User's Manual

BTMXXXXRC4XX-XX and Windows XP Service Pack 2

• If you have Windows XP service pack 2 installed and have a Belkin Bluetooth adapter

installed the Microsoft driver will take control of he device and will render you unable

to use the Belkin Bluetooth software.

• You can verify if this is the problem by looking at your system tray, you will see the

following,

• As you can see the Belkin icon is red in the centre showing its unable to

communicate with the device, and the Microsoft Bluetooth icon is present (Next to the

clock) showing its that controller the adapter.

• Open the Windows device manager and expand the “Bluetooth Radios” section, you

will see the following devices listed.

• Right click on the “Belkin Bluetooth Adapter” and select “Update Driver”, the hardware

wizard will come up on the screen.

• If asked do not connect to windows update to search for software. Select the second

option “Install from a list or specific location(Advanced)” and click next,

• On the next screen select the option “Don’t search I will choose the driver to install

and click next.

PAGE 1
BTMXXXXRC4XX-XX and Windows XP Service Pack 2 • If you have Windows XP service pack 2 installed and have a Belkin Bluetooth adapter installed the Microsoft driver will take control of he device and will render you unable to use the Belkin Bluetooth software.
PAGE 2
• A list of compatible drivers will be shown, select the “Belkin Bluetooth Device” which is the Belkin driver and click next. • The hardware wizard will finish and you will be left with the following in the device manager, • You can now proceed and use the Bluetest software as normal.
PAGE 3
• Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.