User's Manual

ManualsBrandsDatel Design & Development ManualsElectronicsWireless Controller for use with PS3Â®

TurboFire® EVO™

For PS3®

User Guide

V1.0

Index

1. Thank you for Choosing TurboFire EVO

2. Carton Contents

3. Important Information

4. Controller Overview

5. Combat Command LCD Display Overview

6. Inserting Batteries

7. Attaching a Rechargeable Battery Pack

7.1. Recharging a Rechargeable Battery Pack

8. Pairing the Controller

9. Adjusting the Level of Brightness

10. Entering and Exiting the TurboFire EVO Menu

11. Activating Features

12. Pre-installed Features

12.1. Sniper

12.1.1. Configuring Sniper

12.2. Remap

12.2.1. Configuring Remap

12.3. Rapid Fire

12.3.1. Choosing Which Buttons are Assigned Rapid Fire

12.3.2. Setting Rapid Fire Speed

12.4. Low Recoil

12.4.1. Configuring Low Recoil

13. EVO Customizer PC software

14.

FCC Rules, Part 15

15. Customers in Canada

16.

Technical Support and Customer Service

Summary of content (10 pages)

PAGE 1
Index TurboFire® EVO™ For PS3® User Guide V1.0 1. Thank you for Choosing TurboFire EVO 2. Carton Contents 3. Important Information 4. Controller Overview 5. Combat Command LCD Display Overview 6. Inserting Batteries 7. Attaching a Rechargeable Battery Pack 7.1. Recharging a Rechargeable Battery Pack 8. Pairing the Controller 9. Adjusting the Level of Brightness 10. Entering and Exiting the TurboFire EVO Menu 11. Activating Features 12. Pre-installed Features 12.1. Sniper 12.1.1. Configuring Sniper 12.2.
PAGE 2
1. Thank you for Choosing TurboFire® EVO™ 3. Important Information TurboFire® EVO™ further builds on the already impressive spec of the best-selling third party wireless controllers TurboFire® and TurboFire® 2. The TurboFire® EVO™ includes a 1.7” Combat Command LCD Display, enabling you to select from and configure a range of in built enhancement features.
PAGE 3
4. Controller Overview 5. Combat Command LCD Display Overview 6. Inserting Batteries Before inserting batteries, please refer to the ‘Important Battery Precautions’ information beneath section ‘3’.The TurboFire EVO can be powered using regular cell AA batteries or using a rechargeable battery pack as described in the next section.
PAGE 4
7. Attaching a Rechargeable Battery Pack The TurboFire EVO supports the usage of a rechargeable battery pack (not supplied). A rechargeable battery pack is used in place of the battery compartment and is usually a sealed unit. Rechargeable battery packs are manufactured by a number of first and third party manufacturers. In order to attach a rechargeable battery pack, please follow these steps: Other Charging Information The TurboFire EVO does not support the usage or charging of rechargeable AA batteries.
PAGE 5
9. Adjusting the Level of Brightness The Combat Command LCD Display can be set to the preferred level of brightness. In order to adjust the level of brightness, please follow these steps 10. Entering and Exiting the TurboFire EVO Menu Whilst you are within the TurboFire EVO menu the TurboFire EVO buttons and controls will only allow you to control the TurboFire EVO menu. In order to exit the TurboFire EVO Menu and regain control of your console, you need to tap the Home button, Back button or button. 11.
PAGE 6
12.1.1. Configuring Sniper When configuring Sniper you are increasing or decreasing the speed of the analogue sticks by adjusting the y-axis and x-axis slider bars for each analogue sticks. The y-axis is up and down movement, the x-axis is left and right movement. The centre of a slider bar represents the normal speed of the axis. When moving a slider bar to the left you are slowing down the x-axis or y-axis. When moving a slider to the right you are speeding up the x-axis or y-axis.
PAGE 7
12.2.1. Configuring Remap 12.3. Rapid Fire In order to program which buttons should be pressed to activate each control, please follow these steps: The unique programmable Rapid Fire feature can boost your firepower in any PS3 game. The Rapid Fire can be set to operate at different speeds and can be assigned to wide range of buttons. After entering the TurboFire EVO Menu as detailed under section ‘10’, using the button select the Rapid Fire image to enter the Rapid Fire configuration screen.
PAGE 8
In order to assign Rapid Fire to the Start button and Back button without exiting the Rapid Fire configuration screen. You need to press and hold the F1 or F2 button before pressing the Start button and Back button. When making your selections, as shown button icons are displayed by the Rapid Fire configuration screen confirming the buttons which will be assigned Rapid Fire. 12.4. Low Recoil The Low Recoil feature allows you to set the level of rumble which you feel during gaming.
PAGE 9
Left Handle Slider Bar Moving the Left Analogue stick left and right will adjust the Left Handle Slider Bar, as shown in the following illustration: 14. FCC Rules, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 10
15. Customers in Canada IC warning statement: This Class B digital apparatus complies with Canadian ICES-003. This device complies with RSS 210 of Industry Canada (IC). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.