GB INSTRUCTION MANUAL 14H1T, 14H2T, 14H2TEG 14H2TBL, 20H1T, 20H2T GB14H1T, GB14H2T, GB14H2TEG GB14H2TBL, GB20H1T, GB20H2T CUSTOMER SERVICES HELPLINE 01189 252 577 100
W O R T H k n o w i n g Please keep the televideo machine’s guarantee card and receipt safe for warranty purposes. Precautions ◆ Read carefully through this manual to familiarise yourself with this high quality televideo. ◆ Make sure the rating of your household electricity supply matches that shown on the back of the televideo. ◆ Refer to this chapter and the “Initial installation” chapter to help you install and adjust your televideo.
W O R T H Before doing anything with the televideo, please read the chapter “initial installation”.
CONTROLS ◆ The remote control is the principle means of control, but the main playback and record functions are also available on the front of televideo. The remote control unit To switch televideo on and off (stand by) Sound on/off Digit key 0/ATK : Auto tracking. Máx. 7 m 30˚ | 30˚ To delete input data or programme. Button for the sleep timer.(press repeatedly) To select or external input source.(EG:-SATELLITE, DVD,CAMCORDER)Also for selecting the source for recording.
C o n t r o l s The front panel’s button Remote sensor PLAY REW/REV Indicator ST-BY : Stand by led(Red) REC/T.REC : Record/Timer.Record(Red) Power on/off FF/CUE VOL/ PR.
I N I T I A L installation Please place your televideo ◆ Horizontally on a flat, steady base so that air can circulate around it for ventilation. ◆ Away from humidity and heat, magnetic fields, such as those from loudspeakers etc. and with no heavy objects placed on top. Connecting up the televideo Switch off all components when connecting or disconnecting cables. ◆ Plug the aerial cable into “AERIAL” socket of the televideo.
◆ Press the main power switch on the front panel to turn on the set then the button. Language, Country selection menus will be displayed. I n i t i a l INSTALLATION Setting time and date Clock Clock set Date Time Auto Pr Web 03/01/2001 --:-No 01 VW : Select CB : Access MENU : Previous Call up the televideo menu. And move the cursor down to the “Clock” line. Access by pressing the CB button. CLEAR: Delete Set the numbers for the exact time and the correct date. Date : dd/mm/yy Time : hour/min.
I N I T I A L installation ◆ If you want to use AV(Audio Video input) from a DVD or VCR instead of RF(Aerial input). Press the button . Automatic tuning system Select the Install menu at the menu. Place the cursor to “Auto setup” with the VW buttons. Install Auto setup Manual tuning Fine tuning Edit VW : Select CB : Access MENU : Previous Press the CB button. Country selection menu will be displayed. Please select country, then access. The cursor will move from left to right on the VHF,UHF Band.
I n i t i a l INSTALLATION Edit The Edit menu shows you the programme position assignment. You can change this programme position assignment according to your personal preferences. Pr 01 02 03 04 05 06 Edit Name Ch ----- C52 ----- C52 ----- C52 ----- C52 ----- C52 ----- C52 VW : Select CB : Access MENU : Previous Moving the channels Position the cursor to Pr. No. to move and press the SLEEP button. Select Pr. No. the colour will be changed. Position the cursor to Pr. No.
P L A Y I N G c a s s e t t e s ◆ Your televideo is switched on by the main power switch on the front panel and by the button. Playing back Load the cassette by pushing it smoothly and squarely into the cassette bay, with its windows pointing up.
P ◆ Your televideo is switched on by the main power switch on the front panel and by the button. l a y i n g CASSETTES Variable picture search Starting from playback you can control the search speed in 2 steps either forwards (F) or backwards (G). Press repeatedly. Play ( B) button switches back to normal playback. F CUE SP 00:12:34 G REV SP 00:12:34 Auto repeat Move the cursor down to the “Auto repeat” line. Change to “Yes” by cursorCB.
RECORDING c a s s e t t e s ◆ Your televideo is switched on by the main power switch on the front panel and by the button. Simple recording - REC LSTOP 00:12:34 Pr 01 ARTE Clock 12:34 MREC SP 00:12:34 Pr 01 ARTE Clock 12:34 PAUSE 00:12:34 Pr 01 ARTE Clock 12:34 LSTOP 00:12:34 Pr 01 ARTE Clock 12:34 Choose the station whose programme you want to record. Start your recording. If you wish to interrupt recording briefly -then continue. Stop your recording.
◆ For timer recording, clock, date, and stations must be set correctly. ◆ Load a cassette with its safety tab in place and with sufficient free space for the recording. ◆ To enter station numbers using the cursors VW. R e c o r d i n g CASSETTES Timer recording Call the televideo’s “menu”, choose”Timer programme”. Timer programme No. Pr.
RECORDING c a s s e t t e s ◆ For timer recordings, clock, date, and stations must be set correctly (page 5). ◆ Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording. Timer recording using VideoPlus+ (ShowView): (Option) Call the VideoPlus+ (ShowView) menu. Showview --------01/01/2001 0-9 CLEAR SV/V+ 13:57 : Digit entry : Store : Delete : Exit From your TV magazine, type in the number next to the programme you want to record.
◆ Your televideo automatically sets an electronic marker (index) at the beginning of each recording and timer recordings. It is these markers which are detected by the index function. M o r e FUNCTIONS INDEX +/F FF 00:12:34 INDEX 02 Pr 01 ARTE Clock 12:34 G REW 00:12:34 INDEX -02 Pr 01 ARTE Clock 12:34 Press the button depending on the number of recordings (index marks) that you wish to wind forward. e.g. 3x for 3 recordings ahead.
M O R E f u n c t i o n s Cassettes Use only good quality tape cassettes with the VHS logo. ◆ Keep cassettes away from excessive moisture or dust, magnetic and electrical fields eg. (loudspeakers and computers). ◆ Always wind the tape to the beginning when you have finished. Store with the full spool at the botton and with the cassette in its cover. You can protect your precious recordings from being wiped by breaking out the safety tab on the side of the cassette (some cassettes have a slide).
M ◆ You can program your televideo so that it switches on and/or off (with the selected station) at a time you want. o r e FUNCTIONS Wake up Timer Wake up Wake up Time Pr No 06:00 01 VW : Select CB : Access MENU : Previous Press CBVW buttons to adjust to desired wake up time and Pr. No.
M O R E f u n c t i o n s Teletext (Option) SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the TV mode. COLOUR BUTTONS IN TOP/FLOF TELETEXT A red, green,yellow and cyan field is shown at the bottom of the screen. If TOP or FLOF teletext (FASTEXT) is transmitted by the station, by pressing the corresponding colour button on the remote controller, you can easily select the desired page.
Connections ◆ Switch off all components when connecting or disconnecting cables.
Connections and ASSEMBLING Scart socket This is used to connect : a VCR a CAMCODER and a video game console or satellite TV receiver or DVD. In most cases, the set changes automatically to AV mode, when the VCR connected is in playback mode. If not, press the AV button on the remote controller. The AV will be displayed on the screen with the current programme number. In AV mode, you can change the TV programme number with the VW buttons or the Number buttons 0~9.
Before requesting service Mains supply the televideo’s power indicator does not light your televideo doesn’t work Recording doesn’t start, the cassette starts playback or is ejected. Play back no colour in picture reproduction, on tape playback Snowy picture on tape playback – The mains lead is not connected to the wall socket. – Condensation may have formed when moving the televideo from a cold to a warm room. Wait until the video reaches room temperature. – Various safety devices have been triggered.
