INSTALLATION MANUAL Remote controller BRC1D517
1 3 S M 1 PCB 1 S M 2 1 1 4 2 3 2 7 5 a 1 d UNIT No.
BRC1D517 Remote controller READ THIS MANUAL ATTENTIVELY BEFORE STARTING UP THE UNIT. DO NOT THROW IT AWAY. KEEP IT IN YOUR FILES FOR FUTURE REFERENCE. IMPROPER INSTALLATION OR ATTACHMENT OF EQUIPMENT OR ACCESSORIES COULD RESULT IN ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY TO USE ACCESSORIES MADE BY DAIKIN WHICH ARE SPECIFICALLY DESIGNED FOR THE USE WITH THE EQUIPMENT AND HAVE THEM INSTALLED BY A PROFESSIONAL.
3. Wire the indoor unit (Refer to figure 6) 1 indoor unit 2 lower part of the remote controller 3 upper part of the remote controller 4 wired from the rear 5 wired from the top 6 notch the part for the wiring to pass through with nippers, etc. Connect the terminals on top of the upper part of the remote controller (P1, P2), and the terminals of the indoor unit (P1, P2). (P1 and P2 do not have polarity.
. Permission level function 6. Field settings ■ If optional accessories are mounted on the indoor unit, the indoor unit setting may have to be changed. Refer to the instruction manual for each optional accessory. If required, you can limit the user action by restricting the number of operable buttons. Refer to the chapter "Field settings".
Example Notes If during group setting and the time to clean the air filter is set to FILTER CONTAMINATION - HEAVY, SET MODE NO. to “10”, FIRST CODE NO. to “0”, and SECOND CODE NO. to “02”. NOTE 1. Setting is carried out in the group mode, however, if the mode number inside the parentheses is selected, indoor units can also be set individually. 2. The SECOND CODE number is set to “01” when shipped from the factory. 3. Do not make any settings not given in the table. 4.
Description of setting Filter Contamination - Heavy/Light (Setting for spacing time of display time to clean air filter) (Setting for when filter contamination is heavy, and spacing time of display time to clean air filter is to be halved) 10(20) 11(21) 15(25) 02 Approx. 10.000 hrs. Approx. 5.000 hrs. Long life filter Approx. 2.500 hrs. Approx. 1.250 hrs. Standard filter 1 Long-life filter type (setting of filter sign indication time).
Mode FIRST No. CODE Note 1 NO. 1b SECOND CODE NO.
NOTES
Zandvoordestraat 300, B-8400 Oostende, Belgium 4PWEN15195-1