DANLAW DATA LOGGER DL970 USER MANUAL Revision: V2 Revision date: January 15th, 2020
1.1 Product Overview Danlaw Data Logger – Vehicle Data Over the Air Danlaw’s Data Logger was developed to provide companies with an easy to install, wireless communication device for monitoring and logging vehicle network message data. The need for the DDL was driven by Danlaw’s own experience with Networked Automotive Electronics solution development, and perfected to provide our customers with the benefits of our experience.
1.
2.0 Installation Instructions 1. Locate the OBD connector: If you are not able to locate the OBD connector, please refer to the Vehicle User Manual 2. Install the DL970 device by plugging it into the OBD connector Warning: The device has to be installed in such a way that at all times a minimum distance of at least 20cm shall be kept between the device and the user.
3.0 Electronic Code of Federal Regulations The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
(2) this device must accept any interference received, including interference that may cause undesired operation of the device. This device has been evaluated and shown compliant with the ISED RF Exposure limits under mobile exposure conditions. The distance between the antenna and the person’s body shall be greater than 20cm at all times. This device has been certified for use in Canada.
If you have any questions regarding safety or use cased please contact Danlaw Inc. Office: 41131 Vincenti Court. Novi, MI 48375 USA.
5.
