9439 IRONDALE AVE., CHATSWORTH, CALIFORNIA 91311 USA www.cyron.com Vanishing Lights™ CL1202 / CL2002 Thank you for purchasing CYRON Vanishing Light System. Please follow all the steps to assure proper installation and optimum usage of your lighting system. It is a good idea to read through the instructions once before you start your project. Please locate all system components. If any of the components are missing or damaged contact CYRON before proceeding with installation.
Possibilities CYRON Vanishing Light is an extremely versatile lighting system. Ultra small profile, low voltage wiring, and moisture resistance, amongst other features, makes them usable in areas where traditional lighting cannot be used. Some of the more common locations are under cabinets, inside display cases, shelving units, step lights and office task lighting.
____________________ Shelves/Closets _____________________ There are many ways of illuminating objects using this lighting system. Try various locations to achieve the best results. Mounting Lights can be installed using mounting clips or two sided tape. Each method has its advantages. Things to consider when deciding: a. Brackets are not suitable for locations near moving objects or areas experiencing extreme vibrations. b. Brackets are best secured with ½” screws.
Tape: Test a small area to make sure cleaning wipes do not affect the mounting surface. Wipe the bottom of the lightbars and mounting surfaces with the cleaning wipes. Let the surfaces dry. Remove one side of tape liner and apply to the lights as shown in the figure above. Place the lights in the intended area while paying close attention to wires and proper placement. Apply pressure for 5 seconds. If possible place lightbars far enough from each other so the wires are not very loose or hanging down.
Wiring CYRON Vanishing Light is a low voltage system. With the exception of Power supply input, all other wires are operating at low voltages to minimize the risk of electrical shocks or fire hazards. However, working with electrical devices has risks. Consult with CYRON Technical Support or your qualified electrician for good wiring practices. Here are few to keep in mind: Never cut wires or modify the lighting system without consulting CYRON team.
________________ Utilizing More Lightbars __________________ a DO NOT exceed maximum power supply ratings.
CYRON’s primary goal is 100% customer satisfaction. You may call our technical support line or contact us via email 24/7. techsupport@cyron.com 818-772-1900 x106 In order to continually improve our products we welcome all comments about the product you purchased. Thank You! Cyron warrants this product against any defects in materials or workmanship for a period of ONE (1) year from the date of purchase.