MANUAL ENGLISH COM-ART V2 Ordercode: D1414 Highlite International B.V.
COM-ART Table of contents Warning ...............................................................................................................................................................................2 Unpacking Instructions .................................................................................................................................................2 Safety Instructions ..............................................................................................................
COM-ART Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
COM-ART IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system. ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Always let the device cool down before cleaning or servicing. Always disconnect power from the mains, when system is not used. Only handle the power cord by the plug. Never pull out the plug by tugging the power cord.
COM-ART ● ● ● ● ● The best way to avoid ground loops is connecting the electrical system ground to one central point ("star" system). In this case the mixer can act as a central point. This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth. The user is responsible for correct positioning and operating of this product. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
COM-ART Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
COM-ART Description of the device Features The COM-ART is a PLL UHF wireless audio set. The set consists of one transmitter and one receiver. The smart and lightweight design enables you to connect the receiver directly to any amplifier or active speaker. Both the transmitter and receiver can be powered with an AA battery or a USB power supply. The device operates properly within the range of 50 meters, in an ideal situation.
COM-ART Frontside Fig. 01 COM-AR (receiver) 3-pin XLR IN 5V Mini USB power connector IN COM-AT (transmitter) 3-pin XLR OUT 5V Mini USB power connector IN Backside Fig.
COM-ART Installation Remove all packing materials from the COM-ART. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Power Supply The COM-ART can be powered with an AA battery, or with the included USB cable connected to an USB adapter (5V, 500mA).
COM-ART Set Up and Operation Location For best operation, the COM-AT (transmitter) and the COM-AR (receiver) should be: Located above the ground, as high as possible, Positioned away from walls or metal surfaces, to minimize reflections, The receiver antenna should be kept away from noise sources such as other digital equipment, microwave ovens or other large metal objects. The device works best when the receivers are located within the line of sight of the transmitter.
COM-ART Power On/Off 01) The device will switch on automatically, upon receiving power. The display will show the currently selected frequency preset and will blink 3 times. When no button is pressed for 5 seconds, the display will turn off. 02) In order to switch the device off, press and hold down the SET button (07) for 2 seconds. 03) In order to switch the device on, again press and hold down the SET button (07) for 2 seconds.
COM-ART Connection Cables Take care of your cables by always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their lifespan and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
COM-ART Maintenance The COM-ART requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply and wipe with a damp cloth. Do not immerse in liquid. Wipe clean with a soft cloth. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
COM-ART Dimensions Ordercode: D1414 13
COM-ART Notes Ordercode: D1414 14
©2018 DAP Audio
