User's Manual

Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. [phone]
Fax [phone]
©2019 Datalogic S.p.A. and/or its affiliates
w All rights reserved. w Without limiting the rights under copyright, no part of this documentation may be
reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or
for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of
Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this
documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this documentation and shall ensure
that all notices appear on any reproductions of the documentation. Should future revisions of this manual
be published, you can acquire printed versions by contacting your Datalogic representative. Electronic
versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or suggestions about this or
other Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and
accurate, however, Datalogic reserves the right to change any specification at any time without prior
notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,
including the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may
be trademarks of their respective owners. Google, Google Play and other marks are trademarks of Google
LLC.
Patents
See www.patents.datalogic.com for patent list.
Rugged Mobile Computer
with 1D/2D Imager
Safety & Regulatory Addendum
852001500 (Rev. A) Nov. 2019
This document is an addendum to the
Quick Start Guide (QSG) for this product.
See the QSG for additional product
information.
©2019 Datalogic S.p.A. and/or its
affiliates. All rights reserved. Datalogic
and the Datalogic logo are registered
trademarks of Datalogic S.p.A. in many
countries, including the U.S. and the E.U.
www.datalogic.com
Read carefully the Memor 20 User Manual (available at www.
datalogic.com) before performing any type of connection to the
Memor 20.
The user is responsible for any damage caused by incorrect use of
the equipment or by inobservance of the indication supplied in the
user manual.
NOTE
Conventions
This manual uses the following convention:
"Memor 20" refer to the MEMOR 20 WWAN.
General Safety Rules
y Before using the devices and the battery packs, read this
Addendum carefully.
y Use only the components and accessories supplied by the
manufacturer for the specific Memor 20 being used.
y Do not attempt to disassemble the Memor 20, as it does not
contain parts that can be repaired by the user. Any tampering
will invalidate the warranty.
y When replacing the battery pack or at the end of the operative
life of the Memor 20 device, disposal must be performed in
compliance with the laws in force in your jurisdiction.
y Do not submerge the Memor 20 in liquid products.
y For further information or support, refer to the Datalogic web
site: www.datalogic.com.
CAUTION
Do not apply any sticker to the Memor 20.
CAUTION
Power Supply
This device is intended to be connected to a UL Listed/CSA Certified computer
which supplies power directly to the Memor 20, or else to be supplied by a UL
Listed/CSA Certified Power Unit marked "Class 2" or LPS power source rated
5-9Vdc, 3.0 A according EIC 60950 or PS2 according IEC 62368, which supplies
power directly to the Memor via the power connector of the cable.
The adapter package might contain international plug adapters. The adapters
must be plugged in the power supply before the power supply itself is plugged
on the wall outlet.
The device shall only be connected to a USB interface of version USB
Type-C. The adapter shall be installed near the equipment and shall
be easily accessible. The device should operate at a temperature
between -20 and 50 C.
CAUTION
LED Class
LED illuminator integrated in the Memor 20 models are compliant with exempt
risk group requirements according to IEC62471:2006 and EN 62471:2008.
Battery Information
The Memor 20 battery pack is not initially fully charged. After installing the
battery, charge it with the USB cable or with the single dock.
By default, the battery pack is disconnected at the factory to avoid
damage due to excessive draining.
Annual replacement of rechargeable battery pack avoids possible
risks or abnormalities and ensures maximum performance.
Avoid storing batteries for long periods in a state of full charge or
very low charge.
We recommend charging the battery pack every two to three
months to keep its charge at a moderate level to maximize battery
life.
CAUTION
Even if the storage temperature range is wider, in order to achieve
the longest battery life, store the terminal and the spare batteries
between 20 to 30°C (68 to 86°F).
Charging is allowed in the battery temperature range from 0°C to
45°C.
To maximize operating autonomy, the Memor 20 checks its battery
level at all times. If the battery is not sufficiently charged, the
Memor 20 will not turn on when the ON/OFF Power button is
pressed.
In this case, either substitute with a charged battery, insert the
Memor 20 into a powered cradle, or plug it into a wall charger.
To maximize battery life, turn off radios when they are not needed.
NOTE
Avoid storing batteries for long periods in a state of full charge or
very low charge.
We recommend charging the battery pack every two to three
months to keep its charge at a moderate level to maximize battery
life.
Annual replacement of rechargeable battery pack avoids possible
risks or abnormalities and ensures maximum performance.
CAUTION
Use only Datalogic approved batteries and accessories for battery
charging.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
WARNING
Do not put any foreign object such as, but not limited to, coins,
paper clips, stickers inside the slot of any of the docks (see the
examples below).
CAUTION
Do not use and leave the product near a heat source as fire or
heater. Device shall operate in it’s operating temperature range.
CAUTION
Use only the adapter supplied with the device. The adapter shall be
installed near the equipment.
CAUTION