GRYPHON™ M SERIES QUICK REFERENCE
DATALOGIC S.p.A. Via Candini 2 40012 - Lippo di Calderara di Reno Bologna - Italy GRYPHON™ M Series Ed.: 11/2005 ALL RIGHTS RESERVED Datalogic reserves the right to make modifications and improvements without prior notification. Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material.
CONTENTS Updates and Language Availability.....................................................................iv Using GRYPHON™ M ........................................................................................ 1 Charging the Batteries ........................................................................................ 2 GRYPHON™ M Configuration ............................................................................ 3 Using Multiple Readers with Same Cradle.................................
UPDATES AND LANGUAGE AVAILABILITY UK/US The latest drivers and documentation updates for this product are available on Internet. Log on to : www.datalogic.com I Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Questo manuale è disponibile anche nella versione italiana. Collegarsi a : www.datalogic.com F Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet. Ce manuel est aussi disponible en version française.
GRYPHON™ M SERIES USING GRYPHON™ M SERIES READERS The Gryphon™ M series reader, paired with an OM-Gryphon™ cradle, builds a Cordless Reading System for the collection, decoding and transmission of barcoded data. Gryphon™ M readers automatically scan barcodes at a distance. Simply aim and pull the trigger. Code scanning is performed along the center of the light bar emitted from the reading window. This bar must cover the entire code.
DATALOGIC CHARGING THE BATTERIES By placing the reader onto the OM-Gryphon™ cradle or C-Gryphon™ battery charger it is possible to charge the Gryphon™ M batteries. Make sure the charging LED goes on. The LEDs positioned on the cradle signal the charge status, as described in the following table: LED STATUS Yellow On = OM-Gryphon™ is powered. Power on / Yellow Blinking = OM-Gryphon™ receives data and Data commands from the Host or the reader. Red On = the battery charge is in progress.
GRYPHON™ M SERIES When the above procedure is no longer effective, the batteries must be changed. To change the batteries of your reader, unscrew the battery cover screw, replace the old batteries with new ones, then insert the cover in the handle and screw it back into place. (See the following figures). + CAUTION Dispose of the batteries as required by the relevant laws in force.
DATALOGIC Exit and Save configuration 4. 5. Ì$-?Î Read the Bind code to pair the Gryphon™ M to the OM-Gryphon™ cradle. The reader is dedicated to the cradle. Any previously bound reader will be excluded. To connect several readers to the same cradle see the following section "Using Multiple Readers with Same Cradle". Bind Ì$+RN0$-IÎ The green LED on the Gryphon™ M will blink: the reader is ready to be positioned onto the cradle. 6.
GRYPHON™ M SERIES USING MULTIPLE CRADLE READERS WITH SAME If you want to use several readers associated with the same cradle, you must first Bind the cradle with one of the readers (see previously described configuration procedure). Successive readers can be associated with the same cradle by following the configuration procedure substituting the Bind command with Join. Join 5. Ì$+RN1$-NÎ The green LED on the Gryphon™ M will blink: the reader is ready to be positioned onto the cradle.
DATALOGIC GRYPHON™ M DEFAULT CONFIGURATION DATA FORMAT code identifier disabled (enabled for POS terminals), field adjustment disabled, code length tx not transmitted, character replacement disabled. POWER SAVE scan rate 270 scans/s. READING PARAMETERS operating mode hand-held, hardware trigger, trigger active level, no timeout, Flash On = 1 sec, Flash Off = 0.6 sec, one read per cycle, safety time 0.
GRYPHON™ M SERIES TECHNICAL FEATURES Electrical Features Battery Type Time of recharge NiMh Operating autonomy (typ. continuous reading) Indicators Max scan rate Optical Features Sensor Illuminator Wavelength Max. LED Output Power Reading field Max. resolution PCS minimum Radio Features Working frequency Bit rate Range (in open air) System Configuration Maximum number of devices per base stations Max.
DATALOGIC WARRANTY Datalogic warranties this product against defects in workmanship and materials, for a period of 24 months from the date of shipment, provided that the product is operated under normal and proper conditions. Datalogic has the faculty to repair or replace the product, these provisions do not prolong the original warranty term. The warranty does not apply to any product that has been subject to misuse, accidental damage, unauthorized repair or tampering.
GRYPHON™ M SERIES COMPLIANCE This device must be opened by qualified personnel only. The batteries must be removed before opening the device. CLASS 1 LED PRODUCT EN60825-1:(2001) SEE PACKAGE FOR PATENT LISTING Contains FCC ID: OMJ0015 This device complies with PART 15 of the FCC Rules.
DATALOGIC RADIO COMPLIANCE Contact the competent authority responsible for the management of radio frequency devices of your country to verify the eventual necessity of a user license. Refer to the web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm for further information.
GRYPHON™ M SERIES READING DIAGRAMS GRYPHON™ M100 (STANDARD) M100 (STD) - Reading Zones (10° skew angle) 15 0.13 mm (5 mils) 10 5 CODE 39 0.076 mm (3 mils) 0 CODE 39 0.13 mm (5 mils) EAN13 M=1 0.33 mm (13 mils) CODE 39 0.50 mm (20 mils) -5 -10 -15 0 5 10 15 20 25 30 35 (cm) GRYPHON™ M200 (PDF) M200 (PDF) - Reading Zones (10° skew angle) 10 0.13 mm (5 mils) 5 CODE39 CODE39 0.076 mm 0.13 mm (3 mils) (5 mils) 0 EAN13 M=1 0.33 mm (13 mils) CODE39 0.
DATALOGIC NUMERIC TABLE Ì01Î 0 Ì12Î 1 Ì23Î 2 Ì34Î 3 Ì45Î 4 Ì56Î 5 Ì67Î 6 Ì78Î 7 Ì89Î 8 Ì9:Î 9 12
DATALOGIC S.p.A.