ZNID-GPON-2427A1 All Rights Reserved.
Introduction The ZNID-GPON-2427A1 is a high-speed Gigabit PON. It provides sufficient bandwidth for high performance connection to the Internet. The ZNID-GPON-2427A1 provides one Gigabit PON interface, 4 GE LAN port, 2 FXS port, 1 USB(2.0) port,2.4G(802.11b/g/n)WIFI interface, 1 ups port, and a CATV port. The gigabit pon are used for connecting to computers, through which you can access the Internet.
Parameter Specifications Extinction ratio(min):10.5dB Downstream(data): Speed:2.488Gbps Center wavelength :1490nm Receiving sensitivity :<=-28.5dBm Signal deassert (min):-40dBm Signal Assert(max):-29dBm SFF 8472 V9.5 Fiber:G652 single mode fiber Connector:SC/APC Downstream(CATV): Band:analog channel 47MHz~870/1002MHz Center wavelength :1550nm Optical Input Power -8~2dBm Connector:SC/APC Ethernet interface Wireless Features(2.4G) Standard: ITU-T G.984.5 Class B+ IEEE 802.11 IEEE 802.
Parameter Specifications Modulation schemes External Connectors Environment 802.11g: 64QAM, 16QAM, QPSK, BPSK, DSSS 802.11b: CCK, DQPSK, DBPSK HT20: 64 QAM, 16QAM, QPSK, BPSK HT40: 64 QAM, 16QAM, QPSK, BPSK Wireless data rate 802.11b: 11, 5.5, 2, 1 Mbps per channel, auto fallback for extended range 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps per channel, auto fallback for extended range 802.11n: up to 140Mbps Operating channels 802.
Parameter Specifications Requirement Operating Temperature -5ºC—45ºC Storage Temperature -20ºC—70ºC Operating Humidity 10%—95%, non-condensing Storage Humidity 5%—95%, non-condensing Power Supply 12VDC, 1.5 A Consumption 11.8W (including power Adapter) EMC and Safety Regulation Compliance NA Safety Regulations NA Green Standard RoHS Physical Characteristics Physical Dimension / Weight / FCC Statement This device complies with part 15 of the FCC Rules.
• the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.