MA-630TU ORDERCODE D6144 Highlite International B.V.
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio MA-630TU brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
DAP Audio DAP Audio MA-630TU™ Product Guide Warning ........................................................................................................................................................................... 3 Unpacking Instructions ............................................................................................................................................. 3 Safety Instructions ...................................................................................................
Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Never use anything to cover the ground contact. Never leave any cables lying around. Do not insert objects into air vents. Do not connect this system to a dimmerpack. Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not open the device and do not modify the device. Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International L N EU (including UK) From April 2004 Brown Blue Green/Yellow North America Pin Black White Green Phase Neutral Protective Earth Make sure that the device is always connected properly to earth! Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Description of the device Features The MA-630TU is a versatile 100V amplifier due to the matrix functionality. It has 4 inputs and 6 individual outputs. With the zone selection buttons you are able to route each input and the media player to your desired output and control different audio sources for 6 areas. With the headphones output on the front you are able to monitor each zone to check which music is playing in which area. The media player has a tuner and USB/SD slot.
7. Priority button Pushing this button allows you to switch the priority function for channel 1 on or off. If the priority function is active, all channels except channel 1 will be muted when the mic 1 (11) input picks up a signal. 8. Chime button If pushed in, the device enters chime mode. In chime mode, the chime signal will be activated and all inputs except input 1 will be muted so you are able to broadcast a message after the chime signal. 9.
20. Rep (M2) button MP3 mode: Pushing this button lets you switch between Normal play, Repeat all and Random play. Tuner mode: Pushing this button will recall memory preset M1. 21. Display MP3 mode, this display shows the current track number. Tuner mode, this display indicates the receiving frequency and memory number. 22. Volume Push this button to decrease the output level of the tuner – USB/SD player. 23. button MP3 mode: Use this button for skipping tracks in backwards.
Backpanel Fig. 3 33. AC Inlet with integrated fuse holder This connector is meant for the connection of the supplied main cord. Connect one end of the power cord to the connector, the other end to the mains, then turn on the power (17) switch to operate the unit. Make sure that the supply voltage matches the operation voltage before connecting the unit to mains. Replace the fuse only with a fuse of the same specification (230V:T2,5A). 34.
43. Zone 1-6 low impedance speaker terminals Connect this terminal to the + terminal of either an 8Ω or 16Ω speakerload. In case of using several speakers, make sure that the total speaker load is the same as the impedance of the corresponding terminal. The total power rating of the low impedance speakers connected to this terminal summed, should be at least 30W. 44. Zone 1-6 100V high impedance terminals Each zone has its own output terminal.
Operating the Tuner Selecting a station Use the AM/FM (18) button to select either AM or FM band. Push the (23) or (24) button to tune stepwise. Pushing the (23) or (24) button for more than 1second will let you speed up the searching. Selecting a preset. Use the AM/FM (18) button to select either AM or FM band. Push M1 (19), M2 (20), M3 (27), M4 (30) or M5 (31) to recall preset M1-M5. Storing a station in Memory Push the memory (28) button.
or push the (30) during the pause condition to restart playback. Stop Playback There are two ways to stop playback: 1. Push the (30) button during playback to pause at that point. 2. Push the (31) button during playback. Pausing Push the (30) button to switch between play mode and pause mode. The display in the figure below shows the USB-player in pause mode. Note: In case the SD player is selected, the display will show SD instead of USB.
Switching between USB and SD playback Make sure that an USB stick as well as a SD-card are inserted. If you are in USB mode, push the USB/SD (19) button. Now the display will search for a SD- card If a SD card is found, the dispay will briefly show SD. If no SD card is found, the display will show No SD. Connecting Inputs Use the jack inputs at the front or the XLR input connectors on the rear to supply audio signals to your DAP Audio amplifier.
Example 3: using the 8Ω output with two 4Ω speakers. Fig. 7 In a low impedance system, the total speakerload should always match the amplifier impedance. This to avoid overloading the amplifier. The total speaker power should be at least the power of the amplifier to avoid damage to the speakers. High impedance outputs If using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.
Compensation of interference with balanced connections 15
Maintenance The DAP Audio MA-630TU requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specifications Output Power: Power outputs: Input 1: Input 2: Input 3: Input 4: Tuner Presets: Media player: Media player EQ: Indication LEDs: Chime: Priority: Siren: Main power supply: Fuse: Power consumption: Power connection: Dimensions: Weight: Accessories: 6 x 30W 8-16 Ohm, 70V, 100V (terminal strip) Microphone (6.
2013 Dap Audio.