User's Manual

MiniMax II Manual
Preliminary version
Start read
button
Display 32
characters
(2x16)
FDX-B
Transponde
How to operate the MiniMax II :
MiniMax II A00
read
y


Push the start read button once
Software version
The display indicates :
 Point the top of the MiniMax II close to the transponder

Push the start read button once
*reading*
The display indicates :
A
lpha country code
according to
ISO3166,
ISO11784/5
 If a Transponder is present
The display indicates :
Country : CHE
276098101420465
Id code number
according to
ISO11784/5
 If a Transponder is not read
The display indicates :
Tag not found
ready 

If the MiniMax is left at power on and not used for more than 90 sec. It will beep and indicate a battery
sign on the display.
When the battery voltage is less than 7 Volts the reader after 3 seconds turn off.
If the display indicates:
Battery low
Replace the battery with a 9 Volts block battery Alkaline or Lithium.
Another type of battery will not function properly.