User's Manual
90mm
128mm
Audio Chatpad
USER MANUAL
Xbox One™ X / S & Elite
For use with
EN
Package Contents:
• Wireless Chatpad x 1
• Wireless Dongle x 1
• User Manual x 1
3.5mm Audio Connector
Keyboard
To rectangular expansion port
(Connect to Xbox One Controller Audio Port) (Connect to Xbox One Controller)
3.5mm Audio Port LED
ON/OFF
Wireless Dongle
Foldable Audio Connector
Specification:
2.4G wireless keyboard easily connects to the Xbox One Console
Enables most wired stereo headsets to work with your Xbox One
Controller.
Easily adjust audio without taking your hands off the controller.
Controls include volume up/down, microphone mute, and
speaker mute.
Connects to the bottom of the Xbox One Wireless Controller
and features a 3.5mm audio jack for your wired headset to plug
into.
Microphone mute, and speaker mute LED indication.
Powered by the controller.
•
•
•
•
•
•
•
Setting up the Chatpad:
Following this illustration, line up the connector of the chatpad
with the rectangular expansion port at the bottom o
f the Xbox
One Controller.
1.
Removal from the Xbox One Controller:
Please following this illustration carefully: Gently lift the bottom
of the Chatpad in the direction shown (up).
1.
While lifting up, gently pull the chatpad out from the Xbox One
controller at the same time.
2.
Carefully insert the expansion port and 3.5mm audio connector
(if required) to the expansion port and audio port of Xbox One
Controller.
If connecting the Chatpad to the original Xbox One Controller
(without 3.5mm audio port), Fold the 3.5mm Audio connector into
the Chatpad before installing.
If connecting to the updated Xbox One Controllers (with 3.5mm
audio port), take the 3.5mm audio connector out of the Chatpad
before installing, as shown below.
2.
Pairing the Chatpad to the Console:
Insert the wireless dongle in to the USB port of the Xbox One
console.
Switch the ON/OFF switch to the ON position. The LED on the
Chatpad will start flashing quickly and begin automatically
searching for the wireless dongle. Once successfully connected,
the LED will stop flashing.
1.
2.
Keyboard Function:
After successfully connecting to the console, the Chatpad will
input as a standard keyboard.
Simply press each button to input the lowercase letters.
Holding the Shift button, and then pressing a letter will input
capital letters.
Press the Function button
once, the function button LED will
turn ON, the Chatpad will then input the numbers and symbols
(shown at the top left of each button). Press the Function button
again to turn it OFF.
1.
2.
3.
4.
Function Button
Shift Button
Audio Function:
Connect your headset (4pin 3.5mm connector) to the audio port
of the Chatpad. (The microphone function will be not work If the
headset only has a 3pin connector).
Make sure the Chatpad is switched ON.
Use the Volume UP/DOWN buttons to adjust the output volume.
PLEASE NOTE: Audio functions only compatible with Official Xbox
One controllers with the 3.5mm audio port.
1.
2.
3.
Precaution and maintenance:
Store in a cool, dry & dust free area.
Do not store in areas of extreme low temperatures (0ºC) or high
(40ºC).
Avoid direct sunlight and heat sources.
Do not allow the product to get wet or dirty; doing so may cause
damage.
Do not clean with benzene, paint thinner, acetone, alcohol or
other solvents.
Do not take the product apart; doing so will void your warranty
and may cause electrical shock or damage to internal
components.
Please help to conserve the enviroment by recycling the
cardboard packaging of this product.
This product should NOT be disposed of in normal household
waste it should be disposed of
separately. Please take it to an
electrical waste collection point.
Microphone
Mute
Speaker
Mute
Volume UP
Volume Down
•
•
•
•
•
•
•
•
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly
approved by the part responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by tuming the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
This device complies with part 15 of the FCC Rules.