DATECS BlueLite User Manual
1 DATECS BLUELITE USER MANUAL THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD. Address: 4 Datecs Street, Sofia 1592, Bulgaria Phone: +359 2 816 55 50 Fax: +359 2 816 55 65 E-mail: export@datecs.
1 DATECS BLUELITE USER MANUAL REVISION HISTORY Version Data Change description 1.0.0 24.11.2017 First Release 1.1.0 22.01.2019 Updated specification and added section “Scan to Pairing” 1.2.0 13.11.
1 DATECS BLUELITE USER MANUAL REGULATORY FCC ID: YRWBLUELITE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment.
1 DATECS BLUELITE USER MANUAL CONTENTS TECHNICAL SPECIFICATIONS ................................................................................................................................................... 6 GENERAL VIEW ........................................................................................................................................................................ 7 GETTING STARTED ...............................................................................................
1 DATECS BLUELITE USER MANUAL TECHNICAL SPECIFICATIONS Processor ARM Cortex® M3 Security Microcontroller Memory 64KB Internal ROM 256KB Internal RAM 1MB Internal Flash Application Memory 4MB Serial Flash • ON / OFF key Keypad • Bluetooth pairing button Smart Card Reader ISO7816, EMV L1 certified • AMEX ExpressPay Contactless Card Reader • Discover D-PAS for payment applications • MasterCard Contactless (option) • VISA PayWave Contactless Card Reader (option) ISO/IEC 14443 Type-A/MIFARE:
1 DATECS BLUELITE USER MANUAL GENERAL VIEW Figure 1 7
1 DATECS BLUELITE USER MANUAL 1. Button for Bluetooth pairing 2. Micro USB port 3. On/Off Button 4. LEDs indication for Contactless transaction / LEDs indication for device status 5. Contactless reader 6.
1 DATECS BLUELITE USER MANUAL GETTING STARTED BlueLite has rechargeable Li-Po battery. Can be charge from micro USB port. Before first use, battery must be fully charged. If the device is fully discharged, charging time to fully charged would be approx. 1 hour and 30min. Charging form USB adapter: Figure 2 Main battery replacement: To replace the main battery of BlueLite please contact with your local Datecs representative or service provider.
1 DATECS BLUELITE USER MANUAL PERIODIC INSPECTION AND MAINTENANCE The following inspections must be performed on a regular basis after initial receipt and installation of BlueLite: • There are no visual indications for trying unauthorized opening of the device • There are no unusual wires connected to the ICC acceptor or any of the ports on the terminal. • There is no shim device in the ICC acceptor slot. • The terminal serial number (on the label) corresponds to the one in the inventory paperwork.
1 DATECS BLUELITE USER MANUAL OPERATION MODES For start operating with BlueLite is need to be paired to another Bluetooth BLE device with installed application. For downloading the latest SDKs for iOS, Android and Windows please contact with your distributor. Application download mode, System mode and Clearing Bluetooth paring info Application download mode - to enter application download mode on the BlueLite, the power button has to be maintained pressed.
1 DATECS BLUELITE USER MANUAL LED indication Description Device operating No indication Device is turned off First red LED is flashing Device is turned on Second red LED is continuously light on Device battery is charging Operating modes when is press power button First white LED is continuously light on Device will go to normal operating mode Second white LED is continuously light on Device will enter in Boot loader Third white LED is continuously light on Device will enter in System mode
1 DATECS BLUELITE USER MANUAL Bluetooth Pairing Turn on BlueLite, connect it to PC via USB cable. When device is connected to PC, will create virtual COM port. Check on device manager on which port is connected. After that run the special application for PC (Fig. 3). Press “Search” button on the app, and in right side will be show all available COM ports. Select on which is connected device, then press “Connect to device”. From Bluetooth management on mobile device (equipped with BLE 4.
1 DATECS BLUELITE USER MANUAL Bluetooth Pairing to Apple device (iOS) with BLE (Scan to Pairing) 1. Turn on BlueLite (hold On/Off button, around ~2sec). 2. Run the iOS application, go to the settings “Scan barcode”: Figure 8 Then the camera of the phone will be activate 3. Scan the serial number on the label of BlueLite with back camera. 4. Then of the screens on both devices will be showed the “Pairing Request”. Figure 9 5.
1 DATECS BLUELITE USER MANUAL Contactless cards reading The contactless card transaction procedure can vary depending on the application loaded on the BlueLite. Verify the proper procedure with your application provider before performing a contactless card transaction. In order to use the Contactless card reading function, special software must be used. Please contact your distributor in order to get the latest demo application and SDK. To Conduct a Contactless Credit/Debit Card Transaction 1.
1 DATECS BLUELITE USER MANUAL Smart cards reading The smart card transaction procedure can vary depending on the application loaded on the BlueLite. Verify the proper procedure with your application provider before performing a smart card transaction. To Conduct a Smart Card Transaction 1 Position a smart card with the gold contacts facing upward. 2 Insert it into the ICC card reader slot in a smooth, continuous motion until it seats firmly. 3 Remove the card when indicates the transaction is completed.
1 DATECS BLUELITE USER MANUAL CARE, MAINTENANCE AND WARRANTY • • • • • • Keep the BlueLite side of the reach of small children. Keep the BlueLite dry. Precipitation, humidity and liquid contain minerals that will corrode electronic circuits. Do not use or store in dusty or dirty areas. Do not drop or knock BlueLite Do not open the BlueLite. Only qualified personnel can open the device and make repair. If the BlueLite is not working, please contact with your dealer.