User's Manual

Step 1. Download the Kaon Wi-Fi App
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
Launch the Wi-Fi app. Select Set up manually
Go to Wi-Fi settings to connect to your network (AR1344P Wi-Fi Network)
Tap Find my device, enter your login information printed on a label on the bottom of the AR1344P
and tap Login. You can see the dash board of the app after you successfully set up your Wi-Fi
network.
Add AR1344P to an existing Wi-Fi network, tap icon on the top right hand corner of the dashboard.
Tap to add new AR1344P and scan QR code printed on a label on the bottom of the AR1344P,
then tap Create Mesh.
Customize the network name and password.
Tap icon on the top right hand corner of the dashboard, and select the Wi-Fi settings to create your
own network name (SSID) and password.
Note: If your device disconnects from the Wi-Fi network, view the available Wi-Fi network and then
choose the new network name (SSID) and enter the new password.
Scan the unique QR code below, or go to Google Play or the Apple App Store to download the Kaon WiFi app.
Install the app on a compatible iPhone or Android smartphone.
Follow the step-by-step instructions on the App to connect your home gateway to the AR1344P unit.
Size: 105 x148mm
Black 1c printing
AR1344P Wi-Fi ExtenderAR1344P Wi-Fi Extender AR1344P Wi-Fi Extender
2. Quick Mesh Setup : Option #1 → WPS
To set up AR1344P Master and Slaves:
AR1344P Master
AR1344P lave
Lagacy GW
Wireless Characteristics
- 4x4 5GHz 802.11ax
- 2x2 2.4GHz 802.11ax
- 4 Spatial Streams
- Wave 2 (MU-MIMO)
- Beamforming
- High-power transmit for maximum coverage
- 2 -
LED (Power, WAN, LAN, 2.4G, 5G, WPS)
LAN2
LAN1/WAN
1
1
1
2
2
3
WPS Button
Factory Reset Button (press 5~6 seconds)
Power Connector
Power On/Off Switch
4
4
5
5
6
7
7
LED Scenario
The light on the front side of your AR1344P gives you information about the AR1344P’s operation.
3. Quick Mesh Setup: Option #2 → Mobile App
Step 1. Access the web-based setup page
a.
b.
c.
d.
e.
Connect your PC to the working AR1344P (master mode)’s wireless network (SSID).
WebUI address, ID and the password are located at the label at the bottom of your device.
Launch a web browser (Internet Explorer or Chrome).
Enter http://192.168.1.1 or http://kaonmesh_[][][][] ([][][][] is the last 4 digits of the working AR1344P’s serial
number) in the address bar, then press.
Enter the default user name, “admin” and “password”, password in the fields.
Note : You can view and change your Wi-Fi name (SSID) and password, and see all your AR1344P configured
as a mesh network (master and slave mode) in your Wi-Fi.
4. Accessing your AR1344P from WebUI
- 3 -
AR1344P
Quick Installation Guide
Technical Specifications
Physical Specifications
1. AR1344P overview
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
Step 7.
Step 8.
Connect your legacy GW to the LAN1/WAN port on your AR1344P using the included
Ethernet cable.
Connect your AR1344P(Master) to a power source.
Note: If the Power LED on the front of AR1344P does not light, press the Power On/Off switch.
Wait for the AR1344P master’s Power LED to light solid green and the 2.4G and 5G LED
lights solid green.
Place the AR1344P slave about 3 meters from the AR1344P master. Connect the AR1344P
slave to a power source.
Wait for the AR1344P slave's power LED to light solid green and the 2.4G and 5G LED
lights solid green.
Press the WPS button on AR1344P master for 3 seconds.(Do not press the WPS button
on AR1344P Slaves)
Wait for about 3-4 minutes until mesh pairing is complete and the AR1344P slave's WPS LED
turns solid green.
Place your mesh extender(s) in the desired location(s) in the household and ensure that
the Signal LED stays solid green.
Note: You’ll get the best signal when it is in an open space like on a shelf or a table.
- 1 -
3
6
5GHz Wireless Operating Channels
- 5.15-5.35 GHz, 5.470-5.725 GHz-5.850 GHz
- 20, 40, 80 and 160 MHz bandwidths supported
Wireless Security
- WPA2 / WPA
- Push-button :
Wireless setup (Mesh / WPS) and Reset support
Memory
- 256MB Flash and 512MB SDRAM
Antenna
- Four (4) high performance internal antennas
Ports
- Two (2) RJ45 Gigabit Ethernet
(10/100/1000Mbps) WAN/LAN port
s
LEDs
- Five (5) LEDs
: Power, WAN, LAN, 2.4G, 5G, WPS
Management
- TR-069 management client
- Local web access
- Mobile application support (optional)
Operating Environment
- Operating temperature 0º to + 40ºC
- Relative humidity 8% to 95%;
Non-condensing
- Dimensions : 130 x 130 x 54 mm (W x H x D)
Accessories
- One (1) 12V/1.5A power adapter
- One (1) Ethernet cable
- Quick start guide
Regulatory Certification
- Wi-Fi Alliance®
- CE
- RoHS
- WEEE
KAON BROADBAND Co., Ltd. KAONMEDIA Building, 884-3, Seongnam-daero, Bundang-gu, Seongnam-si, Gyeonggi-do, 13517, South Korea
© 2020 KAON BROADBAND Co., Ltd. KAON BROADBAND and the KAON BROADBAND Logo are trademarks of KAON BROADBAND Co., Ltd. Other
brands are trademarks or registered trademarks of their respective holders.
This document is for informational purposes only. Information and views expressed in this document may change without notice. For technical
support and other information, please contact your sales representative or contact us by email.
www.kaonbroadband.pl * [e-mail] * [e-mail]
<FCC User manual Statements>
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party
responsible for compliance
could void the user's authority to operate this equipment.
RF Exposure Statement (MPE)
The antenna(s) must be installed such that a minimum separation distance of
at least 20 cm is maintained between the radiator (antenna) and all persons
at all times. This device must not be co-located or operating in conjunction
with any other antenna or transmitter.
7
4
6
532
LED COLOR Blinking Solid Off
PWR
Green
Power is not supplied
to the router
WAN
Green
The LAN1/WAN port is
sending
or receiving data
A power - on device
AP router is ready
is connected to
the LAN1/WAN port
No device is connected
to this LAN1/WAN port
LAN
Green
The LAN2 port is sending
or receiving data
A power -on device
is connected to
the LAN2 port
No device is connected
to this LAN2 port
2G
Green
The route is sending
or receiving Wi-Fi traffic
The 2.4GHz radio
is operating
The 2.4GHz radio is off
5G
Green
The route is sending
or receiving Wi-Fi traffic
The 5GHz radio
is operating
The 5GHz radio is off
WPS
Blue
Smart connecting
or mesh grouping
Master mode O
O
O
O
O
O
Mesh
Network Service
Mesh X
Network Service X
Green
Smart connecting
or mesh grouping
Slave mode
Mesh
Network Service
Mesh X
Network Service X