Quick Installation Guide Nuclias Connect AC1200 Wave 2 Wall-Plated Access Point DAP-2622 Additional documentation is also available on the D-Link website
Contents English 1
Hardware Overview This installation guide provides instructions for installing the DAP-2622 on your network. Additional documentation is also available on the D-Link support website. LED Indicators • • ENGLISH Before You Begin Nuclias Connect Manual: For additional information and instructions on how to configure the device using Nuclias Connect. DAP-2622 User Manual: For additional information and instructions on how to configure the device using the web user interface.
Interface Connectors Installation Using Power over Ethernet (PoE) ENGLISH 1. 1 2 3 Figure 2: Bottom Connectors # Connector 1 2 3 PoE OUT + DATA Description Gigabit RJ-45 port for data and Power over Ethernet (PoE) power. Supports a maximum of 12 W. DATAGigabit RJ-45 port for data. RESET Press and hold for 20 seconds to factory reset the device.
Connecting Wirelessly Connect the management computer to the default SSID of the DAP-2622, “dlink”. 2. Manage the access point from a computer. Enter dap2622.local in the address field of your browser. 3. Log in to the administration user interface. ENGLISH 1. screws to secure the mounting plate to the surface. The default login information is Username: admin Password: admin PoE Mounting Mounting on a Solid Wall For optimal coverage, mount the DAP2622 on the wall.
Appendix - Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TECHNICAL SUPPORT dlink.
Ver.2.
