User's Manual

Features:
• BLUETOOTH® wireless technology
• Worldwide Usage
• fully-integrated Human Interface Device (HID)
• Optimized of power
• Full function keys
• Power saving system design
• Auto-reconnect
• No compliance issues
• Fully compliant with the version 2.0 BLUETOOTH® wireless technology specification
• Supports the key BLUETOOTH® wireless technology version 2.0 features, including
adaptive frequency hopping and fast connection
Specification :
• Key switch: Rubber conductor structure
• Key life:2 million cycles
• Keys Pitch: 19 mm
• Key number:18/19 keys
• Dimension:95*125*25 mm (L*W*H)
• Weight:Keypad:140g
• Power:2”AA” Batteries
• Standby mode: 0.4mA
• Operating mode:2.6mA
• Sleeping mode: 0.14mA
• Lower Battery: Under 2V
• Frequency:2.4GHz ISM band
• Range: Up to 10 meters
Use general Bluetooth Keypad :
1 Open the battery cover located on the back of the
Keyboard，and install 2 AAA batteries
2 Turn on the power of Keypad.
3 Press Connector button 1 second behind keyboard, Bluetooth Keyboard
will become Discoverable (This state could hold 20 seconds; if overtime,
the Keyboard will enter the sleep mode automatically)
4 Fast double click the dongle button, dongle will glimmer with Bule
LED at the moment.
5 Input Password and then press the “Enter” key on Keyboard. the Blue LED
has changed from normal speed to fas then off LED..
6 Then Bluetooth Keypad has already connect to PC , it’s okay
for use.
7 If Bluetooth Keypad could not been Discovered or Low Battery LED always
on , please exchange new batteries.
Notes:
z If you don’t use the keyboard for a long time, please turn off power for
saving.
z It will take three seconds from sleep mode to operation mode when you
press the keys.