Installation Manual For MOSAIC(R) OREO 9 PCMCIA Module 1/20/2011 1
Integration Service Personnel: Before you install the module, you require the following items and information included in this manual. The Module is installed into a mobile data terminal, vehicle-mounted device, or other mobile computing device with: 1.) A PCMCIA Type II slot 2.) Approved antenna: Internal antenna, P/N 650019-0001 or antenna end cap, P/N: CE5B-FLX10, with fitted with MMCX connectors. 3.) Terminal running Microsoft Windows CE Version 4.2 or 5.
b) Connect the device’s antenna to the OREO9 via the MMCX connector. Secure the end cap if used. 3. Configure the mode of operation a) Select Programs, then Settings, then the Serial Port tab at the bottom of the Settings screen b) Select the port labeled OREO9, and select a baud rate of 57.6 KBaud 4.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
