COMPACT MAX Scanner User Manual
Contents: 1 DESCRIPTION .................................................................................................................................3 1.1 SWITCH ON THE SCANNER ....................................................................................................................3 1.2 SWITCH OFF THE SCANNER ...................................................................................................................3 1.3 KEYBOARD .......................................................
1 Description Display Antenna Keyboard Micro USB communication port 1.1 Switch on the scanner Press the central red button. 1.2 Switch off the scanner Press the left red button to switch off the reader. COMPACT MAX Reader User Manual 3 05.08.
1.3 Keyboard LEFT button RIGHT button CENTER button 1.3.1 WHEEL CENTER button The CENTER button is used to switch on the COMPACT MAX reader, to start and stop a reading session or to select and confirm the various available settings, the settings are described in later chapters of this manual. 1.3.2 LEFT button The LEFT button is used to shut down the reader or to scroll between the various settings. 1.3.
2 Screen navigation 2.1 Description Main Menu Active screen after power up. Shut Down COMPACT MAX Reader User Manual Read 5 CONTROL MENU 05.08.
2.2 CONTROL MENU 15 Digit UID mode 23 Digit UID mode USB Virtual COM Port mode USB Keyboard Wedge mode This figure shows the number of UID stored in the memory. They can be deleted by clicking on the icon. In this folder it can be chosen to start a Cyclic Test, to start a Statistic Test and to Dump the signal. In this folder it can be found which version of COMPACT MAX it is been using and which firmware version is load.
3 Connect the COMPACT MAX to a PC The PC can be used for many functionalities: 1. To charge the reader’s battery 2. To configure the reader with the S-ID 3. To use the reader as a Mass Storage device like a USB storage pen 4. To connect the reader with the USB in Virtual Com Port to send or receive data 5. To connect the reader with the USB in Keyboard Wedge mode 4 Take care of the reader Ensure that the reader is not damaged. Do not drop it onto a hard surface or subject it to very wet conditions.
6 Do you have a problem identifying an animal? 6.1 The reading distance is too short The maximum reading distance is obtained with the transponder (TAG) perpendicular to the antenna and aimed at the center of the antenna coil. If the tag is implanted into an animal its orientation may not be optimal and therefore the reading distance may be reduced. You might be close to a source of electromagnetic disturbances like video or TV. Move a few meters away and try again. Do not use the reader on a steel table.
7.2 IC RSS 210 This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
9 End of life 9.1 Disassembly Instructions for COMPACT MAX reader Product Name / Model Description COMPACT MAX / Any models Universal portable reader Only authorized recyclers are permitted to use these disassembly instructions. Any attempted disassembly by a user or unauthorized party will void the product warranty and may irreparably damage the product. 9.2 9.