User Guide

PAIR

1. Take out the earbuds from the Charging Case to power them on.

2. Wait until the LED Indicator on one earbud ﬂashes red and blue

alternately .

For Android Device

Enable Bluetooth on your device

Search and tap Fusion Glare_L or Fusion Glare_R

Select Pair (Voice prompt: Connected)

Select Pair again to pair another earbud

For iOS Device

Enable Bluetooth on your device

Search and tap Fusion Glare_L or Fusion

Glare_R (Voice prompt: Connected)

Select Pair to pair another earbud

Fusion Glare_L

Fusion Glare_R

QUICK GUIDE

FUSION GLARE

PAGE 1
QUICK GUIDE PAIR FUSION GLARE 1. Take out the earbuds from the Charging Case to power them on. 2. Wait until the LED Indicator on one earbud ﬂashes red and blue alternately .
PAGE 2
Tips: (1) After the successful pairing of earbuds, the LED Indicators will ﬂash blue once for every 5 seconds. (2) For iOS device, please ignore the words of “Not Connected” for another earbud on your device after a successful connection. RESET When the earbuds can't work normally, place two earbuds into the Charging Case, then simultaneously touch and hold the Touchpad of two earbuds for around 5 to 8 seconds, until the LED Indicators on both earbuds ﬂash blue 3 times and then stay solid red.