Product Instructions For assistance with assembly or questions contact: Customer Service PAGE 1
Before beginning assembly, separate all parts and carefully study the parts diagrams below. Review all parts and hardware before disposing of any packaging. You may receive extra hardware with your unit. Call Customer Service for missing hardware.
1: Bolt (8) 2: Spring Washer (8) Dia. 5/16” x2”L Dia. 5/16” 3: Flat Washer (8) 4: Bolt (16) Dia. 5/16” 5: Spring Washer (16) Dia. 1/4” x1/2”L 6: Flat Washer (16) Dia. 1/4” 7: Bracket (8) Dia. 1/4” 8: Allen Wrench (1) 9: Allen Wrench (1) Dia. 5mm 10: Screw (8) Dia. 4mm Dia.
Assembly Instructions 9 Unpack and lay parts on a clean, padded surface like a carpet or blanket. Check that you have all parts indicated on the front page. 10 Attach Rail (D) to the Panel (C) with Bolt (10) as shown in Figure 1. Tighten Bolt (10) with Allen Wrench (9). C Figure 1 B Attach three Legs (B) to Top Panel (A) with Bolts (1), Spring Washers (2), and Flat Washers (3) as shown in Figure 2. Tighten Bolts (1) with Allen Wrench (8).
7 9 Attach three Legs (B) to Shelf Panel (C) with Bolts (4), Spring Washers (5), Flat Washers (6), and Brackets (7) as shown in Figure 3. 4 5 6 Tighten Bolts (4) with Allen Wrench (9). A Figure 3 Attach three Legs (B) to Bottom Panel (C) with Bolts (4), Spring Washers (5), Flat Washer (6), and Brackets (7) as shown in Figure 4. 9 Tighten Bolts (4) with Allen Wrench (9).
Attach fourth Leg (B) to Top Panel (A) with Bolt (1), Spring Washer (2), and Flat Washer (3) as shown in Figure 5. Tighten Bolts (1) with Allen Wrench (8). 3 8 Figure 5 9 5 4 C Attach fourth Leg (B) to Bottom Panel (C) with Bolt (4), Spring Washer (5), Flat Washer (6), and Bracket (7) as shown in Figure 4. Tighten Bolts (4) with Allen Wrench (9).