PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 More Information Cypress provides a wealth of data at www.cypress.com to help you to select the right module for your design, and to help you to quickly and effectively integrate the module into your design.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 Contents Overview............................................................................ 4 Module Description...................................................... 4 Pad Connection Interface ................................................ 6 Recommended Host PCB Layout ................................... 7 Power Supply Connections and Recommended External Components....................................................................
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Overview Module Description The CYBLE-2X20XX-X1 module is a complete module designed to be soldered to the applications main board. Module Dimensions and Drawing Cypress reserves the right to select components (including the appropriate BLE device) from various vendors to achieve the BLE module functionality. Such selections will still guarantee that all height restrictions of the component area are maintained.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 Figure 1. Module Mechanical Drawing Top View (View from Top) Side View Bottom View (Seen from Bottom) Note 1. No metal should be located beneath or above the antenna area. Only bare PCB material should be located beneath the antenna area. For more information on recommended host PCB layout, see Figure 3, Figure 4, Figure 5, and Figure 6 and Table 3. Document Number: 002-15631 Rev.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Pad Connection Interface As shown in the bottom view of Figure 1 on page 5, the CYBLE-2X20XX-X1 connects to the host board via solder pads on the backside of the module. Table 2 and Figure 2 detail the solder pad length, width, and pitch dimensions of the CYBLE-2X20XX-X1 module. Table 2. Solder Pad Connection Description Name SP Connections Connection Type 30 Pad Length Dimension Pad Width Dimension Pad Pitch 1.02 mm 0.71 mm 1.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 Recommended Host PCB Layout Figure 4, Figure 5, Figure 6, and Table 3 provide details that can be used for the recommended host PCB layout pattern for the CYBLE-212006-01. Dimensions are in millimeters unless otherwise noted. Pad length of 1.27 mm (0.635 mm from center of the pad on either side) shown in Figure 6 is the minimum recommended host pad length. The host PCB layout pattern can be completed using either Figure 4, Figure 5, or Figure 6.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 Table 3 provides the center location for each solder pad on the CYBLE-2X20XX-X1. All dimensions reference the to the center of the solder pad. Refer to Figure 6 for the location of each module solder pad. Table 3. Module Solder Pad Location Figure 6. Solder Pad Reference Location Solder Pad (Center of Pad) Location (X,Y) from Orign (mm) Dimension from Orign (mils) 1 (0.38, 10.54) (14.96, 414.96) 2 (0.38, 11.81) (14.96, 464.96) 3 (0.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 4 details the solder pad connection definitions and available functions for each connection pad. Table 4 lists the solder pads on CYBLE-2X20XX-X1, the BLE device port-pin, and denotes whether the function shown is available for each solder pad. Each connection is configurable for a single option shown with a 3. Table 4.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Power Supply Connections and Recommended External Components Power Connections External Component Recommendation The CYBLE-2X20XX-X1 contains two power supply connections, VDD and VDDR. The VDD connection supplies power for both digital and analog device operation. The VDDR connection supplies power for the device radio.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 Figure 8. Recommended Host Schematic for an Independent Supply Option Document Number: 002-15631 Rev.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 The CYBLE-2X20XX-X1 schematic is shown in Figure 9. Figure 9. CYBLE-2X20XX-X1 Schematic Diagram Document Number: 002-15631 Rev.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Electrical Specification Table 10 details the absolute maximum electrical characteristics for the Cypress BLE module. Table 10. CYBLE-2X20XX-X1 Absolute Maximum Ratings Parameter Description Min Typ Max Units Details/Conditions VDDD_ABS Analog, digital, or radio supply relative to VSS (VSSD = VSSA) –0.5 – 6 V Absolute maximum VCCD_ABS Direct digital core voltage input relative to VSSD –0.5 – 1.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 12. CYBLE-2X20XX-X1 DC Specifications (continued) Parameter Description Min Typ Max Units Details/Conditions T = 25 °C, VDD = 3.3 V IDD9 Execute from flash; CPU at 24 MHz – 7.1 – mA IDD10 Execute from flash; CPU at 24 MHz – – – mA T = –40 °C to 85 °C IDD11 Execute from flash; CPU at 48 MHz – 13.4 – mA T = 25 °C, VDD = 3.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 13. AC Specifications Parameter Description Min Typ Max Units DC – 48 MHz Wakeup from Sleep mode – 0 – μs TDEEPSLEEP Wakeup from Deep-Sleep mode – – 25 μs 24-MHz IMO. Guaranteed by characterization THIBERNATE Wakeup from Hibernate mode – – 2 ms Guaranteed by characterization TSTOP Wakeup from Stop mode – – 2 ms XRES wakeup FCPU CPU frequency TSLEEP Details/Conditions 1.71 V ≤ VDD ≤ 5.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 15. GPIO AC Specifications Parameter Description Min Typ Max Units Details/Conditions TRISEF Rise time in Fast-Strong mode 2 – 12 ns 3.3-V VDDD, CLOAD = 25 pF TFALLF Fall time in Fast-Strong mode 2 – 12 ns 3.3-V VDDD, CLOAD = 25 pF TRISES Rise time in Slow-Strong mode 10 – 60 ns 3.3-V VDDD, CLOAD = 25 pF TFALLS Fall time in Slow-Strong mode 10 – 60 ns 3.3-V VDDD, CLOAD = 25 pF FGPIOUT1 GPIO Fout; 3.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 19. XRES AC Specifications Parameter TRESETWIDTH Description Min Typ Max Units Details/Conditions 1 – – μs – Reset pulse width Temperature Sensor Table 20. Temperature Sensor Specifications Parameter TSENSACC Description Temperature-sensor accuracy Min –5 Typ ±1 Max 5 Units °C Details/Conditions –40 °C to +85 °C Details/Conditions SAR ADC Table 21.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 22. SAR ADC AC Specifications (continued) Parameter Description Min Typ Max Units Details/Conditions A_DNL Differential nonlinearity. VDD = 1.71 V to 3.6 V, 1 Msps –1 – 2 LSB VREF = 1.71 V to VDD A_DNL Differential nonlinearity. VDD = 1.71 V to 5.5 V, 500 Ksps –1 – 2.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Digital Peripherals Timer Table 23. Timer DC Specifications Parameter ITIM1 Description Block current consumption at 3 MHz Min – Typ – Max 42 Units μA ITIM2 Block current consumption at 12 MHz – – 130 ITIM3 Block current consumption at 48 MHz – – 535 μA μA Min FCLK Typ – Max 48 Units MHz Details/Conditions 16-bit timer 16-bit timer 16-bit timer Table 24.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Pulse Width Modulation (PWM) Table 27. PWM DC Specifications Parameter Description Min Typ Max Units μA μA μA Details/Conditions IPWM1 Block current consumption at 3 MHz – – 42 IPWM2 Block current consumption at 12 MHz – – 130 16-bit PWM IPWM3 Block current consumption at 48 MHz – – 535 Min Typ Max Units Details/Conditions 16-bit PWM 16-bit PWM Table 28.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Serial Communication Table 31. Fixed I2C DC Specifications Parameter Description Min Typ Max Units Details/Conditions – – 50 – 1.4 μA μA μA μA Typ Max Units Details/Conditions – 400 kHz II2C1 Block current consumption at 100 kHz II2C2 Block current consumption at 400 kHz – – 155 II2C3 Block current consumption at 1 Mbps – – 390 – – Min – 2 I C enabled in Deep-Sleep mode II2C4 – – – Table 32.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Memory Table 39. Flash DC Specifications Parameter Description Min Typ Max Units Details/Conditions 1.71 – 5.5 V – Number of Wait states at 32–48 MHz 2 – – CPU execution from flash Number of Wait states at 16–32 MHz 1 – – CPU execution from flash Number of Wait states for 0–16 MHz 0 – – CPU execution from flash Min Typ Max VPE Erase and program voltage TWS48 TWS32 TWS16 Table 40.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Voltage Monitors (LVD) Table 45. Voltage Monitor DC Specifications Parameter VLVI1 Description LVI_A/D_SEL[3:0] = 0000b Min 1.71 Typ 1.75 Max 1.79 Units V Details/Conditions – VLVI2 LVI_A/D_SEL[3:0] = 0001b 1.76 1.80 1.85 V – VLVI3 LVI_A/D_SEL[3:0] = 0010b 1.85 1.90 1.95 V – VLVI4 LVI_A/D_SEL[3:0] = 0011b 1.95 2.00 2.05 V – VLVI5 LVI_A/D_SEL[3:0] = 0100b 2.05 2.10 2.15 V – VLVI6 LVI_A/D_SEL[3:0] = 0101b 2.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Internal Main Oscillator Table 48. IMO DC Specifications Parameter Description Min Typ Max Units Details/Conditions – IIMO1 IMO operating current at 48 MHz – – 1000 IIMO2 IMO operating current at 24 MHz – – 325 IIMO3 IMO operating current at 12 MHz – – 225 IIMO4 IMO operating current at 6 MHz – – 180 IIMO5 IMO operating current at 3 MHz – – 150 μA μA μA μA μA – – – – Table 49.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 53.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 53. BLE Subsystem (continued) Parameter Description EO Eye opening = ΔF2AVG/ΔF1AVG FTX, ACC Min Typ Max Units Details/Conditions RF-PHY Specification (TRM-LE/CA/05/C) 0.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Table 53. BLE Subsystem (continued) Parameter Description Min Typ Max Units Details/Conditions – IDLE2TX BLE.IDLE to BLE. TX transition time – 120 140 IDLE2RX BLE.IDLE to BLE. RX transition time – 75 120 μs μs RSSI, ACC RSSI accuracy – ±5 – dB – RSSI, RES RSSI resolution – 1 – dB – RSSI, PER RSSI sample period – 6 – μs – – RSSI Specifications Document Number: 002-15631 Rev.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Environmental Specifications Environmental Compliance This Cypress BLE module is built in compliance with the Restriction of Hazardous Substances (RoHS) and Halogen Free (HF) directives. The Cypress module and components used to produce this module are RoHS and HF compliant. RF Certification The CYBLE-212006-01 and CYBLE-202007-01 modules will be certified under the following RF certification standards at production release.
RF Exposure distance of the device is 15mm.
RF Exposure distance of the device is 15mm. la distance d'exposition RF de l'appareil est de 15mm.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 MIC Japan CYBLE-212006-01 and CYBLE-202007-01 are certified as a module with type certification number TBD. End products that integrate CYBLE-212006-01 and CYBLE-202007-01 do not need additional MIC Japan certification for the end product. End product can display the certification label of the embedded module. KC Korea CYBLE-212006-01 and CYBLE-202007-01 are certified for use in Korea with certificate number TBD. Document Number: 002-15631 Rev.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Packaging Table 55. Solder Reflow Peak Temperature Module Part Number Package Maximum Peak Temperature Maximum Time at Peak Temperature No. of Cycles CYBLE-2X20XX-X1 30-pad SMT 260 °C 30 seconds 2 Table 56. Package Moisture Sensitivity Level (MSL), IPC/JEDEC J-STD-2 Module Part Number Package MSL CYBLE-2X20XX-X1 30-pad SMT MSL 3 The CYBLE-2X20XX-X1 is offered in tape and reel packaging.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 Figure 12 details reel dimensions used for the CYBLE-2X20XX-X1. Figure 12. Reel Dimensions The CYBLE-2X20XX-X1 is designed to be used with pick-and-place equipment in an SMT manufacturing environment. The center-of-mass for the CYBLE-2X20XX-X1 is detailed in Figure 13. Figure 13. CYBLE-2X20XX-X1 Center of Mass (Seen from Top) - TBD Document Number: 002-15631 Rev.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Ordering Information Table 57 lists the CYBLE-2X20XX-X1 part numbers and features. Table 57.
CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 PRELIMINARY Acronyms Document Conventions Table 58.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 Document History Page Document Title: CYBLE-212006-01, CYBLE-202007-01, CYBLE-202013-11 EZ-BLE™ PRoC™ 4.2 XR Module Document Number: 002-09764 Revision ECN Orig. of Change Submission Date ** PRELIMINARY MINS PRELIMINARY Description of Change Preliminary datasheet for CYBLE-212006-01, CYBLE-202007-01 and CYBLE-202013-11module. Document Number: 002-15631 Rev.
PRELIMINARY CYBLE-212006-01 CYBLE-202007-01 CYBLE-202013-11 Sales, Solutions, and Legal Information Worldwide Sales and Design Support Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office closest to you, visit us at Cypress Locations. PSoC® Solutions Products ARM® Cortex® Microcontrollers Automotive Clocks & Buffers Interface Lighting & Power Control Memory PSoC Touch Sensing USB Controllers Wireless/RF cypress.