User's Manual

ManualsBrandsDakota Alert ManualsElectronicsPB-4000 Directional Probe Alarm

PB-4000 User’s Manual

The PB-4000 is a wireless probe transmitter that will send a radio signal to your DCR-4000

receiver when it detects a vehicle in the monitored location, such as a driveway or a drive-up

window. The PB-4000 can be used to detect the direction of travel of a vehicle by using the

dual probe.

Package Contents:

Wireless Probe transmitter

Dual probe with 50' of direct burial wire

CR-123A batteries

User guide

Setting up your wireless dual probe:

1. Install the CR-123 batteries

2. Code your DCR-4000 to receive a signal from the PB-4000. The PB-4000 can distinguish

between traffic entering and exiting.

3. Locate and mount the transmitter near the driveway.

Installing the batteries:

1. Open the lid to the transmitter box.

2. Install three (3) CR-123A batteries (included). Make sure to position the batteries so the

+ and - of the batteries match the outline in the battery compartment.

3. Close the lid and secure the latch.

Coding the receiver:

1. Place the receiver and transmitter near each other.

2. On the receiver, press and hold the "MODE" and "Volume" buttons for three seconds

until the LEDs flash, then release the buttons.

3. Press the "Volume" button repeatedly until you hear the tune you desire.

a. Ding Dong #1

b. Ding Dong #2

c. Westminster Chime

d. Fur Elise

e. Siren

f. Coo Coo Clock

g. Bird Chirping

h. Twinkle Twinkle

Summary of content (4 pages)

PAGE 1
PB-4000 User’s Manual The PB-4000 is a wireless probe transmitter that will send a radio signal to your DCR-4000 receiver when it detects a vehicle in the monitored location, such as a driveway or a drive-up window. The PB-4000 can be used to detect the direction of travel of a vehicle by using the dual probe. Package Contents: Wireless Probe transmitter Dual probe with 50' of direct burial wire CR-123A batteries User guide Setting up your wireless dual probe: 1. Install the CR-123 batteries 2.
PAGE 2
4. 5. 6. 7. 8. i. William Tell j. Canon in D k. Morning l. Toreodor March After you select the tune, activate the transmitter by pressing the "A" or "B" button on the transmitter. a. The "A" button is used to signal when a vehicle is entering- passing Probe A and then Probe B. b. The "B" button is used to signal when a vehicle is leaving- passing probe B then Probe A. If you choose to program different sounds for vehicles entering and exiting repeat steps 3 and 4 above.
PAGE 3
Tech Support: If you are having any problems using this product after reading the manual, please contact Dakota Alert. You can reach us by phone at 605-356-2772 from 8:30AM to 5:00PM Monday through Friday (Central time). We will be happy to answer your questions and help in any way we can. Warranty: Dakota Alert warrants this product to be free from defects in materials and workmanship for a period of one year from the date of purchase.
PAGE 4
-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 8 inches (20cm) between the radiator and your body.