User Instructions Cyrus dAD1 Downloaded From Disc-Player.
Cyrus dAD1 INTRODUCTION E n glish Downloaded From Disc-Player.
CAUTIONS Congratulations on the purchase of your Cyrus dAD1 CD player. This is a precision manufactured state-of-the-art product, constructed to the highest standards and specifications. This manual contains installation and operating instructions to enable you to connect and operate your CD player correctly, thus ensuring the greatest satisfaction and long term use. This instruction manual contains the following sections: Cautions ............................................................................
Cyrus dAD1 CAUTIONS SUPPLY VOLTAGE RE-LOCATING Your dAD1 is factory set to operate from a fixed mains supply voltage, which is marked on a label at the rear of the unit. Before connecting, check that this voltage is the same as your mains supply, i.e. 230V Products Voltage Range 220V-240V 115V Products Voltage Range 110V-120V The dAD1 is supplied specifically for use in your location.
INSTALLATION & OPERATION Cyrus dAD1 Cyrus dAD1 (rear view) Cyrus dAD1 (front view) English Downloaded From Disc-Player.com Cyrus Manuals 1. 2. 3. MC-BUS connections Audio Outputs Digital Output 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Cyrus dAD1 INSTALLATION & OPERATION CONNECTING POWER TO THE UNIT POWER CONTROL In the UK, the dAD1 comes fitted with a mains plug. The plug fuse should be replaced only with a 3 Amp Fuse. Connect one end of a quality RCA interconnect to the audio output sockets c on the rear panel of the dAD1 and the other end to a line level input of your amplifier. Inputs that are suitable for this purpose are CD or AUX. DO NOT connect the dAD1 to the PHONO input.
OPERATION PAUSING Pressing the PLAY/PAUSE key 1@ will pause the current track being played, and hold the disc at the precise point of interruption. The PAUSE symbol will show on the display. Press the PLAY/PAUSE key 1@ again to resume playing the disc. FAST FORWARD/REVERSE The SEARCH FORWARD i and SEARCH REVERSE j keys can be used to locate a specific point within a track. Fast search will commence at a slow speed increasing after a few seconds if the key is held down.
Cyrus dAD1 OPERATION STOP/OPEN 2. The STOP/OPEN key g has several uses. When a disc is playing, pressing STOP once will stop the disc immediately. Pressing STOP twice will stop the disc and open the tray. A long continued depression of the STOP key will stop the disc and open the CD loading tray. If the disc is already stationary, one touch of the STOP/OPEN key g will open the tray. • • • • PROGRAM MEMORY STORAGE To store a customised program sequence: Load a disc.
REMOTE CONTROL Cyrus dAD1 REMOTE CONTROL HANDSET INSTALLING THE HANDSET BATTERIES The principal functions of the dAD1 are available on the remote control handset supplied with the unit. These features have been fully covered in the operation section. The handset also provides access to additional features which are detailed opposite. Remove the battery compartment cover located underneath the unit. Fit the two AAA batteries, one behind the other, in the location provided.
Cyrus dAD1 THE CYRUS AUDIO COMMANDER OPERATING THE dAD1 WITH THE COMMANDER SWITCHING ON/OFF The Cyrus Audio Commander enables integrated system operation of Cyrus components including the dAD1. The handset also provides operating features not found on the standard remote handset. 1. CD Select From Standby, press the CD SELECT key b to select the dAD1 and bring the system amplifier/s out of Standby. Alternatively: Press the SYSTEM ON key c to bring the Cyrus Pre or Cyrus IIIi/III out of Standby.
ADDITIONAL INFORMATION Cyrus dAD1 dAD1 MAINTENANCE POWER SUPPLIES There are no user serviceable parts in the dAD1, so there is no reason to remove any panels. Clean the cabinet using a slightly moistened chamois leather. DO NOT use cleaning agents containing alcohols, ammonia or abrasives. For peak sonic performance, the dAD1 is equipped with several separately regulated power supplies, ensuring optimum isolation between digital disc reading circuitry and the sensitive analogue D/A conversion stages.
Cyrus dAD1 TROUBLESHOOTING GUIDE TROUBLESHOOTING Indication 'EO' on the display (Error: Operating) • A function has been selected which is not available. If you suspect that your dAD1 is not operating to specification, please read through this section before returning it to your local dealer. Indication 'ED' on the display (Error: Disc) • Check that the disc is loaded label side upward. Disc spinning with no sound • The disc may be dirty or scratched. Try loading another disc.
SPECIFICATIONS & GUARANTEE Cyrus dAD1 ELECTRICAL PERFORMANCE GUARANTEE Output level ......................................................... 2.3V rms Output Impedance ....................................................... 50Ω Frequency Response...................................... 20-20,000Hz Channel Separation....................................>75dB @ 1kHz >75dB @ 20kHz SNR (using silent track) ....................................... >98dBA THD @ -10dB ..............................................
