Installation Guide

Adjustable

Wrench

Llave ajustable

Pince à bec effilé

Clé à molette

Needle-nose Pliers

Alicates de extremos finos

Shown/Mostrado/Illustré

D460070/ D460074

1. Remove the existing showerhead from the shower arm. Clean the debris from

the inside of the shower arm and the shower arm threads. Run water to flush

the residual debris from the inside arm (Fig 1).

2. Wrap the threads of the shower arm with the plumber's tape (included) (Fig 2).

3. Attach the new showerhead to the shower arm by turning clockwise. Tighten

with a wrench (Fig 3 & 4).

Pomme de douche à effet de pluie ronde

Cabezal de ducha redondo estilo lluvia

Drench Round Rain Showerhead

PAGE 1
Drench Round Rain Showerhead Cabezal de ducha redondo estilo lluvia Pomme de douche à effet de pluie ronde Adjustable Wrench Needle-nose Pliers Llave ajustable Alicates de extremos finos Clé à molette Pince à bec effilé 1. Remove the existing showerhead from the shower arm. Clean the debris from the inside of the shower arm and the shower arm threads. Run water to flush the residual debris from the inside arm (Fig 1). 2. Wrap the threads of the shower arm with the plumber's tape (included) (Fig 2).
PAGE 2
the the 1. Remove the showerhead from the shower arm by unscrewing the ball joint counter-clockwise (Fig 1). the the 4. Remove any debris from the filter screen and from the flow controller. Reinstall the flow controller by pressing into the opening of the showerhead. Reinstall the filter screen by screwing clockwise into the ball joint threads. Reattach the showerhead by screwing the ball joint clockwise into the shower arm threads.
PAGE 3