CYP A5 brochure 2011 AU-EL v4.
AU-11SA v1.3 HDMI Audio De-embedder with built in Repeater ® T he AU-11SA is an advanced solution for HDMI to HDMI repeating with Audio de-embedding. Its compatible with v1.3 HDMI specifications, a cutting edge technology which defines the transfer of deep colour (12 bit) video with a high bandwidth of up to 225Mhz. Connect to source and display (HDMI), select the required audio format & output your chosen audio format to your amplifier. Features • • • • • • • Compliant with v1.3 HDMI, HDCP 1.
AU-D11S SRS TruVolume™ - SCART Volume Control Processor T he AU-D11S SCART Volume Control Processor regulates TV-channel volume to your own comfortable audio level, preventing annoying audio fluctuations, especially during commercials or whilst channel surfing. This product will output the video and processed audio via SCART, whilst simultaneously outputting the same processed audio via analogue audio RCA connections.
AU-D12 Optical Audio Distribution Amplifier T he AU-D12 is a digital audio splitter with one Optical (Toslink) input to two Optical (Toslink) outputs, maintaining a reliable and loss-less audio signal transmission. Features • • • • 1:2 Optical (Toslink) Distribution Amplifier. Supports S/PDIF standard of digital audio transmission. Amplifies Optical (Toslink) output, extending another 5 metres.
AU-D150 USB/Optical Digital Audio Converter (DAC) USB/Optical Digital Audio Converter (DAC) will convert a digital audio signal to analogue, whilst simultaneously outputting a digital optical signal. It is designed for easy installation of USB or optical sources and can be powered by USB or via the included PSU.
AU-D18 Analogue Stereo Lip Sync Corrector T he AU-D18, CYP’s analogue stereo Lip Sync Corrector, is a small device for correcting audio lip sync issues. This solution features a manually adjustable timing selector dial which can be adjusted so that users may fine tune the timing of the audio so that it is in sync with the video signal, overcoming any annoying sound mismatch to the display or amplifier. Features • • • • • Lip Sync corrector with adjustable delay between 0 & 300ms.
AU-D2 Digital Audio Coaxial/Optical Converter T he AU-D2 is a versatile digital audio converter, either coaxial to optical or optical to coaxial. Simply select one of the digital audio inputs for two identical audio signals in both output formats. Features • • • • • Digital Audio Coaxial/Optical by-directional Converter. Two-way conversion; Coaxial to Optical or Optical to Coaxial. Supports amplification of digital audio and extends the transferring distance through coaxial and/or optical cables.
AU-D21 Optical Audio Switcher T he AU-D21 is a Optical (Toslink) switcher, select between two Optical (Toslink) sources to one Optical (Toslink) output whilst maintaining a reliable and loss-less audio signal transmission. Features • • • • 2:1 Optical (Toslink) Switcher. Supports S/PDIF standard of digital audio transmission. Amplifies digital Optical (Toslink) output, extending another 5 metres.
AU-D3 Digital to Analogue Audio Converter (DAC) T he AU-D3 is designed to convert either Coaxial or Optical digital signals to analogue stereo audio. This unit is particularly useful when connecting digital TV’s to analogue amplifiers. Features • • • • • Digital Audio to Stereo Audio Converter (DAC). Integrated digital interpolator filter. Supports digital audio signal (Coaxial/Toslink) input and analogue audio signal (L/R) output. Accepts uncompressed digital stereo audio input. Accepts 32, 44.
AU-D4 Analogue to Digital Audio Converter T he AU-D4 is designed to convert analogue stereo audio to Digital Coaxial and/or Optical (Toslink) outputs simultaneously. Features • • • • • Analogue to Digital Audio Converter (ADC). Uncompressed 2-channel LPCM digital audio signal output. Amplifies digital Optical (Toslink) output, extending another 5 metres. Output sampling rate: 48kHz. Electromagnetic noise-free transmission.
AU-D41 4 to 1 Digital optical audio switcher with IR remote T he AU-D41 Optical Audio Switcher has a four optical inputs and one optical output. This device allows users with up to four optical sources, the ability to switch between sources whilst connected to one output display or amplifier. All signals are bypassed without delay. This device has ‘last memory function’ and an IR remote control for convenient use. Features • • • • • • 4 input digital optical audio switcher.
AU-D4T Analogue to Digital Audio Converter with Audio Delay T he AU-D4T is designed to convert analogue stereo audio to digital Coaxial and/or Optical (Toslink) outputs simultaneously with the addition of integrated Audio delay controls. Features • • • • • • Audio delay technology provides a 150ms delay on audio output for the user to compensate for lip sync (or A/V sync). Uncompressed 2-channel LPCM (Linear Pulse Code Modulation) digital audio signal output.
AU-D6S SRS TruVolume™ - Volume Control Processor T he AU-D6S Volume control, regulates TV-channel volume to your own comfortable audio level, preventing audio fluctuations whilst changing channels and reducing fluctuations during commercials. Features • • • • • SRS TruVolume™ maintains a steady volume, allowing listeners to set their desired volume once to enjoy television, music and all other content without volume fluctuations.
AU-D7 Audio Processor with Virtual 5.1 Encoder T he AU-D7 is a dynamic Audio Processor for converting stereo audio signals to virtual surround sound whilst still outputting on Left & Right RCA plugs. Features • • • • Uses Adaptive Sound Technology (AST) & Virtualiser X (DVX) to convert stereo to virtual 5.1 surround sound. Virtual surround signal (5.1 channels) output through Left & Right RCA’s. Bandwidth Extender (DBEX) for frequency compensation. Smart Compression (DSC) for sound balancing.
AU-D8S SRS TruVolume™ - HDMI Volume Control Processor ® T he AU-D8S HDMI Volume Control Processor regulates TV-channel volume to your own comfortable audio level, preventing annoying audio fluctuations, especially during commercials or whilst channel surfing. Features • • • • • • • • v1.3 HDMI, HDCP 1.1, DVI 1.0 compliant. SRS TruVolume™ maintains a steady volume, allowing listeners to set their desired volume once to enjoy television, music and all other content without annoying volume fluctuations.
AU-D9 Bi-Directional Digital/Analogue Audio Converter T he AU-D9 is a versatile audio converter allowing users to convert analogue audio into digital or digital audio into analogue. It can simultaneously output in all 3 audio formats without any signal loss. Features • • • • • • • Bi-directional Digital/Analogue Audio Converter. Three-way conversion: Coaxial to Optical & Analogue; Optical to Coaxial & Analogue; Analogue to Optical & Coaxial.
EL-21SY v1.3 HDMI 2-Way Switcher ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 2-way Switcher. Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (1920x1200). • HDTV - 480i, 576i, 480p, 576p, 720p, 1080i, 1080p and 1080p24fps.
EL-31SY v1.3 HDMI 3-Way Switcher ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 3-way Switcher. Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (1920x1200). • HDTV - 480i, 576i, 480p, 576p, 720p, 1080i, 1080p and 1080p24fps.
EL-41AT v1.3 HDMI & Digital Audio 4-way Switcher ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. The EL-41AT has additional independent digital audio on all HDMI inputs and outputs. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI & Digital Audio 4-way Switcher. Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (1920x1200).
EL-41SY v1.3 HDMI 4-Way Switcher ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 4-way Switcher. Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (1920x1200). • HDTV - 480i, 576i, 480p, 576p, 720p, 1080i, 1080p and 1080p24fps.
EL-41WAD v1.3 HDMI 4 to1 Mountable Switcher ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. The EL-41WAD has additional features of wall mountings and a system reset function that will reset the display, every 10 minutes, to a designated source. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 4 to 1 Mountable Switcher. Resolutions Supported: • PC - VGA to UXGA.
EL-42S v1.3 HDMI 4 Way Switcher with 2 Identical Outputs ® E ach switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. The EL-42S has an additional output to display HD content on 2 displays. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 4 Way Switcher with 2 Identical Outputs. Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (1920x1200).
EL-42SA v1.3 HDMI 4 by 2 Switcher with Analogue Audio Routing ® T he EL-42SA switcher from the Elector Range, is compatible to v1.3 HDMI specifications, supporting up to 12 bit Deep Colour together with High Definition audio. This switcher features additional analogue audio inputs for each of the four HDMI inputs. It has dual HDMI output which can be separately configured for audio routing, either internal (HDMI audio) or external (analogue stereo audio). Features • • • • • • • • • • v1.3 HDMI, HDCP 1.
EL-5300 Multimedia Converter, De-Interlacer & Switcher ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. The EL-5300 allows the user to convert, de-interlace & Switch all their analogue and digital devices to HDMI. All standard definition inputs can be de-interlaced for compatibility with all HDMI displays. The EL-5300 has the additional benefit of RS-232 control. Features • • • • • • • • • v1.
EL-C41C v1.3 HDMI 4-Way Switcher with CEC Control ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. This CEC command function switcher allows the latest v1.3 HDMI equipment to Auto-Switch on source power up. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 4-Way Switcher with CEC Control. Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA .
EL-C61C v1.3 HDMI 6-Way Switcher with CEC ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. This CEC command function switcher allows the latest v1.3 HDMI equipment to Auto-Switch on source power up. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 6-Way Switcher with Consumer Electronics Control (CEC). Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA .
EL-C81C v1.3 HDMI 8-Way Switcher with CEC ® Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. This CEC command function switcher allows the latest v1.3 HDMI equipment to Auto-Switch on source power up. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 8-Way Switcher with Consumer Electronics Control (CEC). Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA .
OR-HD22S v1.3 HDMI 2 x 2 Matrix Switcher ® Each HDMI matrix in the Orbit range of full matrix switchers is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. The OR-HD22S also has the additional benefit of RS-232 control. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 2 x 2 Matrix Switcher. Resolutions supported: • PC - VGA to UXGA • HDTV - 480i to 1080p plus 1080p24fps.
OR-HD24S v1.3 HDMI 2 x 4 Matrix Switcher ® Each HDMI matrix in the Orbit range of full matrix switchers is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Defination Audio. The OR-HD24S also has the additional benefit of RS-232 control. Features • • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 2 x 4 Matrix Switcher. Resolutions supported: PC - VGA to UXGA HDTV - 480i to 1080p plus 1080p24fps.
OR-HD42S v1.3 HDMI 4 x 2 Matrix Switcher ® Each HDMI matrix in the Orbit range of full matrix switchers is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. The OR-HD42S also has the additional benefit of RS-232 control. Features • • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 4 x 2 Matrix Switcher. Resolutions supported: PC - VGA to UXGA. HDTV - 480i to 1080p plus 1080p24fps.
OR-HD44E v1.3 HDMI 4 x 4 Matrix Switcher ® Each HDMI matrix in the Orbit range of full matrix switchers is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. The OR-HD44E also has the additional benefit of RS-232 control. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1, DVI 1.0 compliant. HDMI 4 x 4 Matrix Switcher. Resolutions supported: • PC - VGA to UXGA; • HDTV - 480i to 1080p plus 1080p24fps.
OR-HD44S v1.3 HDMI 4 x 4 Matrix Switcher ® Each HDMI matrix in the Orbit range of full matrix switchers is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. The OR-HD44S also has the additional benefit of RS-232 control. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 4 x 4 Matrix Switcher. Resolutions supported: • PC - VGA to UXGA. • HDTV - 480i to 1080p plus 1080p24fps.
OR-HD88S v1.3 HDMI 8 x 8 Matrix Switcher ® Each HDMI matrix in the Orbit range of full matrix switchers is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. As multiple HDMI inputs and outputs increase, the need for a HDMI matrix that will inter-connect these HDMI devices is becoming more eminent. The OR-HD88S 8 x 8 HDMI Matrix provides a robust and convenient solution for these installations. Features • • • • • • • • • • v1.3 HDMI, HDCP 1.1, DVI 1.
OR-IR44 Infrared 4 x 4 Matrix The OR-IR44 infrared matrix is designed for controlling up to four sources from four display locations, using the original source remote controls or universal remote controls. A true matrix design allows any of the four inputs to be routed to any (or all) of the IR outputs giving full independent source to screen control. This solution also has an additional master input and output.
OR-YUV44S Component 4 x 4 Matrix Switcher with Digital Audio ® A high performance Component Video with Digital/Analogue Audio Matrix. Each of the four HDTV audio/ video sources can be directed to any one of the four outputs or all four displays can show one identical input source at the same time. The OR-YUV44S also has the additional benefit of RS-232 control. Features • • • • • • Provides 4 x 4 matrix input/output of Component video (YPbPr/YCbCr) and Left/Right stereo & Coaxial digital audio signal.
CYP A5 brochure 2011 OR-PU aw.
PU-103 v1.3 HDMI over CAT5e / CAT6 Extender Set ® All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. For even longer distances, also use the PU-108 repeater, which can be cascaded. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. HDMI over CAT6 Extender Set. Resolutions supported: • PC - VGA to WXGA • HDTV - 480i to 1080p plus 1080p24fps.
PU-106 v1.3 HDMI over CAT5e / CAT6 Extender Set with IR Pass-through ® All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. The PU-106 also allows you to use your existing Remote Control to control your device with the included IR Reciever & Blaster. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. HDMI over CAT6 Extender Set. Resolutions supported: • PC - VGA to WXGA.
PU-1106 v1.3 HDMI over CAT6 Extender Set with IR Pass-through ® All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 45m. For even longer distances, use the PU-108 repeater, these can also be cascaded. The PU-1106 also allows you to use your existing Remote Control to control your device with the included IR Receiver & Blaster. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. HDMI over CAT6 Extender Set.
PU-1106RX CAT6 to HDMI Receiver with IR Pass-through ® T he PU-1106RX Receiver is the perfect partner for all CYP HDMI over Twin CAT5e/6 Switching and Distribution products, allowing you to extend HDMI signals via CAT5e/6 cabling up to 40m. For even longer distances, use the PU-108 repeater, which can also be cascaded. The PU-1106RX also allows you to use your existing Remote Control to control your device with the included IR Receiver. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.
PU-107 Pure Digital v1.3 HDMI over single CAT6 Transmitter & Receiver Set ® All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 40m. The PU-107 can send and receive a pure digital v1.3 HDMI signal over a single CAT6 cable allowing HD Audio & ‘deep colour’ support. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. v1.3 HDMI over single CAT6 transmitter and receiver set.
PU-107RX Pure Digital v1.3 HDMI over single CAT6 Receiver ® T he PU-107RX Receiver is the perfect partner for all CYP HDMI over Single CAT6 switching and distribution products. This advanced device is capable of receiving pure digital HDMI signals, extended via a single CAT6 cable infrastructure, for up to 40m. The PU-107RX supports HD Audio, ‘Deep Colour’, and full 3D compatibility, making this solution a truly superb installer choice for the very highest quality results. Features • • • • • • • • v1.
PU-108 v1.3 HDMI - CAT5e / CAT6 Repeater ® A dedicated extender for extending the CAT6 cables used with the PU-103, PU-1103, and PU-1106 HDMI over CAT6 Extender Sets. This great device will extend your cabling up to 25 metres either side of the repeater, allowing IR pass-through, and can be cascaded. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. HDMI over CAT5e / CAT6 Repeater. Resolutions supported: • PC - VGA to WXGA. • HDTV - 480i to 1080p plus 1080p24fps.
PU-1103 v1.3 HDMI over CAT6 Extender Set ® A ll the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. For even longer distances, use the PU-108 repeater, these can also be cascaded. The PU-1103 receiver unit does not require local power (power is received through the DDC CAT5e/6 cable from the transmitter). Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. HDMI over CAT6 Extender Set.
PU-22HC v1.3 HDMI/CAT6 to HDMI/CAT6 Cascader ® All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. The PU-22HC cascader with its dual input and outputs allows for great flexiblity within any HDMI over CAT6 system. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. HDMI/CAT6 to HDMI/CAT6 Cascader. Resolutions supported: • PC - VGA to WUXGA. • HDTV - 480i to 1080p plus 1080p24fps.
PU-232 RS-232 Control Over CAT5/6 Extender Set T he CAT5/6 RS-232 extender is an affordable, hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 meters. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration. Features • • • • • • Extends any RS-232 compliant device up to 250 metres from the source to display.
PU-IR01 Infrared over CAT5/6 extender set The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three sources can be controlled locally to the extender, which can be located up to 250m away via CAT5/6 cable.
PU-O4H4C v1.3 HDMI 4x4 Matrix with built in HDMI over CAT6 outputs ® All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. The PU-O products within the PUMA range combine HDMI over CAT5e/6 (PUMA) & HDMI Matrix switcher (ORBIT) to provide versitility to HDMI installations. The PU-O4H4C HDMI matrix has 4 HDMI input and 4 CAT transmitter outputs.
PU-Q1C4H 1 to 4 CAT6 to HDMI splitter ® All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. The PU-Q products within the PUMA range combine HDMI over CAT5e/6 (PUMA) & HDMI distribution (QUANTUM) to provide versitility to HDMI installations. The PU-Q1C4H has 1 CAT receiver input and 1 CAT transmitter output with 3 HDMI outputs. Features • • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant.
PU-Q1C8H 1 to 8 CAT6 to HDMI splitter ® All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. The PU-Q products within the PUMA range combine HDMI over CAT5e/6 (PUMA) & HDMI distribution (QUANTUM) to provide versitility to HDMI installations. The PU-Q1C8H has 1 CAT receiver input and 1 CAT transmitter output with 7 HDMI outputs. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant.
PU-Q1H4C 1 to 4 HDMI to CAT6 splitter All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. The PU-Q products within the PUMA range combine HDMI over CAT5e/6 (PUMA) & HDMI distribution (QUANTUM) to provide versitility to HDMI installations. The PU-Q1H4C has 1 HDMI input & 1 HDMI output and 3 CAT transmitter outputs. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. 1 to 4 HDMI to CAT6 splitter.
PU-Q1H8C 1 to 8 HDMI to CAT6 splitter All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect solution to extend HDMI signals via CAT cabling up to 30m. The PU-Q products within the PUMA range combine HDMI over CAT5e/6 (PUMA) & HDMI distribution (QUANTUM) to provide versatility to HDMI installations. The PU-Q1H8C has 1 HDMI input and 1 HDMI output with 7 CAT transmitter outputs. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. 1 to 8 HDMI to CAT6 splitter.
PU-Q1H8CS 1 to 8 HDMI to single CAT6 splitter ® The PU-Q1H8CS has 1 HDMI input and 8 single CAT6 outputs to simultaneously distribute a HDMI source to eight displays. This solution is perfect for distributing the HDMI source content over longer distances than is usually achievable with HDMI cable, using cost effective CAT6 cable infrastructure. Use the PU-107RX Single CAT6 to HDMI Receivers on each of the eight CAT6 outputs to convert back from CAT6 to HDMI for connection to the display/s.
QU-12S v1.3 HDMI 1 to 2 Distribution Amplifier ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 20 metres and can also be cascaded. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 1 to 2 Splitter. Resolutions supported: • PC - VGA to UXGA. • HDTV - 480i to 1080p plus 1080p24fps.
QU-14S v1.3 HDMI 1 to 4 Distribution Amplifier ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 20 metres and can also be cascaded. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 1 to 4 Splitter. Resolutions supported: • PC - VGA to UXGA • HDTV - 480i to 1080p plus 1080p24fps.
QU-14WE v1.3 HDMI 1 to 4 Mountable Distribution Amplifier ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 10 metres and can also be cascaded. The QU-14WE has mounting lugs cleverly integrated into the casing for easy horizontal or vertical mounting. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant.
QU-18S v1.3 HDMI 1 to 8 Rack Mountable Distribution Amplifier ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 20 metres and can also be cascaded. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 1 to 8 Splitter. Resolutions supported: • PC - VGA to UXGA • HDTV - 480i to 1080p plus 1080p24fps.
QU-18WE v1.3 HDMI 1 to 8 Mountable Distribution Amplifier ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 10 metres and can also be cascaded. The QU-18WE has mounting lugs cleverly integrated into the casing for easy horizontal or vertical mounting. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant.
QU-210S v1.3 HDMI 2 to 10 Rack Mountable Distribution Amplifier ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 20 metres and can also be cascaded. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 2 to 10 Splitter. Resolutions supported: • PC - VGA to UXGA • HDTV - 480i to 1080p plus 1080p24fps.
QU-4 v1.3 HDMI 1 to 4 Distribution Amplifier ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 15 metres and can also be cascaded. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI 1 to 4 distribution amplifier. Resolutions supported: • PC - VGA to UXGA • HDTV - 480i to 1080p plus 1080p24fps.
QU-4M v1.3 HDMI 1 to 4 Distribution Amplifier with System Reset ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 15 metres and can also be cascaded. The additional system reset function will generate a command every 10 minutes, which resets the displays to the designated HDMI input. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.
QU-8MS v1.3 HDMI 1 to 8 Distribution Amplifier with System Reset ® Each splitter in the Quantum Distribution Amplifier Series is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p up to 15 metres and can also be cascaded. The additional system reset function will generate a command every 10 minutes, which resets the displays to the designated HDMI input. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.
RE-11HS v1.3 HDMI to HDMI Equaliser ® T he RE-11HS Equaliser uses v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio with a high bandwidth up to 225MHz. The product supports cable lengths up to 40 metres from the source and 10 metres to the display. Features • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI to HDMI Equaliser. Resolutions Support: (Output resolution follows Input). • PC: VGA,SVGA,XGA,SXGA and UXGA (1600 x 1200).
RE-101 v1.3 HDMI to HDMI Repeater ® T he RE-101 repeater uses v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio with a high bandwidth up to 225MHz. This solution allows distribution of HDMI up to a length of 30 metres. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. HDMI to HDMI Repeater. Supports high definition up to 1080p @50/60Hz, output resolution follows input.
RE-CAC v1.3 HDMI Converter to 75Ω Coaxial cable extender set ® T he RE-CAC Active multimedia transmitter and receiver set is used for long distance cable runs to any HDMI display without loss of image quality. For example; this can be used when replacing an old Barco projector with a new HDMI projector, whereby the existing 75Ω coaxial cabling can be reused. Features • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. HDMI to 75Ω Coaxial cable extender set.
SP-SOT2 v1.3 HDMI HQV Scaler ® T he SP-SOT2 HQV Scaler allows the user to maximize the full benefits of today’s High Definition TV by recreating a cinema viewing experience as the original digital content was intended. Using the Industry leading HQV Realta Video Processor to convert any content into a crisp, stunning, detailed picture plus its noise and artefact free. Edge redrawing when de-interlacing for stunning (1080i to 1080p) video quality. Features • • • • • • • • • • v1.3 HDMI, HDCP 1.
SY-1080SC Scart to HDMI Scaler ® T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-1080SC scaler will take any SCART signal input and convert and scale up to 1080p HDMI output. Features • • • • • • • • • v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant. Scart to HDMI Scaler. Automatic resolution selection and individual resolution selection button - from 576p up to 1080p. Input video systems - NTSC3.
SY-720CV CV or SV to HDMI Converter ® T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-720CV converts either a composite or s-video plus analogue stereo audio to HDMI (720p) together with an extra audio output. Features • • • • • • • • NTSC & PAL compliant with automatic input recognition. CV or SV to HDMI Converter. Video Support: Input - 480i & 576i; Output - 720p.
SY-720SC Scart to HDMI Scaler ® T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-720SC converts Scart to HDMI (720p) together with an extra audio output. Features • • • • • • NTSC & PAL compliant with automatic input recognition. SCART (RGB or video) to HDMI Converter. Video Supports: Input - 480i & 576i; Output - 720p. Audio Support: Input - Analogue stereo (Scart); Output - PCM Stereo (HDMI) plus Analogue stereo.
SY-P290 PC/DVI to HDMI Converter ® T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-P290 is designed to convert and scale Digital or Analogue RGBHV or YUV to HDMI for improved viewing. This unit offers a wide selection of output resolutions/formats, colour space and adjustment to obtain the best picture quality. Features • • • • • • v1.2 HDMI, HDCP 1.1 and DVI 1.0 compliant. PC/DVI to HDMI Converter.
SY-P291 PC/HD to PC/HD Scaler Converter with Bypass output T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-P291 is designed to convert and scale analogue PC/HD inputs offering a wide range of PC/HD resolutions and adjustments to obtain the best picture quality. Features • • • • • • RGBHV, YPbPr & YCbCr compatible. PC/HD to PC/HD Scaler Converter with Bypass output.
SY-P293 PC to HDMI Scaler Converter with Audio ® T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-P293 is designed to scale analogue video signal from a PC source to a digital HDMI output boasting a wide-range of HDTV and PC resolutions. Audio is combined with HDMI video output. This unit offers a selection of colour space and adjustment to obtain the best picture quality. Features • • • • • • • v1.2 HDMI, HDCP 1.
SY-P294 Component (YUV) to HDMI Converter Scaler with Audio ® T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-P294 is designed to scale analogue video signal from a YUV source to a digital HDMI output boasting a wide-range of HDTV and PC resolutions. Audio is combined with HDMI video output. This unit offers a selection of colour space and adjustment to obtain the best picture quality. Features • • • • • • • v1.
SY-P295N Analogue to HDMI Converter Scaler with Audio ® T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-P295N is designed to scale analogue video signal from a CV or SV source to a digital HDMI output, boasting a wide-range of HDTV and PC resolutions. Audio is combined with HDMI video output. This unit offers a selection of colour space and adjustment options to obtain the best picture quality.
SY-PT387 Analogue HD Down-Scaler with Bypass Output T he Synergy range of format converters provide solutions across the board in home and professional installation scenarios. The SY-PT387 converts HD Component Video (YPbPr) to Composite or S-video signals for recording & distributing whilst maintaining the analogue HD for the main display. Features • • • • • • PAL & NTSC compatible. Analogue HD Down-Scaler with Bypass Output. Video Support: HD Component input (YPbPr) up to 1080p.
CWHDI-TxRx Wireless HDMI Solution ® I nput and switch any three HDMI devices and send your HD signals wirelessly in “real time” to any HD display within a 30 metre range. With CYP video interfacing technology the HDMI wireless set will send uncompressed HD Audio & Video and deliver superb picture quality at 1080i + 1080p 24fps without any delays.
XA-4 HDMI Pattern Generator ® T he XA-4 HDMI Pattern Generator with HDCP verification and EDID analysis. Offering up to 36 different video patterns via its OSD menu plus remote operation. Sine wave audio output through HDMI or use the separate optical input. Features • • • • • • • • v1.2 HDMI, HDCP 1.1 and DVI 1.0 Compliant. HDMI Pattern Generator. Resolutions Supported: • PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (all at 60hz). • HDTV - 480p, 576p, 720p, 1080i, 1080p.
XA-HDMI Pro HDMI Test Pattern Generator ® T he XA-HDMI Professional Pattern Generator offer a combination of various timings, patterns, and colour spaces. It can provide up to 4095 types of video testing signals. This generator also supports three types of audio testing signal, built-in sine wave, external analogue audio and external digital audio. Its operation is simple yet comprehensive, use the remote or push buttons to select timings. Features • • • • • • • v1.2 HDMI, HDCP 1.1 and DVI 1.
XA-S11 EDID/CEC Selector T his high performance HDMI v1.3 switcher allows the user to set up a firm EDID and CEC connection between the source and the display, eliminating the time spent on signal configuration with synchronization before receiving a display. Features • • • • • • • • Compliant with HDMI 1.3 and DVI 1.0 standards Serial data rate at up to 2.25Gbps, capable of supporting the following digital video formats in Deep Color Mode at up to 36 bits (12 bits/color).
Glossary 24fps (24p) – refers to a video format that operates at 24 frames per second frame rate with progressive scanning. 5 GHz - Wireless technology using the unlicensed 5GHz frequency bands. 50 Hz – Common Frame rate (image change rate) for video within Europe. 60 Hz - Common Frame rate (image change rate) for video within America/Japan. 5.1 – Surround sound that delivers 6 channels of audio, 5 standard speakers and 1 Sub-woofer. 7.
Glossary D DAC (D/A converter) - An IC Chip that converts digital signals into analogue. Deep Colour - is a term used to describe a gamut (colour space) comprising a billion or more colors. The HDMI 1.3 specification supports Deep Colour bit depths. It defines bit depths for Deep Color as 30 (10) bits (1.073 billion colors), 36 (12) bits (68.71 billion colors), and 48 (16) bits (281.5 trillion colors).
Glossary HDMI - stands for High-Definition Multimedia Interface and provides an easy and convenient way of iconnecting digital audio-video components. HDMI v1.x – different HDMI specifications released by HDMI LLC. HDCP - Stands for High-bandwidth Digital Content Protection. It is a copy-protection scheme developed by Intel to be used in conjunction with DVI and HDMI connections.
Glossary O OSD – On Screen Display. Optical Digital Dudio – optical digital cables use the Toslink connector, these use pulses of light to transmit digital audio data. Optical uses light thus it is immune to interference from electromagnetic and radio frequencies. P PAL – Phase Alternation Line, this is the video standard used most commonly in Europe. PAL uses 625 lines to make up a TV picture and scans at 50Hz.
Glossary SCART - An audio/video connector to carry the audio & video signals on one convenient cable. SD – Standard Definition, traditional format used for TV made up of 576 (visible) Horizontal lines (PAL). Stereo Sudio - Stereophonic sound, commonly called stereo, is the reproduction of sound using two or more independent audio channels through a symmetrical configuration of loudspeakers in such a way as to create the impression of sound heard from various directions, as in natural hearing.