Datasheet

Group Temperature Screening Camera
DCS-9500T
Rapidly deploy the DCS-9500T, the essential temperature screening system, in busy entrances
or thoroughfares to get fast and accurate temperature readings. Advanced hardware features
allow screenings of up to 30 people simultaneously. Timely visual and audible alarms notify
of any temperature discrepancies, while 17 viewing modes and facial recognition allow rapid
Accurate Monitoring of Critical Areas
noise and great results, even when crowds of people are concerned. Paired with the optional
Black Body, its able to measure down to an accuracy of ±0.3 °C, so operators are made aware
immediately of even tiny temperature discrepancies.
Comprehensive and Intelligent Screening, Without the Wait
but also return rapid results in 30 ms or less, queuing is no longer required. And even when
immediately with either visual or audible alarms. Facial recognition allows the operator to
rapidly identify the source to then be submitted for further screening without causing a hold
up.
Features
High-accuracy Thermal Camera
•
• Thermal sensitivity up to 40 mK @F1.0
• Boasting a f8 mm @F1.0 thermal camera
• A thermal camera angle of view of H:46° x V:35°
Temperature Detection
• Detect and measure up to 30 faces at the same
time
• 2 x digital temperature alarms
• Response times less than 30 ms
Exceptional Visible Video Quality
• 1/2.8” 2-megapixel progressive CMOS sensor
• f2.7 mm to f12 mm motorized lens with an
aperture of F1.6 ~F2.9
• H:105° x V:32° visible camera angle of view
• True Wide Dynamic Range (WDR)
• H.265, H.264, MJPEG
Closed Network Temperature Monitoring
• Free CMS software included with temperature
monitoring and high-temperature voice alarms
1
Advanced Thermal Detection
400 x 300 high sensitivity thermal sensor with
sensitivity ≤ 40 mK
Accurate Face Detection and Body Measurement
Simultaneously measure up to 30 people with
response times of ≤ 30 ms and accuracy of ± 0.3°C
Thermal and 2 MP Visable Dual Lens Camera
Product Highlights