User's Manual

Memor™ X3 Mobile Computer
Quick Start Guide
THE PACKAGE
The Memor X3 package includes the following items:
 1 Memor X3 mobile computer
 1 AC/DC power supply
 1 plug kit
 1 standard Micro USB cable (laser and 2D Imager
models only)
 1 hand strap with stylus holder (laser and 2D Imager
models only)
 1 extensible stylus (laser and 2D Imager models only)
 1 guitar pick + cord
 1 Quick Start Guide
 1 Safety and Regulatory Addendum
 1 Wavelink Avalanche Insert
 1 End User License Agreement (EULA) Sheet
 1 Offices Address Addendum
THE TERMINAL
A
) QVGA 64K color display

B) ON/OFF power key
C) Speaker
D) LEDs
E) Scan key
F) Keyboard
G) Microphone
H) Guitar pick stylus
I) Laser safety label
J) Rear speaker
K) Product label (under
battery)
L) Battery cover
M) Programmable side key
(on both sides of the
mobile computer)
822001431

Remove protective film cover before use
N) Data capture window*
O) DC charger connector
P) Communication/charger
connector (through cradle)
Q) MicroUSB communication
connector (through cable)

Remove protective film cover before use
KEYPADS
1. Cursor Keys
2. Scan Key
3. Yellow Modifier
4. Blue Modifier
Special Function Icons
ICON FUNCTION
After a blue modifier key press, it opens the Start
menu.
After a blue modifier key press, it opens the file
manager.
After a blue modifier key press, it switches
ON/OFF the display backlight.
After a blue modifier key press, it switches
ON/OFF the keyboard backlight.
After a blue modifier key press, it locks and
unlocks the keyboard.
After a blue modifier key press, it disables the
touchscreen and allows the user to control the
device through a joystick-driven cursor, with
Memor X3 side keys acting as left and right
buttons
GETTING STARTED
Insert the Battery
1. Press the latch release button and pull the latch down; then
remove the battery cover. First insert the upper side
(contacts), then the bottom side of the battery pack into the
slot:
2. Reinsert the cover. First insert first the upper side and then
press the latch release button and pull the latch down to
insert the bottom. Push the knurled section of the latch
upwards to close the cover:
Charge the Battery
With Power Supply
With Single Cradle
Do not use the Memor X3 until batteries are
charged for minimum 4 hours.
CAUTION
SYNCHRONISE YOUR DEVICE WITH THE PC
Set up Synchronisation using Windows Mobile®
Device Center
Windows Mobile Device Center is only compatible with
Windows Vista and Windows 7; if you run Windows XP or
earlier, you have to download Microsoft ActiveSync.
You can establish a connection to your Memor X3 through
the following interfaces:
 USB either directly or through the Single Dock
 RS232 either directly or through the Single Dock
 Bluetooth®
To establish a partnership between the Memor X3 and a host
PC, start Windows Mobile® Device Center and follow the
steps below:
1. Connect the Memor X3 to the host PC. Windows
Mobile® Device Center configures itself and then
opens.
2. On the license agreement screen, click Accept.
3. On the Windows Mobile Device Center’s Home screen,
click Set up your device.
4. Select the information types that you want to
synchronize, then click Next.
5. Enter a device name and click Set Up.
When you finish the setup wizard, Windows Mobile Device
Center synchronizes the mobile computer automatically.
Microsoft® Office Outlook® emails and other information will
appear on your device after synchronization.
Communicate with Host
N
2
1
4
3
L
I
J
K
M
P
Q
O
F
B
C
A
E
D
G
H