User`s manual

Daikin Australia
Pty Limited (ISO 9001)
QEC 23256 31 May 2006
Daikin Australia
Pty Limited (ISO 14001)
CEM20437 13 November 2006
All rights reserved
Printed in Japan 08/07/004 Y.K.
c
Dealer
Head Office:
Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,
Kita-ku, Osaka, 530-8323 Japan
Tokyo Office:
JR Shinagawa East Bldg., 2-18-1, Konan,
Minato-ku, Tokyo, 108-0075 Japan
http://www.daikin.com/global_ac/
1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.
2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install
the outdoor unit close to the sea shore, contact your local distributor.
Cautions on product corrosion
Warning
Daikin Industries, Ltd.’s products are manufactured for export to numerous countries throughout the
world. Daikin Industries, Ltd. does not have control over which products are exported to and used in a
particular country. Prior to purchase, please therefore confirm with your local authorised importer,
distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for
use, in the region where the product will be used. This statement does not purport to exclude, restrict
or modify the application of any local legislation.
Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.
Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or
contractor to install those parts and accessories. Use of unauthorised parts and accessories or
improper installation of parts and accessories can result in water or refrigerant leakage, electrical
shock, fire or explosion.
Read the User's Manual carefully before using this product. The User's Manual provides important
safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
Specifications, designs and other content appearing in this brochure are current as of August 2007 but subject to change without notice.
ISO 14001 is the standard defined by the
International Organization for
Standardization (ISO) relating to
environmental management systems. Our
group has been acknowledged by an
internationally accredited compliance
organisation as having an appropriate
programme of environmental protection
procedures and activities to meet the
About ISO 14001
ISO 9001 is a plant certification
system defined by the International
Organization for Standardization (ISO)
relating to quality assurance. ISO
9001 certification covers quality
assurance aspects related to the
design, development, manufacture,
installation, and supplementary
service of products manufactured at
About ISO 9001
JMI-0107 JQA-1452
A s pecial air c onditioning s ys tem des igned
for s mall-s ized buildings
PCVAU0737A
HE AT P UM P
Heat P ump 50 Hz

Summary of content (20 pages)