone setting screen. The user can turn Side Tone level On (SO) or Off (SF) by “ ” or ” ” buttons.
3.10 Line - In It is available to publish with background music. Connect the cable between Line- In and external audio source by using the optional Line-In cable and adjust to the desired volume level of music. or Note) The Line-In cable might not be working depending on the wire diagram of external audio source. Please check the wire diagram of the external audio source and match it to the wire diagram of the Line-In. 3.11 Battery The rechargeable Li-Ion battery 3.
4. Specification Dimension 58 x 88 x 17.4 mm Operating Temperature -10 ~ +50 Radio Frequency DCX-L101 ; 902.5MHz ~927MHz DCX-L102 ; 863.4MHz ~864.
Voice latency(typical) 30ms Number of simultaneous listeners Unlimited Number of group DCX-L101 ; 50 CH DCX-L102 ; 8 CH DCX-L103 ; 40 CH Hours of operation(typical) 10 hours for Leader / 15 hours for Guest Number of simultaneous transmitters 2 Battery Type Li-ion Battery @3.
This product has been certified with the following antennas, and may only be used with the same or less antenna gain. Antenna Max. Gain Chip Antenna -1.0 dBi This equipment complies with the essential requirements of EC Directive 2014/35/EU, 2014/30/EC and 2014/53/EU, as applicable. Declarations are available from your local representative.