CLUX-8MCAT 1 by 8 HDMI to single CAT6 Splitter Operation Manual CLUX-8MCAT
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
Table of Contents 1. Introduction ……………………..……………………...…........….……. 1 2. Applications …………………..………………….……...................….. 1 3. Package Contents ………………………...........……….................… 1 4. System Requirements ……………..……….........………............……. 1 5. Features …………………………………………......……........…...…… 2 6. Specifications ………………………………...……..........………....…. 3 7. Operation Controls and Functions ……………...……..............…… 7.1 Front Panel .............................................
1. Introduction This 1 by 8 HDMI v1.3 to single CAT6 Splitter can simultaneously distribute a single HDMI source to eight displays when connecting with a CAT6 to HDMI receiver. Providing you with an efficient and cost effective way to link your displays, this system uses a direct input of one HDMI source and eight CAT6 outputs that send uncompressed data and allow you to distribute HDMI signals at their full strength and at great distances.
5. Features HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant Deep color video up to 12 bits, 1080p@60Hz One HDMI source to eight CAT6 output-Allows users to simultaneously link eight displays with eight CAT6 to HDMI receivers. Transmit a single HDMI source through eight outputs without any signal loss Supports LPCM 7.
6. Specifications TMDS Clock Frequency 225Mbps Input Port 1 x HDMI Output Port 8 x Single CAT6 EDID STD/TV HDMI Audio Output PCM2, 5.1, 7.1, Dolby 5.1 DTS 5.1, DD+, D-TrueHD, DTS-HD HDMI Cable In 1080p 8-bit (10M), 12-bit (10M) CAT6 Cable Out 1080p 8-bit (45M), 12-bit (15M) HDMI Resolution 480i~1080p 50/60, 1080p 24, VGA~WUXGA ESD Protection Human body model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Power Supply 5V/3.
7. Operation Controls and Functions The following sections describe the hardware components of the unit. 7.1 Front Panel CLUX-8MCAT POWER 1 x 8 HDMI OVER CAT6 SPLITTER CAT6 OUT 7 CAT6 OUT ① 8 SYNC-RED 3D-ORG HDMI IN ② ③ CAT6 OUT 1 DC 5V ① ④ ① CAT6 OUT 7/8/1: These slots are to connect with single CAT6 to HDMI receivers and from the receiver to display with an HDMI cable. ② SYNC-RED / 3D-ORG: This LED indicator will turn red when the device detects both input signal and any output display.
3. The EDID selection will only be activated when the unit is plugged in and powered on. ② CAT6 OUT 2~6: These slots are to connect with the displays through single CAT6 to HDMI receiver with connection cables. Note: A. This system was tested with CAT-6E/23AWG cables, so if using cables of another type, the performance of this system may be different. B. Cable distance tested with a PS3 & 40” Samsung LED 12 bit LCD TV. C.
8.
A Acronyms Acronym Complete Term 3D 3 Dimension CAT6 Cable Category 6 cable DVI Digital Visual Interface EDID Extended Display Identification Data HDCP High-bandwidth Digital Content Protection HDMI High-Definition Multimedia Interface 7
CYPRESS TECHNOLOGY CO., LTD. Home page: http://www.cypress.com.