DATECS LineaPro 7 UHF User Manual
1 DATECS LINEAPRO 7 UHF USER MANUAL LEGAL NOTICE THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD. Address: 4 Datecs Street, Sofia 1592, Bulgaria Phone: +359 2 816 55 50 Fax: +359 2 816 55 65 E-mail: export@datecs.bg UM 07.01.18/v1.1.
1 DATECS LINEAPRO 7 UHF USER MANUAL REVISION HISTORY Version Data Change description 1.0.0 07.04.2020 First Release 1.1.0 28.05.2020 UM 07.01.18/v1.1.
1 DATECS LINEAPRO 7 UHF USER MANUAL CONTENTS REGULATORY ........................................................................................................................................................................... 5 TECHNICAL SPECIFICATIONS ................................................................................................................................................... 6 GENERAL VIEW ...........................................................................................
1 DATECS LINEAPRO 7 UHF USER MANUAL REGULATORY FCC ID: YRW-LINEAPRO7UHF This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Any change or modification to the product not expressly approved by Datecs Ltd could void the user's authority to operate the device.
1 DATECS LINEAPRO 7 UHF USER MANUAL TECHNICAL SPECIFICATIONS Keyboard and Buttons Contactless Card Reader (optional) UHF RFID Reader (optional) 1D Barcode Reader Supported Symbology 1D 2D Barcode Reader Supported 1D and 2D Symbology UM 07.01.18/v1.1.
1 DATECS LINEAPRO 7 UHF Connectivity Device Compatibility LED Indication Audio Features Power Supply Battery Certificates Dimension W x H x D, mm Weight, g Operational temperature range Storage temperature range Compatible Accessories USER MANUAL Composite codes, Data Matrix (ECC200), Passport MRZ (OCR-B), Maxi Code (mode 2~5), MicroPDF417, Micro QR Code, PDF417, QR code Apple 9 pin connector Pass-through sync through USB type-C SAM card holder (Optional) Apple iPhone 8, Apple iPhone 7, Apple iPhone 6S,
1 DATECS LINEAPRO 7 UHF USER MANUAL Use only original equipped DATECS cable USB-A to USB-C (Z05C000000-05) for charging Apple device. Use only UL approved USB adapters. The minimum requirements of USB adapter is 5V/2.1A! Waste Electrical & Electronic Equipment The symbol means that according to local laws and regulations your product shall be disposed of separately from household waste at the end of its working life.
1 DATECS LINEAPRO 7 UHF USER MANUAL GENERAL VIEW UM 07.01.18/v1.1.
1 DATECS 1. Barcode engine 2. On/Off button of Apple device 3. Left and Right scan buttons 4. USB type-C connector 5. Charging pads 6. Reset button UM 07.01.18/v1.1.0 LINEAPRO 7 UHF USER MANUAL 7. Volume buttons of Apple device 8. Back Cover 9. RFID HF Reader 10. Battery status button and LED indication 11.
1 DATECS LINEAPRO 7 UHF USER MANUAL GETTING STARTED LineaPro 7 UHF has rechargeable Li-ion battery. Can be charge from USB port or Charging pads. Before first use, battery must be fully charged. If the device is fully discharged, charging time to fully charged would be approx. 4 hours and 30min. Depends of the settings, LineaPro 7 UHF can pass-through input power supply from USB connector or External features connector to Apple device. Charging current to Apple device can be selected.
1 DATECS LINEAPRO 7 UHF USER MANUAL Battery LED indications For checking battery level, can be pressed status button. LED 1 is lights – battery level is between 1 -25% LED 1 and 2 LED are light – battery level is between 26 - 50% LED 1, LED2 and LED3 are light – battery level is between 51 - 75% LED 1, LED 2, LED 3 and LED 4 are light – battery level is above 76% UM 07.01.18/v1.1.
1 DATECS LINEAPRO 7 UHF USER MANUAL ATTACHING APPLE DEVICE TO LINEAPRO 7 UHF Take LineaPro 7 UHF and lift the back cover, insert the iPhone 7 and close the back cover as shown on picture below: UM 07.01.18/v1.1.
1 DATECS LINEAPRO 7 UHF USER MANUAL OPERATION MODES For start operating with LineaPro 7 UHF is need to be attached Apple device and installed application for iOS. For downloading the latest SDK please contact with your distributor. For turn On LineaPro 7 UHF press one of the scan buttons and unlock Apple device screen. Scanning barcodes LineaPro 7 UHF can scan 1D and 2D barcodes. To scan barcode first, activate the scanner (by pressing and holding the scan button).
1 DATECS LINEAPRO 7 UHF USER MANUAL HF Contactless cards reading The LineaPro 7 UHF has a contactless card reader. Contactless card reader is located on the bottom side. Contactless card must be placed there (showed on the picture below). For list of supported standards, please refer to sections “TECHNICAL SPECIFICATIONS”. UHF Contactless cards/tags reading The LineaPro 7 UHF has a contactless card reader. Contactless card reader is located on the bottom side.
1 DATECS LINEAPRO 7 UHF USER MANUAL Transferring data between Apple device and PC or MAC LineaPro 7 UHF is supporting sync function when USB cable is plugged. Sync can be enable or disabled by setting. If “pass-through sync”, was disabled, when USB cable is plugged to LineaPro 7 UHF will be charge only. To enter in sync mode can be used this way: Holding scan button and plug the USB cable. After that scan button must be release.
1 DATECS LINEAPRO 7 UHF USER MANUAL CARE, MAINTENANCE AND WARRANTY • • • • • • Keep the LineaPro 7 UHF side of the reach of small children. Keep the LineaPro 7 UHF dry. Precipitation, humidity and liquid contain minerals that will corrode electronic circuits. Do not use or store LineaPro 7 UHF in dusty or dirty areas. Do not drop or knock LineaPro 7 UHF Do not open the LineaPro 7 UHF. Only qualified personnel can open the device and make repair.