User's Manual

ManualsBrandsDatalogic ManualsComputers & AccessoriesMobile Computer

Table Of Contents

Datalogic ADC, S.r.l.

Via S. Vitalino, 13

40012 Lippo di Calderara di Reno

Bologna - Italy

Telephone: (+39) 051-3147011

Fax: (+39) 051-3147205

documentation or the procedures described therein may be reproduced or

transmitted in any form or by any means without prior written permission of

Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic

ADC”). Owners of Datalogic products are hereby granted a non-exclusive,

revocable license to reproduce and transmit this documentation for the

purchaser's own internal business purposes. Purchaser shall not remove or

alter any proprietary notices, including copyright notices, contained in this

documentation and shall ensure that all notices appear on any reproductions

of the documentation. Should future revisions of this manual be published,

you can acquire printed versions by contacting your Datalogic representative.

Electronic versions may either be downloadable from the Datalogic website

(www.datalogic.com) or provided on appropriate media. If you visit our

website and would like to make comments or suggestions about this or

other Datalogic publications, please let us know via the "Contact Datalogic"

page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this

manual that is complete and accurate, however, Datalogic reserves the right

to change any specification at any time without prior notice. Datalogic and

the Datalogic logo are registered trademarks of Datalogic S.p.A. in many

countries, including the U.S.A. and the E.U.

Memor and the Memor logo are trademarks of Datalogic ADC S.r.l.

All other brand and product names may be trademarks of their respective

owners.

Patents

This product is covered by one or more of the following patents.

Design patents: AU310182, EP0469143, EP1582024, EP2247700,

HK0601962.6, JP1325117, KR30/0466667, TWD118829, USD574830,

USD643034, USD658174, ZL200630124857.0

Utility patents: EP0681257B1, EP0789315B1, EP1128315B1, EP1396811B1,

EP1413971B1, US5992740, US6808114, US6997385, US7387246.

Summary of content (29 pages)

PAGE 1
Datalogic ADC, S.r.l. Via S. Vitalino, 13 40012 Lippo di Calderara di Reno Bologna - Italy Telephone: (+39) 051-3147011 Fax: (+39) 051-3147205 ©2013-2014 Datalogic ADC, S.r.l. An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic ADC”).
PAGE 2
CONTENTS 1 BATTERIES AND MAINTENANCE ................................................... 1 1.1 Charging the Battery Pack ................................................................ 1 1.2 Replacing the Battery Pack ............................................................... 4 1.3 Cleaning the Mobile Computer .......................................................... 7 2 WIRELESS AND RADIO FREQUENCIES WARNINGS ................... 8 3 REGULATORY INFORMATION..................................
PAGE 3
This page intentionally left blank
PAGE 4
BATTERIES AND MAINTENANCE 1 1 BATTERIES AND MAINTENANCE Rechargeable backup batteries and battery packs are not initially fully charged. Therefore the initial operation to perform is to charge them. See below. NOTE By default, the main battery pack is disconnected at the factory to avoid damage due to excessive draining. NOTE Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance. CAUTION 1.
PAGE 5
1 MEMOR™ X3 REGULATORY AND SAFETY Do not use the Memor X3 until batteries are charged for minimum 4 hours. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. CAUTION Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect. CAUTION Mettre au rebut les batteris usagées confor mément aux instructions. Avoid storing batteries for long periods in a state of full charge or very low charge.
PAGE 6
BATTERIES AND MAINTENANCE 1 The Memor X3 may get warm during charging; this is normal and does not mean a malfunction. NOTE Use only a USB-IF compliant USB port as a charging source.
PAGE 7
MEMOR™ X3 REGULATORY AND SAFETY 1 1.2 REPLACING THE BATTERY PACK To correctly replace the battery pack, proceed as follows. 1. Turn off the Memor X3 . 2. Press the latch release button and pull the latch down; then remove the battery cover: 3. Install the new battery pack, first insert the upper side (contacts), then the bottom side of the battery pack into the slot: 4. Reinsert the cover.
PAGE 8
BATTERIES AND MAINTENANCE 1 Installing, charging and/or any other action should be done by authorized personnel and following this manual. WARNING The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion.
PAGE 9
1 WARNING MEMOR™ X3 REGULATORY AND SAFETY Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to generate heat, explode or ignite. In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area with water and consult a doctor. Do not solder directly onto the battery pack.
PAGE 10
BATTERIES AND MAINTENANCE 1.3 1 CLEANING THE MOBILE COMPUTER Periodically clean the Memor X3 with a slightly dampened cloth. Do not use alcohol, corrosive products or solvents.
PAGE 11
MEMOR™ X3 REGULATORY AND SAFETY 2 2 WIRELESS AND RADIO FREQUENCIES WARNINGS Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. WARNING Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by Memor X3.
PAGE 12
WIRELESS AND RADIO FREQUENCIES WARNINGS 2 WARNING Turn this device OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy. WARNING RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle.
PAGE 13
MEMOR™ X3 REGULATORY AND SAFETY 3 3 REGULATORY INFORMATION Read this manual carefully before performing any type of connection to the Memor X3 mobile computer. NOTE 3.1 The user is responsible for any damage caused by incorrect use of the equipment or by inobservance of the indication supplied in this manual. GENERAL SAFETY RULES − Use only the components supplied by the manufacturer for the specific Memor X3 being used.
PAGE 14
REGULATORY INFORMATION 3.3 3 LASER SAFETY The laser light is visible to the human eye and is emitted from the window indicated in the figure. This information applies to both laser models and the Memor X3 Imager Aiming System.
PAGE 15
MEMOR™ X3 REGULATORY AND SAFETY 3 I D F E La luce laser è visibile all'occhio umano e viene emessa dalla finestra indicata nella figura. Die Laserstrahlung ist für das menschliche Auge sichtbar und wird am Strahlaustrittsfenster ausgesendet (siehe Bild). Le rayon laser est visible à l'oeil nu et il est émis par la fenêtre désignée sur l'illustration dans la figure. La luz láser es visible al ojo humano y es emitida por la ventana indicada en la figura.
PAGE 16
REGULATORY INFORMATION 3 ENGLISH The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your mobile computer. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN 60825-1 at the date of manufacture. For installation, use and maintenance, it is not necessary to open the device.
PAGE 17
3 MEMOR™ X3 REGULATORY AND SAFETY Non tentare di accedere allo scomparto contenete i componenti ottici o di farne la manutenzione. ATTENZIONE L’apertura dello scomparto, o la manutenzione di qualsiasi parte ottica da parte di personale non autorizzato, potrebbe violare le norme della sicurezza. Il sistema ottico può essere riparato solamente alla fabbrica.
PAGE 18
REGULATORY INFORMATION 3 Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschrieben werden, können ein gefährliches Laserlicht verursachen. ACHTUNG Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).
PAGE 19
3 ATTENTION MEMOR™ X3 REGULATORY AND SAFETY L’utilisation d’instruments optiques avec le scanneur augmente le danger pour les yeux. Les instruments optiques comprennent les jumelles, les microscopes, les lunettes et les verres grossissants. ESPAÑOL Las informaciones siguientes son presentadas en conformidad con las disposiciones de las autoridades internacionales y se refieren al uso correcto del terminal.
PAGE 20
REGULATORY INFORMATION 3.4 3 LED CLASS LED illuminator integrated in the Memor X3 models with SE-4500 imager engine are compliant with exempt risk group requirements according to EN62471:2008 and IEC62471:2006. 3.5 RADIO COMPLIANCE In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by the spectrum authorities of the specific country in which the installation takes place.
PAGE 21
MEMOR™ X3 REGULATORY AND SAFETY 3 − EN 301 489-17 V2.2.1: 2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
PAGE 22
REGULATORY INFORMATION 3 Latviski [Latvian] Ar šo Datalogic ADC S.r.l. deklarē, ka MEMORX3 atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šiuo Datalogic ADC S.r.l. deklaruoja, kad šis MEMORX3 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart Datalogic ADC S.r.l.
PAGE 23
3 3.5.2 MEMOR™ X3 REGULATORY AND SAFETY Information for the User ENGLISH Contact the competent authority responsible for the management of radio frequency devices of your country to verify any possible restrictions or licenses required. For further information, refer to the web site: http://ec.europa.
PAGE 24
REGULATORY INFORMATION 3.6 3 FCC COMPLIANCE FCC Interference Statement: • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 25
3 MEMOR™ X3 REGULATORY AND SAFETY IMPORTANT NOTE: FCC Radiation Exposure Statement This model device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.
PAGE 26
REGULATORY INFORMATION 3.7 3 INDUSTRY CANADA COMPLIANCE IC Interference Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
PAGE 27
MEMOR™ X3 REGULATORY AND SAFETY 3 3.8 SAR COMPLIANCE This product has been tested and found to comply with the following standards: - OET BULLETIN 65 SUPPLEMENT C: evaluating compliance with FCC guidelines for human exposure to radio frequency electromagnetic fields. - EN 62311:2008: assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz).
PAGE 28
REGULATORY INFORMATION 3.9 3 WEEE COMPLIANCE Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani.
PAGE 29
3   MEMOR™ X3 REGULATORY AND SAFETY éviter les retombées négatives pour l'environnement et la santé dérivant d'une élimination incorrecte récupérer les matériaux dans le but d'une économie importante en termes d'énergie et de ressources Pour obtenir des informations complémentaires concernant l'élimination, veuillez contacter le fournisseur auprès duquel vous avez acheté le produit ou consulter la section consacrée au site web http://www.datalogic.com.