GRYPHON™ M SERIES READERS Quick Reference Installazione Rapida Manuel d'Installation Rapide Schnellinstallation Manual de Instalación Rápida
DATALOGIC S.p.A.
CONTENTS Services Available at Our Website .................................................................2 Using Gryphon™ Readers .............................................................................3 Charging the Batteries....................................................................................4 Gryphon™ Configuration................................................................................5 Gryphon™ Default Configuration..........................................................
INHALTSVERZEICHNIS Verfügbar auf Unserem Web Site.................................................................30 Beschreibung und Gebrauchsanweisung .....................................................31 Ladung der Akkus ........................................................................................32 Gryphon™ Konfiguration ..............................................................................33 Gryphon™ - Grundeinstellung ...............................................................
GRYPHON™ M SERIES READERS Quick Reference
English SERVICES AVAILABLE AT OUR WEB SITE: By completing the electronic form at our website, www.datalogic.com/hhd/gryphon_utilities.htm, you have free access to download the following items: • WinSetPlus™ WinSetPlus™ is a Windows-based utility program which allows device configuration using a PC. It provides RS232 interface configuration as well as configuration barcode printing. • Loader: The Loader utility program is necessary to load the application software (upgrades) onto your reader.
English USING GRYPHON™ READERS The Gryphon™ M series reader, paired with an OM-GRYPHON cradle, builds a Cordless Reading System for the collection, decoding and transmission of barcoded data. GRYPHON™ readers automatically scan barcodes at a distance. Simply aim and pull the trigger. Code scanning is performed along the center of the light bar emitted from the reading window. This bar must cover the entire code.
English CHARGING THE BATTERIES Once the OM-GRYPHON is connected and powered, the yellow LED goes on, then you can charge the reader’s batteries. Place the Gryphon™ into the OM-GRYPHON cradle. The red charging LED on the cradle goes on. The battery is completely charged when the green LED on the cradle goes on (see below).
English When the above procedure is no longer effective, the batteries must be changed. To change the batteries of your reader, unscrew the battery cover screw, replace the old batteries with new ones, then insert the cover in the handle and screw it back into place. (See the following figures). CAUTION Risk of explosion if battery is replaced with an incorrect type. Dispose of the batteries as required by the relevant laws in force.
English Exit and Save configuration i i i 4. 5. k k k Read the Bind code to pair the Gryphon™ to the cradle. The reader is dedicated to the cradle. Any previously bound reader will be excluded. Bind i i i 3/ *k 3/ *k 3/ *k The green LED on the Gryphon™ will go on: the reader is ready to be inserted into the cradle. 6.
English GRYPHON™ DEFAULT CONFIGURATION POWER SAVE scan rate 270 scans/s READING PARAMETERS operating mode hand-held, hardware trigger, trigger active level, no timeout, Flash On = 1 sec, Flash Off = .6 sec, one read per cycle, safety time .
English TECHNICAL FEATURES Electrical Features Battery Type 2 AA NiMh* batteries 1.2 V – 1400 mAh 3 hours max Time of recharge NiMh Operating autonomy 6.000 reads - NiMh (typ. continuous reading) Indicators LED, Good Read Spot, Beeper Optical Features Sensor CCD solid state (3648 pixels) Max scan rate 270 scans/sec Reading field see reading diagram (p.47) Max. resolution 0.076 mm, 3 mils PCS minimum 15% (Datalogic Test Chart) European Models USA Models Radio Features Working frequency 433.
English WARRANTY Datalogic warranties this product against defects in workmanship and materials, for a period of 24 months from the date of shipment, provided that the product is operated under normal and proper conditions. Datalogic has the faculty to repair or replace the product, these provisions do not prolong the original warranty term. The warranty does not apply to any product that has been subject to misuse, accidental damage, unauthorized repair or tampering.
English INFORMATION TO THE USERS This device must be opened by qualified personnel only. The batteries must be removed before opening the device. Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules.