CH-2D3D 2D to 3D Converter Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction ���������������������������������������������� 1 2. Applications ��������������������������������������������� 1 3. Package Contents ���������������������������������� 1 4. System Requirements ������������������������������ 1 5. Features ���������������������������������������������������� 1 6. Operation Controls and Functions ��������� 2 6.1 Front Panel ������������������������������������������2 6.2 Rear Panel �������������������������������������������3 7.
1. INTRODUCTION The 2D to 3D Converter offers real-time conversion of 2D content into 3D. Using this device you can easily create a 3D video using 3D TV/ display. Instead of purchasing expensive 3D DVDs, this device allows you to convert 2D formats into 3D formats, for instance 2D content to SBS (Side-by-side Half). 2. APPLICATIONS • Home entertainment • Showroom environments 3. PACKAGE CONTENTS • 2D to 3D Converter • 5 V/2.6 A DC power adaptor • User Manual 4.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel L M H HDMI OUT 3D (SBSH) Bypass 3D Strength 1 MODE 2 3 1 3D Strength Press to select 3D image strength (Low/Middle/High). 2 HDMI OUT HDMI output to connect to the 3D ready HDMI display. 3 Mode Select • Press the mode button to select SBS 3D (SBSH) or bypass mode. • If no picture is displayed, please check the TV's 3D setting is on SBSH or select bypass mode.
6.2 Rear Panel DC 5V 1 HDMI IN 2 1 DC 5V Plug the 5V DC power supply into the unit and connect the adaptor to an AC wall outlet. 2 HDMI IN Connect the HDMI output of the 2D source the HDMI IN connector.
7.
8. SPECIFICATIONS TMDS Clock Frequency 148.5 MHz Color Depth 8-bit Color Space 4:2:2 YUV, RGB Input Port 1 × HDMI Output Port 1 × HDMI Bypass Resolution 480i, 480p@60, 576i, 576p@50, 720p@60, 720p@50, 1080i@50, 1080i@60, 1080p@24, 1080p@50, 1080p@60 2D to 3D Support Resolution 720p@60, 1080p@24, 1080p@60 Power Supply 5 V/2.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.