DATECS PD20/PD20-1 User Manual
1 DATECS PD20/PD20-1 USER MANUAL REVISION HISTORY Version Data Change description 1.0.0 08.01.2021 First Release 1.1.0 31.03.2021 Added PD20 1.2.0 16.04.2021 Updated section “TECHNICAL SPECIFICATIONS” 1.3.0 28.04.2021 Updated section “Status LEDs” 1.4.0 03.06.2021 1.5.0 13.07.2021 Updated section “TECHNICAL SPECIFICATIONS” 1.6.0 27.07.2021 Updated section “REGULATORY” UM 07.01.31/v1.6.
1 DATECS PD20/PD20-1 USER MANUAL CONTENTS REGULATORY ........................................................................................................................................................................... 5 TECHNICAL SPECIFICATIONS ................................................................................................................................................... 8 GENERAL VIEW ..............................................................................................
1 DATECS PD20/PD20-1 USER MANUAL REGULATORY FCC Statement FCC ID: YRW-PD20 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1 DATECS PD20/PD20-1 USER MANUAL ISED Statement IC: 25981-PD20 English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
1 DATECS PD20/PD20-1 USER MANUAL contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with ISED RF exposure requirements, and should be avoided. SAR France: Informations sur le débit d'absorption spécifique (DAS): Cette PD20 répond aux exigences du gouvernement en matière d'exposition aux ondes radio.
1 DATECS PD20/PD20-1 USER MANUAL TECHNICAL SPECIFICATIONS Processor ARM Cortex® M3 Security Microcontroller Memory 64KB Internal ROM 256KB Internal RAM 1MB Internal Flash Application Memory 4MB Serial Flash Keypad • ON / OFF key and Bluetooth pairing conformation/cancel • 3-track bi-directional reading Magnetic Card Reader • ISO 7810, 7811 and 7813 Smart Card Reader ISO7816, EMV L1 certified Contactless Card Reader for payment applications (option) • AMEX ExpressPay • Discover D-PAS • Master
1 DATECS PD20/PD20-1 USER MANUAL Waste Electrical & Electronic Equipment The symbol means that according to local laws and regulations your product shall be disposed of separately from household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. GENERAL VIEW Figure 1 UM 07.01.31/v1.6.
1 DATECS PD20/PD20-1 USER MANUAL 1. LEDs indication for Contactless transaction / LEDs indication for device status 2. Mounting insert 1 3. Rear Pads (USB and charging) 4. Contactless reader 5. On/Off button (Bluetooth pairing and cancel button) 6. USB port 7. Mounting insert 2 8. Opening for magnetic card 9. Opening for inserting smart card UM 07.01.31/v1.6.
1 DATECS PD20/PD20-1 USER MANUAL GETTING STARTED PD20/PD20-1 has rechargeable Li-Po battery. Can be charge from USB port or Rear pads. Before first use, battery must be fully charged. If the device is fully discharged, charging time to fully charged would be approx. 1 hour and 30min. Charging form USB adapter: Figure 2 Main battery replacement: To replace the main battery of PD20/PD20-1 please contact with your local Datecs representative or service provider. UM 07.01.31/v1.6.
1 DATECS PD20/PD20-1 USER MANUAL PERIODIC INSPECTION AND MAINTENANCE The following inspections must be performed on a regular basis after initial receipt and installation of PD20/PD20‐1: • There are no visual indications for trying unauthorized opening of the device • There are no unusual wires connected to the ICC acceptor or any of the ports on the terminal. • There is no shim device in the ICC acceptor slot. • The terminal serial number (on the label) corresponds to the one in the inventory paperwork.
1 DATECS PD20/PD20-1 USER MANUAL OPERATION MODES For start operating with PD20/PD20-1 needs to be paired to another Bluetooth BLE device with installed application. For downloading the latest SDKs for iOS, Android and Windows please contact with your distributor. Application download mode, System mode and Clearing Bluetooth paring info Application download mode - to enter application download mode on the PD20/PD20-1, the power button must be maintained pressed and USB cable plugged.
1 DATECS PD20/PD20-1 USER MANUAL LED indication Description Device operating No indication Device is turned off No indication (Depends of Application) Device is turned on System errors UM 07.01.31/v1.6.
1 DATECS PD20/PD20-1 USER MANUAL Bluetooth Pairing Turn on PD20/PD20-1, connect it to PC via USB cable. When device is connected to PC, will create virtual COM port. Check on device manager on which port is connected. After that run the special application for PC (Fig. 3). Press “Search” button on the app, and in right side will be show all available COM ports. Select on which is connected device, then press “Connect to device”. From Bluetooth management on mobile device (equipped with BLE 4.
1 DATECS PD20/PD20-1 USER MANUAL Figure 7 UM 07.01.31/v1.6.
1 DATECS PD20/PD20-1 USER MANUAL Magnetic cards reading The PD20/PD20-1 has a built-in magnetic card reader. The card reader incorporates a (3) track magnetic read head, requiring a single swipe to read field data from all three tracks. The magnetic reading head faces up. When swiping the card into the reader, the magnetic stripe must be facing down as shown in the figure below.
1 DATECS PD20/PD20-1 USER MANUAL Contactless cards reading The contactless card transaction procedure can vary depending on the application loaded on the PD20/PD20-1. Verify the proper procedure with your application provider before performing a contactless card transaction. In order to use the Contactless card reading function, special software must be used. Please contact your distributor in order to get the latest demo application and SDK.
1 DATECS PD20/PD20-1 USER MANUAL Smart cards reading The smart card transaction procedure can vary depending on the application loaded on the PD20/PD20-1. Verify the proper procedure with your application provider before performing a smart card transaction. To Conduct a Smart Card Transaction 1 Position a smart card with the gold contacts facing downward. 2 Insert it into the ICC card reader slot in a smooth, continuous motion until it seats firmly.
1 DATECS PD20/PD20-1 USER MANUAL CARE, MAINTENANCE AND WARRANTY • • • • • • Keep the PD20/PD20-1 side of the reach of small children. Keep the PD20/PD20-1 dry. Precipitation, humidity and liquid contain minerals that will corrode electronic circuits. Do not use or store in dusty or dirty areas. Do not drop or knock PD20/PD20-1. Do not open the PD20/PD20-1. Only qualified personnel can open the device and make repair. If the PD20/PD20-1 is not working, please contact with your dealer.