DATECS User Manual Linea TAB Mini
1 DATECS Linea TAB Mini ` User manual CONTENTS Compatibility ............................................................................................ Error! Bookmark not defined. Linea TAB Mini ........................................................................................................................................ 5 Overview.................................................................................................................................................. 6 Technical Data..
1 DATECS Linea TAB Mini ` User manual Legal Notice “Made for iPod” “Made for iPhone” and “Made for iPad” mean that an electronic accesory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible fort he operation of this device or its compliance with safety and regulatory standards.
1 DATECS Linea TAB Mini ` User manual This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1 DATECS Linea TAB Mini ` User manual Linea TAB Mini Model Linea TAB Mini MSR Linea TAB Mini EMSR Linea TAB Mini MSR 2D Linea TAB Mini EMSR 2D Linea TAB Mini MSR 2D/BT Linea TAB Mini EMSR 2D/BT Linea TAB Mini MSR 2D/ BT/RFID Linea TAB Mini EMSR 2D/ BT/RFID Description Linea TAB Mini with 3-Track mag-stripe reader Linea TAB Mini with Secure Encrypting MSR Module Linea TAB Mini with 3-Track mag-stripe reader and 1D/2D barcode scanner Linea TAB Mini with with Secure Encrypting MSR Module and 2D barcode read
1 DATECS Linea TAB Mini ` User manual Overview Linea TAB Mini allows mobile workers to convert their iPad Mini handset into a powerful point-of-sale solution. The Linea TAB Mini includes optional 1D or 2D barcode scanner, 3-tracks magnetic stripe reader, RFID reader and a rechargeable battery extender in a very compact and durable protective case. Features: Battery: Rechargeable Li-ion Battery - 1100 mAh, charging via USB or DATECS Power Station.
1 DATECS Linea TAB Mini ` User manual Technical Data Power supply Compatibility MCU Communication Interface Internal voltage 3.3V & 5V iPad Mini 32-bit ARM™ Cortex™ - M3 based Microcontroller USB Interface – between Linea TAB Mini and iPad Mini USB Synchronization between Apple iPad Mini ® & PC Power Consumption Deep sleep ~20uA Bluetooth 2.
1 DATECS Linea TAB Mini ` User manual Box Contents Your Linea Tab Mini comes with the following items listed below: Item Part Number Descriptions 1 Linea TAB Mini Linea TAB Mini / Scanner 2 USB A to mini USB B USB Sync cable Linea TAB Mini User User's manual Manual *Bulk Shipments may ship without cables and manuals in each box.
1 DATECS Linea TAB Mini ` User manual Getting Started The Linea TAB Mini allows you to scan barcode and capture Magnetic Strip information onto your iPad Mini. Before using your Linea TAB Mini the battery should be properly charged. The following Quick Start guide will help to get your Linea TAB Mini ready for use. Quick Start: Purpose Where to find more information Fully charge your Linea TAB Mini as recommended. The battery pack should be fully charged before use to ensure long battery life.
1 DATECS Linea TAB Mini ` User manual Buttons overview Front side view Battery charging LED Device status LED Scan engine Volume Controls 10-pin mini USB connector Charging Lamellas Scan Button 9-pin lightning connector External RS connector 10
1 DATECS Linea TAB Mini ` User manual Back side view Four LEDs for Contactless status Magnetic Stripe Reader 11
1 DATECS Linea TAB Mini ` User manual Attaching device Slide iPad mini to the 9-pin lightning connector of the Linea TAB Mini 12
1 DATECS Linea TAB Mini ` User manual Operation modes Active mode - While iPad Mini is inserted. While the Linea TAB Mini application is active. Sleep mode - While iPad Mini is removed (after ~10sec). When iPad Mini On/Off button is pressed (after ~10sec). When iPad Mini “Auto-Lock” function is activated (after ~10sec). Charging Battery The Linea TAB Mini uses a 1100mAh Lithium-Ion rechargeable battery pack. Before first use, the battery pack should be charged for at least (4) hours.
1 DATECS Linea TAB Mini ` User manual Barcode Scanning Using the 1D barcode scanner: The Linea TAB Mini 1D uses a scan engine that supports one-dimensional (1D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size. Scanning 1D Barcodes: To scan a 1D barcode, first activate the scanner. Then position the scanning head as close as possible to the barcode label so that the scan line crosses both ends of the barcode as shown on the figure below.
1 DATECS Linea TAB Mini ` User manual Using the 2D barcode scanner: The Linea TAB Mini 2D uses a scan engines that supports one-dimensional (1D) and two-dimensional (2D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size. Scanning 2D Barcodes: To scan a 2D barcode fist activate the scanner.
1 DATECS Linea TAB Mini ` User manual Card Reading Reading Magnetic Stripes: The Linea TAB Mini has a built-in magnetic card reader. The card reader incorporates a (3) track magnetic read head, requiring a single swipe to read field data from all three tracks. The magnetic reading head faces up, towards the top of the bottom cover of the cradle. When swiping the card into the reader, the magnetic stripe must be facing down, as shown in the figure below.
1 DATECS Linea TAB Mini ` User manual Contactless Card Reading In order to use the RFID card reading function, special software must be used. Please contact your distributor in order to get the latest demo application and SDK. Place the card on the shown spot and press the reading RFID card button on the application. The data will be sent from the Linea TAB Mini RFID reader to the Apple Device.