DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` A mac001 1200DPI 90LPI HELP LINE ; 0870 100 2525 With queries, please quote the page number, reference number and model number. DVD Recorder DR-2100P Instruction Manual Downloaded From Disc-Player.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` i mac001 1200DPI 90LPI Safety Instructions INTRODUCTION Please keep the DVD Recorder’s guarantee sheet and receipt in a safe place. Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your DVD Recorder. • Read this page and chapter ‘Setting up your DVD Recorder’ to help you set up and adjust your product correctly. • Do not put the DVD Recorder in a hot or humid place.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` ii mac001 1200DPI 90LPI Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` iii mac001 1200DPI 90LPI Important Safeguards 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2 RETAIN INSTRUCTIONS 10 POWER SOURCES The safety and operating instructions should be retained for future reference. 3 HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` iv mac001 1200DPI 90LPI Important Safeguards personal injury and serious damage to the product. 17 DISC Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 18 SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
DW-Q73D2P-SA(GB) 2005.8.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 2 mac001 1200DPI 90LPI Overview DVD, DVD+R, DVD+RW? What is a DVD? DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 3 mac001 1200DPI 90LPI Overview INTRODUCTION Regional code 2 ALL If the region number on your DVD disc does not correspond to the region number of this player, the disc cannot be played.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 4 mac001 1200DPI 90LPI Overview About DVD Recording Notes on Recording • The recording times shown are not exact because the DVD Recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 5 mac001 1200DPI 90LPI Overview To clean the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. To obtain a clear picture The DVD Recorder is a high-tech, precision device.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 6 mac001 1200DPI 90LPI Identification of Controls Front Panel % ^& * ( ) ! @ # $ 1 ! POWER (STANDBY/ON) Turns the DVD Recorder on and off. @ Disc Tray (DVD deck) Insert a disc here. # Front Panel Display Shows the current status of the DVD Recorder. $ PR+/– Scans up or down through memorized channels. Also moves up and down in DVD navigation menus. % OPEN/CLOSE Opens or closes the disc tray. ^ REC Starts recording.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 7 mac001 1200DPI 90LPI Identification of Controls INTRODUCTION Front Panel Display Channel TV Channel CC23 CATV Channel AV-1 AV1 input AV-2 AV2 input DV DV input F-AV Front AV input PR10 Input mode Recording on disc 11:15 Indicates a DVD Timer recording is set. 11:15 Indicates a DVD Timer Recording is in standby mode. 11:15 Indicates the DVD is recording.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 8 mac001 1200DPI 90LPI Identification of Controls Remote Control Turns the DVD Recorder on and off. Lock/Unlock the front panel by pressing and holding it over 5 seconds. Opens and closes the disc tray in DVD mode. Mutes the sound. Press and hold for 3 seconds to switch between Progressive Scan and Interlace Scan mode. Switches the DVD Recorder input to Tuner, AV1, AV2, AVF or DV. - Selects numbered options in menus. - Selects TV channels.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 9 mac001 1200DPI 90LPI Identification of Controls INTRODUCTION Skips to the next or previous chapter/track. Displays the edit menu for DVD+RW/+R discs or sets a chapter marker. Enlarges the DVD video image. Increases or decreases the slow motion speed when playing a DVD. Displays the finalize menu for DVD±R, DVD-RW discs. Displays the digest menu for DVD+RW/+R discs. Displays a disc’s Title menu, if available. Selects a DVD camera angle, if available.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 10 mac001 1200DPI 90LPI Identification of Controls Rear panel ! @ # $ % ^ & ! RF OUT (TO TV) Connect to a TV with an RF coaxial input. @ RF IN (FROM ANT.) Connect to your antenna or cable TV outlet. # Scart socket 2 Connection of an additional device (satellite receiver, set-top box, video recorder, camcorder, etc.) $ Scart socket 1 Connection of a TV set. Composite-output and RGB-output.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 11 mac001 1200DPI 90LPI Connections INTRODUCTION • There are a variety of ways to connect the DVD Recorder to your TV and other equipment. Use only one of the connections described below. Whichever TV connection you use will work with all input sources. • Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best connections.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 12 mac001 1200DPI 90LPI Connections Connecting a TV Choose one of the following TV connections, depending on the capabilities of your equipment. RF Connection Connect the RF OUT (TO TV) jack on the DVD Recorder to the antenna in jack on your TV using the supplied 75-ohm RF cable (R). Rear of TV ANTENNA INPUT S-VIDEO INPUT COMPONENT/PROGRESSIVE VIDEO INPUT Pr Pb Y This set doesn’t apply the modulator output. However, still apply the RF through Output.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 13 mac001 1200DPI 90LPI Connections Connecting an Amplifier/Receiver Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A). 1 Connect the DVD Recorder’s DIGITAL AUDIO OUT jack (COAXIAL X) to the corresponding in jack on your amplifier.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 14 mac001 1200DPI 90LPI Connections Connecting Optional Equipment To receive audio/video signals from other equipment, connect the LINE1 or LINE2 jacks on the DVD Recorder to the audio/video out jacks on your external component, using optional audio/video cables. Jack Panel of Accessory Component (VCR, Camcorder, etc.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 15 mac001 1200DPI 90LPI Initial Installation Initial Installation After successfully connecting your DVD Recorder to your TV and other devices, this chapter will show you how to complete the initial installation. You must follow the initial installation process to set the time, date, channels, and language preferences for the DVD Recorder. ‘Initial Setup Wizard‘ is displayed on the screen. Make sure the RF cable from your antenna or cable TV jack is connected.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 16 mac001 1200DPI 90LPI Initial Installation 7 'Complete' message is displayed on the screen. 'Initial Installation' process is finished. Complete 7/7 Setup has been completed Enjoy using your recorder Back Finish ENTER OK Re-Installation This set is equipped with the multi-tuner for receiving many countries' broadcasting. In order to receive broadcasting of different countries, follow as below.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 17 mac001 1200DPI 90LPI Initial Setup Setup Menu Overview The DVD Recorder Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Edit and Timer Recording. Press [SETUP], [œ/√] and [ENTER] on the remote control to view the first and second levels of the Setup menu. 1. Initial Setup Screen 2. Disc Operation Screen go to page 17~28. go to page 46~48.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 18 mac001 1200DPI 90LPI Initial Setup 6 Select ‘Reception‘ using [œ/√]. Use […/†] to select the desired broadcast system (Aerial or Cable), then press [ENTER]. Aerial: If you are using a standard antenna to receive channels. Manual Setup Standard Reception PAL BG Cable Auto Search Fine Tune … -- † Decoder Off PR No. -- 0 Store Channel NAME P-04 Store Channel Cancel Cable: If you are using basic cable to receive channels.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 19 mac001 1200DPI 90LPI Initial Setup Auto Scan The DVD Recorder has a frequency synthesized tuner capable of receiving up to 119 channels. These include VHF channels 2-20, 74-80, UHF channels 21-69 and CATV channels 1-41. Preparation: Installation Manual Setting •Auto Scan Clock Setting Adjust channels Connect the DVD Recorder to the desired type of antenna or cable TV system, as shown in ‘Connecting Antenna/Cable‘ on page 11.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 20 mac001 1200DPI 90LPI Initial Setup Adjust Channels 1 Follow steps 1-2 as shown under ‘Manual Setting’. 2 Use […/†] to select ‘Adjust Channels‘. 3 Press [ENTER]. The ‘CH List’ menu appears. 4 Use […/†] to select the PR number you want to adjust. Then press Installation Manual Setting Auto Scan Clock Setting •Adjust channels … œ√† Choose ENTER OK SETUP Exit [ENTER]. CH List NO.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 21 mac001 1200DPI 90LPI Initial Setup ‘Recording Options’ Settings Mode You can set the default DVD recording quality to: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) or SEP (Very Low Quality - 8 hrs/disc). 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 22 mac001 1200DPI 90LPI Initial Setup ‘Menu Language’ Settings OSD Language Select a language for the DVD Recorder Setup menu and on-screen displays. 1 Menu Language •OSD Lang Disc Menu Subtitle Audio Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 4 5 6 Use [œ] and [√] to select ‘Menu Language ‘.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 23 mac001 1200DPI 90LPI Initial Setup ‘Preferences’ / Video Settings 1 Press [SETUP]. The Setup menu appears. Preferences While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 4 Use [œ/√] to select ‘Preferences While ‘Preferences •Video Audio Parental Ctrl Auto Settings TV Aspect Video Output PS Interlace ‘. ‘ is selected, press [†] to select ‘Video‘. … œ√† Choose ENTER OK SETUP Exit Press [√].
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 24 mac001 1200DPI 90LPI Initial Setup ‘Preferences’ / Audio Settings 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 4 Use [œ/√] to select ‘Preferences While ‘Preferences Preferences Video •Audio Parental Ctrl Auto Settings SPDIF Output Dynamic Range RAW ‘. ‘ is selected, press [†] to select ‘Audio‘. … œ√† Choose ENTER OK SETUP Exit Press [√].
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 25 mac001 1200DPI 90LPI Initial Setup ‘Preferences’ / Parental Controls Set Parental Level The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. You can set the parental level from ‘ADULT’ to ‘KID SAFE’. 1 Press [SETUP]. The Setup menu appears. Preferences While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 26 mac001 1200DPI 90LPI Initial Setup Change Password 1 While ‘Preferences ‘ is selected, press [†] to select ‘Parental Ctrl‘. 2 Preferences Press [√] to select ‘Password‘. Then press [ENTER]. Video Audio Parental Ctrl Auto Settings … œ√† Choose 3 The ‘Input Password’ submenu appears. Enter your current 4-digit password then press [ENTER]. 4 Enter a new 4-digit password, then press [ENTER]. Re-enter the new password to confirm, press [ENTER].
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 27 mac001 1200DPI 90LPI Initial Setup Various ‘Preferences’ Settings 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 Use [œ/√] to select ‘Preferences 4 Press [√]. The ‘Auto Settings‘ submenu is displayed. While ‘Preferences Settings‘. ‘.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 28 mac001 1200DPI 90LPI Initial Setup System Information System Information helps service personnel identify key firmware information about your DVD Recorder in case service is required. System Info Version WP3000000FQ-050813 Loader Version AA003 A100 Micom Software 1.0.6 DivX (R) VIdeo On Demand Your registration code is : - - - - - - - to learn more visit www.divx.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 29 mac001 1200DPI 90LPI On-Screen Display Overview The On-Screen Display provides feedback on the status of the DVD Recorder and/or the currently loaded disc. To access the On-Screen Display (or OSD), press the [DISPLAY] button. Displaying DVD Information During disc playback, press [DISPLAY] to show information about the current disc. √√ 1 2 3 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 30 mac001 1200DPI 90LPI On-Screen Display Overview • Displaying icons on CDDA disc Track : Shows the current track number and total number of tracks, and skips to the desired 01/16 0:00:41 track number. Time Elapsed : Shows the elapsed playing time, and skips to the desired time.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 31 mac001 1200DPI 90LPI On-Screen Display Overview Displaying TV Information While watching TV, press [DISPLAY] to display/remove the on-screen display. If no rewritable DVD disc is inserted, you would see a screen like the following: If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the first button press. If you press [DISPLAY] again then the TV information is displayed.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 32 mac001 1200DPI 90LPI DVD Playback Playing a DVD/VCD 1 Press [EJECT] to open the disc tray. 2 Load your disc in the tray with the playback side down (label side up). 3 Press [EJECT] to close the tray. 4 READING appears on the front panel display, and playback starts automatically. If playback does not start, press [PLAY (√)]. In some cases, the Disc menu might appear instead.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 33 mac001 1200DPI 90LPI DVD Playback Still Picture and Frame-by-Frame Playback 1 Press [PLAY/PAUSE] during playback. The DVD Recorder will go into Pause mode. 2 You can back up or advance the picture frame-by-frame by pressing [FF (√√)] repeatedly during Pause mode. Fast Forward/Backward 1 Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder will go into Search mode.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 34 mac001 1200DPI 90LPI DVD Playback Repeat 1 To repeat the currently playing chapter, press [REPEAT]. REPEAT CHAPTER appears on the TV screen. 2 To repeat the currently playing title, press [REPEAT] a second time. REPEAT TITLE appears on the TV screen. 3 4 To repeat the whole disc, press [REPEAT] a third time. REPEAT DISC appears on the TV screen. You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 35 mac001 1200DPI 90LPI DVD Playback Disc Menus Many DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press [MENU]. Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight your desired selection and press [ENTER]. 1 2 Press [MENU]. The Disc menu is displayed. To exit the Disc menu, press [STOP]. Title Menus 1 Press [TITLE].
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 36 mac001 1200DPI 90LPI Other Disc Playback DivX PLAYBACK The DVD Recorder can play DivX files on CD-R/RW. 1 Insert the DivX disc and close the tray. The DivX Menu appears on the TV screen after a few moments to load the disc. 2 3 Use […†] to select a file, then press [ENTER]. Press [FF] or [REW] during playback. The DVD Recorder will go into Search mode.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 37 mac001 1200DPI 90LPI Other Disc Playback Audio CD/MP3 PLAYBACK The DVD Recorder can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs. 1 Insert the CD disc and close the tray. The Audio CD or MP3 CD menu appears on the TV screen after a few moments to load the disc. 2 Use […†] to select a track or a file, then press [PLAY] or [ENTER]. ••• MP3 ••• During playback, the current track's elapsed playing time will appear on the menu.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 38 mac001 1200DPI 90LPI Other Disc Playback 5 6 7 Press [NEXT] or [PREV] to manually skip to the next or previous image. Press [√] (or [œ]) to rotate the image (counter) clockwise. Press [STOP] to exit the slideshow. • When a CD contains both MP3 files and JPEG files, the default Play mode is JPEG image files. • The DVD Recorder can playback up to 1000 files per disc. • MP3 files encoded below 64kbps are not supported.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 39 mac001 1200DPI 90LPI Basic Recording Recording from TV Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder and load a recordable disc. Make sure your TV input is set to view the DVD Recorder. 2 Set the desired Recording mode by pressing [REC MODE] repeatedly. HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SEP (Super Long Play - 8 hrs/disc).
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 40 mac001 1200DPI 90LPI Basic Recording One Touch Record (OTR) One Touch Recording allows you add recording time in fixed increments at the touch of a button. 1 Follow steps 1-4 under Recording from TV. 2 Press [REC (●)] repeatedly to set the length of the recording. Recording starts after the first press. Each subsequent press increases the recording time by 30 minutes within the available space. The recording time is displayed on the front panel display.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 41 mac001 1200DPI 90LPI Timer Recording Timer Recording using Manual Set Record Screen The Timer Recording function allows you to record up to 8 programs within a period of one month. 1 Insert recordable media such as DVD±R ,DVD±RW. 2 Press [TIMER]. or Press [SETUP] and select ‘Timer REC’. Then press [ENTER]. DVD Recorder Init Setup ➞ The ‘Timer Recording’ menu appears.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 42 mac001 1200DPI 90LPI Timer Recording • The Timer indicator lights on the front panel display when the DVD Recorder is ready for the Timer Recording. • The disc timer indicator is blinking if disc timer recordings are overlapped. • The DVD Recorder will record the audio according to the current TV tuner setting (Stereo, Mono or BIL). Use the [AUDIO] button to set the audio before switching the DVD Recorder to Standby mode.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 43 mac001 1200DPI 90LPI Timer Recording Canceling a Timer Recording You can clear a Timer Recording any time before the recording actually starts. • Use […†] to select the program you want to erase on the Timer Recorder List. Press [■STOP] to delete the program. Stopping a Timer Recording in Progress After a Timer Recording has started, you can still cancel the program by pressing and holding [■STOP] for 3 seconds.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 44 mac001 1200DPI 90LPI Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder’s external inputs. 1 Make sure the component you want to record from is connected properly to the DVD Recorder; see pages 11 and 14. 2 Use [PR+/–] or [INPUT] to select the external input to record from.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 45 mac001 1200DPI 90LPI Recording from an External Input Recording from a Digital Camcoder You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD Recorder. You can use the DVD Recorder remote to control both the camcorder and the DVD Recorder. Before recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14. The source signal must be DVC SD format.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 46 mac001 1200DPI 90LPI Disc Operation Disc Initialize • If you load a blank DVD±R (±RW) disc, it will be initialized (formatted to enable recording). • Do not start recording until disc initialization is complete. • If you load a DVD±RW that has already been used you can record a program immediately. Disc Operation in DVD±RW disc For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 47 mac001 1200DPI 90LPI Disc Operation Make Compatible (DVD±RW) 'Make Compatible' for a DVD±RW will automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing [MENU] or [TITLE]. 3 4 5 Press […/†] to select ‘Make Compatible‘. If you want to make the disc compatible, press [ENTER]. Erase Finalize Protect Make Comp Adapt Disc Info _ Disc Operation Select OK Exit …† ENTER DISC Exit To confirm, select ‘OK‘.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 48 mac001 1200DPI 90LPI Disc Operation Disc Operation in DVD±R, DVD-RW disc For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu. The DVD±R, DVD-RW Disc Menu allows you to rename your disc or finalize it so it will be compatible with most other DVD players. At first, go to Disc Operation mode. 1 2 Press [SETUP]. The Setup menu appears.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 49 mac001 1200DPI 90LPI Disc Edit Title Menu You can manage the titles on your DVD±R/±RW discs using the Title menu. At first, go to Disc Edit mode. 1 2 Press [SETUP]. The Setup menu appears. DVD Recorder Init Setup ➞ Disc Edit œ √ Select Init Setup Disc Oper Disc Edit Timer REC While ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Edit page.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 50 mac001 1200DPI 90LPI Disc Edit Divide (DVD±RW) This feature allows you to divide a title into two titles. 2 3 4 5 Select the title to be divided using [ENTER]. 6 7 Press [ENTER] when the preferred picture is on your TV screen. Edit TITLE CH 10 TITLE CH 10 10:20 am 12/21/04 10:34 am 12/21/04 SEP HQ Select ‘Divide’ using [… †] . Press [ENTER] to divide the title.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 51 mac001 1200DPI 90LPI Disc Edit Edit Chapters 2 Select the title to be edited using [ENTER]. 3 Select ‘Chap Edit’ using [… †] . 4 Press [ENTER] to edit the chapters. 5 Select 'Yes' and press [ENTER] to confirm. Edit TITLE CH 10 TITLE CH 10 ENTER The Chapter Edit Menu will be displayed. Use [œ √…†] to select one of the various chapter marker functions (Add, Delete, or Hide). 7 Press [ENTER] to confirm.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 52 mac001 1200DPI 90LPI Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Symptom Cause Solution No power. The power cord is disconnected. No picture. The TV is not set to receive DVD Recorder signal output. Plug the power cord into the wall outlet securely. Select the appropriate video input on the TV so the picture from the DVD Recorder appears on the TV screen.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 53 mac001 1200DPI 90LPI Troubleshooting Symptom Cause The disc was not finalized (or not made compatible if using a DVD+RW). Some players will not play even a finalized disc. Discs recorded with copy-once material cannot be played on other players. The remaining blank space on the Cannot record or did not disc is insufficient. record successfully. The source you are trying to record is copy-protected.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 54 mac001 1200DPI 90LPI Troubleshooting Moisture Condensation Moisture condensation can occur: In locations where moisture condensation may occur: When the DVD Recorder is moved from a cold place to a warm place. Keep the DVD Recorder plugged into an AC power outlet with the power on. This will help prevent condensation. Under extremely humid conditions. When condensation has occurred, wait a few hours for the DVD Recorder to dry before using it.
DW-Q73D2P-SA(GB) 2005.8.26 10:53 AM ˘ ` 55 mac001 1200DPI 90LPI Technical Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Signal system AC 100~240V, 50/60 Hz Maximum 23W (Stand-by : 4W) 420*50*319 mm (w*h*d) Net : 3.27kg, Gross : 4.
Downloaded From Disc-Player.com Daewoo Manuals The information provided will be held on computer by the DAEWOO Registration Department of Domestic & General Insurance Co. Limited for the provision of warranty insurance or product related purposes. The information will not be disclosed to third parties, should you prefer not to receive product related details writes to Domestic & General Insurance Co. DAE REG / 295 Limited, on the address overleaf.
DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit. The guarantee is subject to the following provisions. The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items such as batteries, drive belts or bulbs.