Datalogic JoyaTM R2U “Ready to Use” User’s manual
Datalogic Mobile S.r.l. Via S. Vitalino 13 40012 - Lippo di Calderara di Reno Bologna - Italy Datalogic Joya™ - User's Manual Ed.: 12/2008 ALL RIGHTS RESERVED The Datalogic name and logo are registered trademarks of Datalogic S.p.A. in many countries. The JOYA name and logo are a trademarks of Datalogic Mobile S.r.l. All other brand and product names mentioned herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners.
CONTENTS DATALOGIC END USER LICENSE AGREEMENT ........................... V REFERENCES.................................................................................. VII Conventions ....................................................................................... vii Reference Documentation ................................................................. vii SAFETY REGULATIONS ................................................................ VIII General Safety Rules ...............................
3.7 3.7.1 3.7.2 3.7.3 3.8 3.9 Windows Connections....................................................................... 30 Microsoft® ActiveSync®.................................................................... 30 Bluetooth® Manager Device Setup................................................... 32 FTP Server Setup.............................................................................. 35 Backup Directory File Management .................................................. 36 Firmware Update.......
DATALOGIC END USER LICENSE AGREEMENT BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR BY USING DATALOGIC EQUIPMENT THAT INCLUDES THIS SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, THEN DO NOT DOWNLOAD, INSTALL, USE THE SOFTWARE NOR DATALOGIC EQUIPMENT.
and/or copyrighted material of Datalogic. Customer shall not disclose, provide, or otherwise make available such trade secrets or copyrighted material in any form to any third party without the prior written consent of Datalogic. Customer shall implement reasonable security measures to protect such trade secrets and copyrighted material. Software and documentation shall remain solely property of Datalogic. 6. Limited Warranty.
REFERENCES CONVENTIONS This manual uses the following conventions: “User” refers to anyone using a Datalogic Joya™ mobile computer. “Mobile computer” and "Datalogic Joya™" refer to Datalogic Joya™ mobile computer. “You” refers to the System Administrator or Technical Support person using this manual to install, configure, operate, maintain or troubleshoot a Datalogic Joya™ mobile computer. “Cradle” refers to Datalogic Joya™ Cradle Dispenser.
SAFETY REGULATIONS NOTE Read this manual carefully before performing any type of connection to the Datalogic Joya™ mobile computer. The user is responsible for any damages caused by incorrect use of the equipment or by inobservance of the indication supplied in this manual. GENERAL SAFETY RULES − Use only the components supplied by the manufacturer for the specific Datalogic Joya™ being used.
LASER SAFETY The laser light is visible to the human eye and is emitted from the window indicated in the figure. I La luce laser è visibile all'occhio umano e viene emessa dalla finestra indicata nella figura. D F Die Laserstrahlung ist für das menschliche Auge sichtbar und wird am Strahlaustrittsfenster ausgesendet (siehe Bild). Le rayon laser est visible à l'oeil nu et il est émis par la fenêtre désignée sur l'illustration dans la figure.
ENGLISH The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your mobile computer. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 Subchapter J and EN 60825-1:2001 at the date of manufacture. For installation, use and maintenance, it is not necessary to open the device. CAUTION Do not attempt to open or otherwise service any components in the optics cavity.
L'utilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione può provocare un'esposizione pericolosa a luce laser visibile. ATTENZIONE Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità intensa, ad esempio il sole.
Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch gegen reflektierende Oberflächen zu richten. CAUTION Die Verwendung von Optiksystemen mit diesem Scanner erhöht die Gefahr einer Augenbeschädigung. Zu optischen Instrumenten gehören unter anderem Ferngläser, Mikroskope, Brillen und Vergrößerungsgläser. FRANÇAIS Les informations suivantes sont fournies selon les règles fixées par les autorités internationales et se réfèrent à une correcte utilisation du terminal.
ESPAÑOL Las informaciones siguientes son presentadas en conformidad con las disposiciones de las autoridades internacionales y se refieren al uso correcto del terminal. NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER Este aparato resulta conforme a las normativas vigentes de seguridad láser a la fecha de producción: CDRH 21 CFR 1040 Sección y EN 60825-1:2001. No es necesario abrir el aparato para la instalación, la utilización o la manutención.
RADIO COMPLIANCE In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by the spectrum authorities of the specific country in which the installation takes place. Be absolutely sure that the system frequencies are correctly set to be compliant with the spectrum requirements of the country.
FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WIRELESS AND RADIO FREQUENCIES WARNINGS Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications or attachments could damage the product and may violate laws and regulations. WARNING Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals generated by Datalogic Joya™.
WARNING RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. WARNING An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area.
PATENTS This product is covered by one or more of the following patents. Design Pat.: EP 891,544. U.S. Pat. 5,992,740; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2 European Pat. 789,315 B1; 1,128,315 B1; 1,396,811 B1 Additional patents pending. WEEE COMPLIANCE Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani.
Information 2002/96/EC aux utilisateurs concernant la Directive Européenne Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures barré ne doit pas être éliminé avec les déchets urbains.
GENERAL VIEW A) Display* B) 6 keys keyboard C) TTL Serial connector D) Bumper E) Cold reset Hole F) Neck Strip Anchor *Remove protective film cover before use xx G) Loudspeaker H) Micro USB I) Laser window
xxi
INTRODUCTION 1 1.1 1 INTRODUCTION DATALOGIC JOYA™ DESCRIPTION The Datalogic Joya™ is a pocket-sized Windows powered mobile computer. This extremely compact, lightweight, and versatile device, combines fully integrated automatic data capture (1D bar code) and wireless communication capabilities, supporting nearly any application.
DATALOGIC JOYA™ 1 1.3 PACKAGE CONTENTS The Datalogic Joya™ package contains: − 1 Datalogic Joya™ mobile computer Remove all the components from their packaging; check their integrity and congruity with the packing documents. Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is not covered under the warranty. CAUTION Rechargeable battery packs are not initially charged.
CONNECTIONS 2 2.1 2 CONNECTIONS USB CONNECTION You can use any standard micro USB cable to directly connect the Datalogic Joya™ to a host computer to transfer data through the USB interface.
DATALOGIC JOYA™ 2 1 2.2 WLAN CONNECTION Datalogic Joya™ Wi-Fi 802.11 b/g radio models can communicate with the host using the on-board radio frequency component and an Access Point connected to the host computer. To launch this utility you can tap the specific icon if it's visible on the taskbar or you can open Connections folder or Control Panel from desktop and select the 'Summit Client Utility' icon.
CONNECTIONS 2 Wi-Fi module is on by default, in order to avoid wasting energy, you can switch it off using the Wireless Communications applet. NOTE NOTE NOTE Suspending the terminal powers off the 802.11b/g radio and drops the radio connection. When the terminal resumes, depending on the radio power mode and security protocol selected, it may take up to 30 seconds for the 802.11b/g radio driver to re-associate the radio to the network.
DATALOGIC JOYA™ 2 1 2.3 WPAN CONNECTIONS Bluetooth® Datalogic Joya™ mobile computer models can communicate with a Bluetooth® device, such as a printer, within a range of 10 m, using the on-board Bluetooth® module. Key: A) Datalogic Joya™ B) Bluetooth® printer NOTE NOTE In order to avoid wasting energy, the Bluetooth® module is off by default. If you need to have Bluetooth® working, the module must be powered on using the Wireless Communications applet (see par. 3.6.
USE AND FUNCTIONING 3 3 USE AND FUNCTIONING The use of the Datalogic Joya™ depends on the application software loaded. However there are several parameters that can be set and utilities that can be used to perform some basic functions such as data capture, communications, file management, etc. 3.1 STARTUP The Datalogic Joya™ turns on when a charged battery pack is inserted. As soon as the mobile computer is on, the Windows CE 5.0 desktop configuration will appear on the screen.
DATALOGIC JOYA™ 3 1 3.1.1 Using the Stylus (available only on Joya+TM) The stylus selects items and enters information. The stylus functions like a mouse. Double Tap: Touch the screen twice with the stylus to open items and select options. Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items. Tap and hold the stylus on an item to see a list of actions Tap-and-hold: available for that item.
USE AND FUNCTIONING 3.2 3 DATA CAPTURE To capture data first of all select the barcode icon on the bottom-right side of the display and tap the 'Capture' menu item then proceed with the following directions. To configure and enable data capture parameters refer to par. 3.5. 3.2.1 Laser Data Capture To scan barcodes, point the Datalogic Joya™ laser model onto the code from a distance within the reading range while pressing the “Up” key.
DATALOGIC JOYA™ 3 1 3.3 DESCRIPTION OF THE KEYS The Datalogic Joya™ provides a 6-key keyboard. The following image shows this keyboard. Main Keys Function + ”: it corresponds to ArrowUp Key. Key “ - ”: it corresponds to ArrowDown Key. Key “ Key “ Left Key “ Right ”: it corresponds to F1 (Function1) Key. ”: it corresponds to F2 (Function2) Key. = ”: it corresponds to ESC Key. Key “ e ” : it corresponds to ENTER Key.
USE AND FUNCTIONING 3.3.1 3 Resetting the Joya™ There are two reset methods for the Joya™. A warm boot terminates an unresponsive application and clears the working RAM, but preserves both the file system and the registry. A cold boot forces all applications to close and clears working RAM and files not resident on the persistent flash memory. Registry is restored from persistent memory if available or returned to factory default.
DATALOGIC JOYA™ 3 1 3.4 3.4.1 STATUS INDICATORS Taskbar The Taskbar provides information about the time, the battery level, the keyboard function, and the decoding status. ICONS DESCRIPTION Time and Battery Icons It displays the time. They are representative of five different icons indicating the battery level. The icon is partially green when the power left is >20% and partially red colored when the power left is <20%. It indicates that the battery is charging.
USE AND FUNCTIONING 3.5 3 DATA CAPTURE CONFIGURATION From the Taskbar, tap the "Decoding" icon to open a drop–down menu. Decoding can also be accessed from the Control Panel. By selecting the Info item from this drop-down menu you can access information about the Scanner and the Software; the Configure item opens the configuration applet (Data Capture Configuration Window), while Capture accesses the data capture applet (Data Capture Window), which enables code reading.
DATALOGIC JOYA™ 3 1 Data Capture Configuration Window The screen format shows two columns where the left column indicates branches or parameters. Branches have three dots in the right column (...). You can navigate through the tree structure using the stylus or keyboard arrows directly on the item field or from the menu. Parameters have their corresponding current values in the right column. You can edit parameter values using the stylus or keyboard arrows directly on the item field or from the menu.
USE AND FUNCTIONING 3 Reader Parameters The barcode reading parameters and values are dependent upon the type of scanner module mounted in your mobile computer. For a detailed list of parameters and of their configuration procedures, please refer to the SDK Help file on the CD. Scan Parameters The Scan Parameters are common to all scanner modules and allow control of the scanning device.
DATALOGIC JOYA™ 3 1 Default Settings The following tables contain the default values for the major barcode setup parameters, according to the type of scan engine mounted on the mobile computer. For a complete list of parameters and of their configuration procedures, please refer to the SDK Help file on the CD.
USE AND FUNCTIONING 3.5.2 3 Capture The Data Capture applet (Capture) enables code reading. Data Capture Window Data Capture can also be enabled through the Configuration applet by selecting File ->Scanner from the main menu, or by enabling the parameter Scan Always On in the Scan Parameters branch.
DATALOGIC JOYA™ 3 1 3.6 CONTROL PANEL From the Desktop, double tap on the "My Device" icon and then double tap on the "Control Panel" icon to open the control panel main window. The Control Panel can also be launched from Start ->Settings ->Control Panel. APPLET programs are displayed as icons; one icon corresponds to each APPLET. Control Panel 3.6.1 Registry The REGISTRY ADMIN applet provides management of Windows CE 5.0 registry.
USE AND FUNCTIONING 3 Registry Administration Window 19
DATALOGIC JOYA™ 3 1 3.6.2 Files Admin The FILES ADMIN applet enables control of the permanence of files in the System Folder. Two functions are available on the Files Admin Main window by means of two buttons: Files Admin Main Window Save Session: with this button all files will be permanently saved in the \Windows directory in non-volatile memory.
USE AND FUNCTIONING 3 Safe Setup First Mask Then select \Windows or a relevant sub-directory in the path box. Then, Safe Setup will recognize the new files and directories present in the \Windows directory, and will copy them to the \Backup\Windows directory. At the next cold boot, these files will be restored (see par. 3.8). - Simply skip the first mask either by closing it or by pressing the ESC key.
DATALOGIC JOYA™ 3 1 3.6.3 Wireless Communications The WIRELESS COMMUNICATIONS applet provides management of the 802.11 b/g radio and of the Bluetooth® module. Select the WIRELESS COMMUNICATIONS applet by double tapping the Wireless Communications icon.
USE AND FUNCTIONING 3.6.4 3 Using Summit Radio Card Utility The Joya Summit WiFi card provides a useful client utility suitable for radio configuration and site survey purposes. Summit Radio Card : Starting client The client can be started from the Windows CE desktop by clicking the related icon of the tool bar at the bottom. Fig. 1 : Summit client utility Summit Radio Card : Main screen The following picture shows the screen when Summit Client is started Fig.
DATALOGIC JOYA™ 3 1 The Active Profile window displays the current profile and lets user to change it. The Disable Radio button turns off the radio card; after deactivation the same button changes to Enable Radio so the radio can be reactivated. To close the application, press the close button at upper-right corner of window. Summit Radio Card : Profile screen Radio card is managed through radio profiles. Fig.
USE AND FUNCTIONING 3 Summit Radio Card : Status screen This screen shows the radio status related to the profile currently used. Fig. 4 : Status screen User can read current profile name, client device name, IP address and MAC address. The Access Point to which the terminal is currently associated t is specified by name, IP address and MAC address. User can also read the signal strength (dBm), the transmission power (mW), the WiFi channel, the rate (Mbps) and the signal quality.
DATALOGIC JOYA™ 3 1 Summit Radio Card : Diagnostic screen This screen allows user to interact with radio card to perform simple and useful functionalities. Fig. 5 : Diagnostic screen The (Re)connect button disables and re-connects radio card. The Release/Renew button releases and renews the radio interface IP address. In order to test the radio link, user can ping the associated access point by pressing the Start Ping button. Fig. 6 : Start Ping Fig.
USE AND FUNCTIONING 3 The Diagnostic button displays the radio configuration and dumps available profiles Site Survey functionality is not available. Summit Radio Card : Global Settings screen There are many other parameters used to configure the radio card and they do not depend on used profile, nevertheless for good working it’s recommended do not change the default values. Fig.
DATALOGIC JOYA™ 3 1 3.6.5 Stylus Calibration (available only on Joya+™) You might need to recalibrate the touch screen (i.e. when you attempt to select one item with the stylus, another item is erroneously selected). To recalibrate the touch screen, complete the following steps: 1. Select Start > Settings > Control Panel > Stylus to open the Stylus Properties dialog as shown in Figure 1. 2. Adjust Double-Tap sensitivity if needed or desired. 3.
USE AND FUNCTIONING 3 Figure 2 Startup stylus calibration When starting the terminal, a stylus calibration screen comes up if valid calibration settings are not available. This happens in the following circumstances: 1. 2. 3. 4. At the first startup of the terminal. After restoring registry default settings using the applet Registry Admin and performing a warm boot. After a Clean Boot. After a Firmware Update (see par. 3.9).
DATALOGIC JOYA™ 3 1 3.7 WINDOWS CONNECTIONS To connect the Datalogic Joya™ to another device (i.e. Host PC) from Windows, several programs are available. 3.7.1 Microsoft® ActiveSync® ® ® Microsoft ActiveSync gives you the possibility to connect your desktop computer to your Datalogic Joya™ and synchronize the information on them. Synchronization compares the data on the Datalogic Joya™ with that on the desktop computer and updates both computers with the most recent information.
USE AND FUNCTIONING 3 ActiveSync® Remote NOTE Microsoft® ActiveSync® Remote is no longer supported in Windows CE. For backward compatibility you can download it from the Internet. We suggest enabling the FTP Server and connecting to an FTP Client. See par. 3.7.3.
DATALOGIC JOYA™ 3 1 3.7.2 Bluetooth® Manager Device Setup In order to enable a Bluetooth® device for communication with the Datalogic Joya™ you must perform the discovery procedure and enable the device as follows: 1. Place the Bluetooth® device within the range of the Datalogic Joya™ (10 meters). 2. From the “Control Panel” main window double tap on the “Bluetooth” applet ® to open the Bluetooth Manager Device window: 3.
USE AND FUNCTIONING 4. 3 Tap on the “Discovery” button to enter the related window; then, tap on the “Scan” button to run the Discovery procedure: Once the Discovery procedure has been completed, select the desired Bluetooth® device from the list. It is also possible to digit (12 hexadecimal digits) the Bluetooth® address of the desired device by tapping on the “Add” button. The “Clear” button deletes all discovered devices from the list. 5.
3 1 6. 34 DATALOGIC JOYA™ icon Hide the Bluetooth® Manager Device window by tapping on the available on each window or close it through the “Close” button available in the “Me” window (see step 3 of this procedure).
USE AND FUNCTIONING 3.7.3 3 FTP Server Setup The Datalogic Joya™ Operating System includes a sample File Transfer Protocol (FTP) server. FTP is used for copying files to and from remote computer systems over a network using TCP/IP. You can establish a connection to your Datalogic Joya™ using its FTP Server through the following interfaces: WLAN using the WiFi radio Proceed as follows: 1. Create a registry file (extension .reg) to setup and enable FTP Server communication.
3 1 3.8 DATALOGIC JOYA™ BACKUP DIRECTORY FILE MANAGEMENT All of the Windows CE 5.0 system files reside in RAM (volatile memory) except for the Backup directory, which resides in FLASH (non-volatile memory). Therefore the contents of the Backup directory are persistent even if the mobile computer is re-booted or the battery pack is changed. You can save your more important files that you don't want to lose due to mobile computer re-boot, in the Backup directory or create a sub-directory within Backup.
USE AND FUNCTIONING 3.9 3 FIRMWARE UPDATE The Datalogic Joya™ is equipped with a tool that implements a firmware update service. This tool, called Datalogic Updater (DLUpdater), is compatible with all hardware versions of the following WindowsCE 5.0 models: Datalogic Skorpio™; Datalogic Jet™; Datalogic Kyman™; Datalogic Joya™ Datalogic Memor™. The DLUpdater, that is automatically invoked at startup, searching for a potential update file (DLUpdate.bin).
DATALOGIC JOYA™ 3 1 Firmware Update Procedure 1. Download the update from the web site (see previous par.). It is a zip file containing the files: • DLUpdater.exe – that starts the update; • DLUpdate.bin – binary file containing the updated firmware; 2. Copy the files DLUpdater.exe (optional) and DLUpdate.bin in folder “\BACKUP”. 3. Open the folder “\BACKUP” on the terminal and run DLUpdater.exe (double tap the icon). 4. The message shown in figure 1 will come up on the screen.
USE AND FUNCTIONING 3 the data stored in the backup folder will be irreparably lost. It is therefore recommended to run a backup of the data you want to preserve before starting a firmware update.
DATALOGIC JOYA™ 4 1 4 MAINTENANCE Battery packs are not initially charged. Therefore the initial operation to perform is to charge them. See below. NOTE CAUTION 4.1 By default, the battery pack is disconnected at the factory to avoid damage due to excessive draining. Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and ensures maximum performance.
MAINTENANCE 4.2 4 REPLACING THE BATTERY PACK To correctly replace the battery pack, proceed as follows. 1. Unscrew the two screws placed on the back bottom. The battery pack cover is now released.
4 1 DATALOGIC JOYA™ 2. Remove the cover and then the battery pack, using the proper plastic strip. Pay attention when disconnecting the connector. 3. Install the new battery pack, first insert the connector respecting the right way, then the upper side, finally the bottom side, leaving the plastic strip available for future replace. 4. For correct locking, first insert the upper part of the battery cover, then the lower and rotate the screws to the horizontal position.
MAINTENANCE 4 To install, charge and/or do any other action on the battery, follow this manual. WARNING The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to abusive conditions. If the battery pack is replaced with an improper type, there is risk of explosion.
DATALOGIC JOYA™ 4 1 In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the contact occurs, immediately wash the affected area with water and consult a doctor. WARNING Do not solder directly onto the battery pack. Do not expose the battery pack to liquids. Avoid any knocks or excessive vibrations.
JOYA CRADLE DISPENSER 5 JOYATM CRADLE DISPENSER 5.1 Joya 5 INTRODUCTION TM Cradle Dispenser has the following responsibilities: to recognize the insertion and extraction of the Joya to control the blocking device to signal status using the LEDs to supply power to the Joya for battery recharging Joya Cradle Dispenser has three Joya slots, each equipped with its own control unit, an electromechanical system for blocking/releasing the terminal, notification light, battery power and recharging circuits.
DATALOGIC JOYA™ 5 1 5.3 INSTALLATION REQUIREMENTS The figure below represents an 8 Joya Cradle Dispenser Base Unit organized in a single column. Joya will be inserted into the Cradle Dispensers are at a minimum height of approximately 40 cm. from the floor and a maximum height of about 160 cm. from the floor.
JOYA CRADLE DISPENSER 5.3.1 5 Base Unit Construction Details All of the dimensional quotes necessary for building and correctly mounting the supporting crosspieces and fixing blocks for the Joya Cradle Dispensers are indicated. The zoom of the upper edge of the supporting crosspiece indicates the necessity of reducing the radius of this edge as much as possible in order to provide a stable contact surface for the upper cover of the Joya Cradle Dispenser.
DATALOGIC JOYA™ 5 1 Suggestion: The cradle fixing blocks shown in the figures are mounted to the supporting crosspieces under the Joya Cradle Dispensers. Their purpose is to prevent the Joya Cradle Dispensers from falling inside the cabinet during the mounting phase in which the Joya Cradle Dispensers may not be correctly positioned before fixing them. 5.3.
JOYA CRADLE DISPENSER 5.3.3 5 Internal Cabinet Space and Openings The space between the rear of the Joya Cradle Dispensers and the back part of the cabinet must be left for two reasons: • it must be possible to retrieve objects that accidentally fall through the cradles from the floor behind the cabinet. • there must be a zone for air to freely circulate behind the Joya Cradle Dispensers to aid their cooling during operation.
DATALOGIC JOYA™ 5 1 The opening at the top of the cabinet must be covered with a grill or mesh, which allows air to flow freely but protects against access to the inside of the cabinet. In this way the power supplies can not be reached externally. Power Supplies • a single 300 W power supply capable of supplying all 8 Cradle Dispensers (91ACC1000 Power Supply 12V 300W).
JOYA CRADLE DISPENSER 5.3.7 5 Wiring To wire the Joya Cradle Dispensers, pre-wired power junction cables are provided as accessories (91ACC0730 Power Junction Cable I90x/3 Cradle -8 pcs.), which are ready to be connected to the power connector at the bottom of the Joya Cradle Dispenser.
DATALOGIC JOYA™ 5 1 These wiring connections must be made with particular care and meet or exceed the nominal current and power specifications; the current flowing through them is 2.5 A per Joya Cradle Dispenser. The wires must meet the Safety Normatives currently in force. The following table indicates the maximum current specifications for some wire conductor sections according to the EN 60950 Electrical Safety Normative. Maximum Current 10 A 16 A 25 A Wire Section 1 mm² 1.5 mm² 2.
JOYA CRADLE DISPENSER 5.3.9 5 Affixing Cables to Cabinet The ends of the junction cables that are connected to the main cable groups must be affixed to the cabinet sides so as to guarantee the following conditions: • it must be possible to extract the Joya Cradle Dispenser from the front of the cabinet while the cable is connected so that the connector can be plugged in or out of the Cradle Dispenser from outside the cabinet.
5 1 Humidity: • DATALOGIC JOYA™ 90% non condensing Cabinet The cabinet must not have any exposed sharp edges, which could represent a danger to customers. The requirements for air passages to cool both the JoyaCradle Dispensers and the power supplies must be adhered to in order to avoid overheating problems for the components inside the cabinet. All components having dangerous voltage levels must be protected from unauthorized access.
JOYA CRADLE DISPENSER 5 JOYATM CRADLE DISPENSER FIRMWARE 5.4 Joya Cradle Dispenser is provided with a full operational Firmware, therefore it doesn’t require any kind of software devoloping activitiy Instead, the behaviour of the Joya Cradle Dispenser could be controlled at high level using the Joya. In SDK Tools is furnished APC.exe program, to upgrade Joya Cradle Dispenser firmware release. 5.4.1 APC installation By using ActiveSync copy in the \BACKUP folder the following files: • • • 5.4.2 APC.
DATALOGIC JOYA™ 5 1 5.4.3 Reading firmware version Select the “Read version” by pressing the upper-right key. APC will display the message on the left. Insert in any cradle’s slot and the result will look as the right picture. Cradle locks terminal in the slot, the terminal top flashes three times. At the end approach a magnet to the sensitive area to unlock and extract the terminal. If user does not insert Joya into a slot, a timeout message is displayed asking to remake the operation.
JOYA CRADLE DISPENSER 5.4.4 5 Firmware update procedure Select “Update” from main menu and insert the terminal into the rightmost slot of the cradle. The cradle locks the terminal and APC transfers firmware, during this period slot leds flashes. At the end the terminal top flashes three times, approach a magnet to the sensitive area to unlock and extract the terminal. APC shows a suitable message to inform user if update is correctly completed or an error has been occurred. 5.
DATALOGIC JOYA™ 5 1 5.6 CONFIGURATION Joya Cradle Dispenser should be previously configured using an apposite program: ABC.exe (see SDK Help for more information). In a typical application there is the need to identify in a unique way each cradle slot, in order to be able to perform selective operations.
JOYA/JOYA+ TECHNICAL FEATURES 6 6.1 6 JOYATM/JOYA+TM TECHNICAL FEATURES TECHNICAL DATA TM Datalogic Joya /Joya+ Common Features Electrical Features Power Battery Pack Communication Features Bluetooth® Interface**** Serial Interface Wireless Features WLAN WPAN Environmental Features Working Temperature* Storage Temperature Humidity** Drop Resistance*** Hardware Features FLASH RAM Microprocessor**** Audio**** LEDs**** Display**** Keyboard**** 2 cell Li-Pol 2200 mAh@3.
DATALOGIC JOYA™ 6 1 Mechanical Features Dimensions (LxWxH) Weight Programming Features Operating system Laser Optical Features Light source laser scanner Scan rate Safety class Decoding features Decoded barcodes 1D 60 149 x 73 x 44 mm 255 g (incl. battery) Windows CE 5.
TEST CODES 7 7 TEST CODES High Density Codes 0.
DATALOGIC JOYA™ 7 1 Medium Density Codes 0.
TEST CODES 7 Low Density Codes 0.
GLOSSARY Access Point A device that provides transparent access between Ethernet wired networks and IEEE 802.11 interoperable radio-equipped mobile units. Hand-held mobile computers, PDAs or other devices equipped with radio cards, communicate with wired networks using Access Points (AP). The mobile unit (mobile computer) may roam among the APs in the same subnet while maintaining a continuous, seamless connection to the wired network.
A computer that serves other mobile computers in a network, providing services such as network control, database access, special programs, supervisory programs, or programming languages. Liquid Crystal Display (LCD) A display that uses liquid crystal sealed between two glass plates. The crystals are excited by precise electrical charges, causing them to reflect light outside according to their bias. They use little electricity and react relatively quickly.
INDEX A M Accessories; 2 ActiveSync® Remote; 31 Maintenance; 40 Microsoft® ActiveSync®; 30 Model Description; 1 B Backup Directory File Management; 36 Bluetooth® Manager Device Setup; 32 P Package Contents; 2 Patents; xvii R C Charging the Batteries; 40 Cleaning the Mobile Computer; 44 Connections; 3 Control Panel; 18 Conventions; vii Radio Compliance; xiv Reader Parameters; 15 Reference Documentation; vii References; vii Registry; 18 Replacing the Batteries; 41 Resetting the Joya™; 11 D Data Captur
Datalogic Mobile S.r.l. Via S.
Datalogic Mobile S.r.l. Via S.