Measurement Guide
8,000-lb. Capacity / Two-Post Li / Floorplate / Adjustable Width /
Includes Stackable Pads and Adapters
D2-8F TWO-POST LIFT
SKU 5175316
The Dannmar D2-8F has quick liing speed with a hearty amount
of features to increase usefulness and producvity. These
features provide lower operang costs and quicker repair mes.
If you’re looking to work with less hassle, check out Dannmar’s
short-style D2-8F automobile li as the perfect li for your shop.
SPEC SHEET
Rev 9-16-2020
SKU 5175316
DESCRIPTION
Model D2-8F
Style Floorplate
SKU# 5175316
Liing Capacity 8,000 lbs. (3,629 kg)
A - Lowered Height + Pad 4.25” (108 mm)
B - Max. Liing Height (Top Lock) 80.5” (2,045 mm))
C - Max. Rise 72” (1,829 mm)
D - Height Overall 113” (2,870 mm)
E - Width Overall 132” (3,353 mm) or 145” (3,683 mm)
F - Width Outside Columns 126.75” (3,219 mm) or 139.75” (3,550 mm)
G - Width Inside Columns 105” (2,667 mm) or 118” (2,997 mm)
H - Drive-Thru Clearance 93” (2,362 mm) or 106” (2,692 mm)
I - Floorplate Width 8.5” (216 mm)
J - Floorplate Height 1.25" (33 mm)
K - Arm Length 32.25" (819 mm) - 52.25” (1,327 mm)
Max. Load per Arm 2,250 lbs. (1,021 kg)
Time to Full Rise 45 seconds
Noise 45 dB
Motor (*) 220 VAC / 60 Hz / 1 Ph
* Special voltages available upon request.
SPECIFICATIONS
© 2020 BendPak Holdings LLC. A wholly owned subsidiary of BendPak, Inc.
1-877-432-6627 sales@dannmar.com www.dannmar.com
1645 Lemonwood Dr.
Santa Paula, CA 93060