Installation Manual

3/31/08 Rev. 1 WEB
Instruction / Installation Sheet
DataComm Electronics Bracket-Mounted 2 GHz Splitters
70-0034 / 70-0036 / 70-0038
Video
 Attach a female F-connector onto the cable TV service or satellite
service incoming cable.
 Screw the incoming cable with F-connector on the splitter F-connector
marked “input”.
 Using F-connectors, terminate all coaxial leads that have been pulled
through the enclosure opening to the video splitter.
 Screw these coaxial leads on the splitter F-connectors marked
“output”.
 Align the four mounting pins with holes in the back of the panel (upper
most position recommended) and snap into place.
ONLY LICENSED PROFESSIONALS SHOULD INSTALL THIS PRODUCT
DataComm Electronics, Inc.
6349 Peachtree St.
Norcross, GA 30071-1725
888.223.7977
770.662.8205
www.datacommelectronics.com
ETL LISTED
CONFORMS TO
UL STD 1863
ANSI/UL STD 60950-1
CERTIFIED TO
CAN/CSA STD C22.2 NO 60950-1
3026001