2.
.4GHz FHHS DIGITAL Transmitter/Receiver MODEL: DA911W USA VERSION √ IMPORTANT SAFETY INSTRUCTIONS When using your equipment, basis safety precautions should always be followed to reduce the risk of life electric shock, and injury to persons, including the following. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
2.4GHz FHHS DIGITAL Transmitter/Receiver MODEL: DA911W USA VERSION technician to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinctive change in performance. 13. Avoid using a TRANSIMITTER (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 14. Do not use the TRANSIMITTER to report a gas leak in the vicinity of the leak.
2.4GHz FHHS DIGITAL Transmitter/Receiver MODEL: DA911W USA VERSION √ IMPORTANT Read this manual before attempting to setup or use this instrument. If contains important Information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action. √ WARNING To prevent fire or shock hazard, do not expose this product to rain or any type of moisture.
2.4GHz FHHS DIGITAL Transmitter/Receiver MODEL: DA911W 6. 7. 8. 9. 10. 11. " USA VERSION Do not attempt to rejuvenate the battery provided with or identified for use with this product by heating them. Sudden release of the battery electrolyte may occur, causing burns or irritation to eyes or skin. When inserting the battery into this product, the proper polarity or direction must be observed. Reverse insertion of battery may result in leakage or explosion.
2.4GHz FHHS DIGITAL Transmitter/Receiver MODEL: DA911W USA VERSION PREPARING FOR INITIAL USE 1. setting the Battery on transmitter. 2. Ensure that the Li-ion battery is installed and fully charged before initial use. 3. Check line and power connections. 4. Push the transmitter TALK button to confirm. If you do not get a LED display, please refer to the Troubleshooting chart. OPERATION 5. Supply 12 VDC power into the BASE using the provided AC adaptor. 6.
2.4GHz FHHS DIGITAL Transmitter/Receiver MODEL: DA911W USA VERSION contact during charging. ♦The charging contacts may need to be cleaned with an alcohol-moistened cloth. ♦The Ni-MH battery pack may need to be discharged first before a full charge. Range is limited ♦Raise or reposition the antenna on the docking station. Sign received flutters or ♦The transmitter rechargeable Li-ion battery pack may need charging. fades ♦You may be out of normal operating range. Move closer to the docking station.
