User's Manual

ManualsBrandsD-Parts Mobilphon & Zubehoer ManualsElectronicsBluetooth Transmitter

B-Speech® Stereo Transmitter RX2

User guide

Introduction

The B-Speech

RX2 offers the latest in Bluetooth

technology Version 2.1. The B-Speech

RX2 Receives

Music Data from players which are compatible with

Bluetooth

with A2DP Profile.

The B-Speech

RX2 can be used with any audio Player or

Speaker with a 3.5 mm or Cinch audio input.

Technical data:

· Bluetooth

V. 2.1, Class II, 10 meters

· Bluetooth

stereo profile: A2DP

· Frequency: 2.4 GHz

· Certified CE and FCC

· 3,5 mm stereo Inlet socket

· Sleep mode for energy saving

· Power supply: charging via mini USB cable

· Operation time: max. 8 hours

· Dimensions: 49mm x21mm x12mm

- 4 -

Manual_Receiver_RX2.qxp 16.06.2009 14:52

Summary of content (7 pages)

PAGE 1
Manual_Receiver_RX2.qxp 16.06.2009 GB B-Speech® Stereo Transmitter RX2 User guide Introduction The B-Speech® RX2 offers the latest in Bluetooth® technology Version 2.1. The B-Speech® RX2 Receives Music Data from players which are compatible with Bluetooth® with A2DP Profile. The B-Speech® RX2 can be used with any audio Player or Speaker with a 3.5 mm or Cinch audio input. Technical data: · · · · · · · · · Bluetooth® V. 2.1, Class II, 10 meters Bluetooth® stereo profile: A2DP Frequency: 2.
PAGE 2
Manual_Receiver_RX2.qxp 16.06.2009 GB Start The contents of the package consist of: · B-Speech® stereo Receiver RX2 · Cable charger USB (portable charger optional) · 3,5 mm Stereo Connector Male Plug / Plug · 3,5 mm Stereo Connector Male Plug / Cinch · This user guide Please check that all the parts are present and intact. Contact your dealer as soon as possible if anything is missing or damaged.
PAGE 3
Manual_Receiver_RX2.qxp 16.06.2009 GB Charging 1. Connect the cable charger mini USB plug to the mini USB input of the B-Speech® RX2. 2. Connect the USB plug on the other end of the cable charger to the USB input of your PC or laptop. The LED lights up during charging. 3. When charging is done, the LED will go off. 4.
PAGE 4
Manual_Receiver_RX2.qxp 16.06.2009 GB RX2 is in pairing mode. 4. Search for the RX2 on your Bluetooth® Mobile or Bluetooth® Audio transmitter. Pair the RX2 with your device and enter the pairing code „0000". 5. Both devices should now find each other and pair. The LED on the RX2 flashes slowly after successful pairing. 6. The LED of the RX2 will turn blue, when both devices are connected. Note: Some Handsets need to be connected after pairing and require authorisation.
PAGE 5
Manual_Receiver_RX2.qxp 16.06.2009 GB Playing music 1. Connect the RX2 with the delivered audio connection wires with your home or car entertainment equipment or any speaker system. 2. Make sure the transmitter (mobile phone or any A2DP Bluetooth® source) is turned on and paired with RX2 within10 Meters. 3. The blue LED from the B-Speech® RX2 indicates that a Bluetooth® connection exists by flashing slowly. 4.
PAGE 6
Manual_Receiver_RX2.qxp 16.06.2009 GB - The distance between the devices is more than 10 meters or there is an obstacle between the devices. - One or both of the devices have been turned off or must be recharged. Note on environmental protection: After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste.
PAGE 7
Manual_Receiver_RX2.qxp D - 10 - 16.06.