CDPS-41SQ HDMI 4×1 Seamless Quad Switcher Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 1 5. Features �������������������������������������������������� 2 6. Operation Controls and Functions ������� 3 6.1 Front Panel �����������������������������������������3 6.2 Rear Panel �����������������������������������������4 6.
1. INTRODUCTION This 4×1 HDMI Seamless Quad PIP Scaler is an advanced HDMI switch with integrated Picture-in-Picture (PIP) technology that can be easily configured and controlled. It allows 4 different sources to be selected and arranged on a single display and supports video resolutions up to 1080p and audio up to 8CH/192kHz. Preset hot keys, IR and RS-232/ Telnet support allows instant control and switching. 2.
5.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel WINDOW POWER MENU CHANNEL INPUT 1 2 3 1 A 2 B 3 C 4 D E 1 2 3 4 F G 1 2 3 4 H 1 2 3 4 + - 4 1 2 3 5 4 1234 6 1 IR Window: Accepts the IR signal from the supplied remote control. 2 POWER: Press to turn the unit on or to put it into standby mode. 3 MENU Button: Press this button to bring up the On-screen Display (OSD) menu on screen. 4 MINUS/PLUS (−/+): Press these buttons to navigate down/up the OSD menu.
6.2 Rear Panel HDMI IN 4 3 2 1 HDMI OUT CONTROL USB SERVICE ONLY 1 2 3 4 RS232 DC 12V 5 6 1 HDMI IN 1~4: Connect to up to four source HDMI equipped source devices such as DVD/Blu-ray players and or PC/Laptop devices. 2 HDMI OUT: Connect to a HD TV/monitor or HDMI matrix for display of the image. 3 CONTROL: Connect to an active network for Telnet control (refer to Section 6.5 for details).
6.3 Remote Control 1 Power: Press this button to switch the device on or to set it to standby mode. 2 Info: Press this button to display the device’s 2 4 firmwareersion. 3 Input CH 1/2/3/4: Press these buttons to cycle through the HDMI sources (1 to 4) for each channel to be displayed on screen. 4 WA~WH: Press these hot keys to select the screen setting where WA to WD display the selected channel in full screen and WE to WH display different combinations of all 4 channels on the same screen.
6.
6.
COMMAND CH4001 DESCRIPTION Change CH4 to Source 1 CH4002 Change CH4 to Source 2 CH4003 Change CH4 to Source 3 CH4004 MUT000 Change CH4 to Source 4 Mute Off MUT001 AUD001 Mute On Change Output Audio to Source 1 AUD002 Change Output Audio to Source 2 AUD003 Change Output Audio to Source 3 AUD004 FAD000 Change Output Audio to Source 4 Fade In-Out Off FAD001 CHR000 Fade In-Out On Chromakey Function Off CHR001 MIR000 Chromakey Function On Mirror Function Off MIR001 ROT000 Mirror Function On
COMMAND RFA001 DESCRIPTION Recall Window from FAV 1 RFA002 Recall Window from FAV 2 RFA003 Recall Window from FAV 3 RFA004 IO1000 Recall Window from FAV 4 CH1 Image OFF IO1001 CH1 Image ON IO2000 CH2 Image OFF IO2001 CH2 Image ON IO3000 CH3 Image OFF IO3001 CH3 Image ON IO4000 CH4 Image OFF IO4001 CH4 Image ON Note: 1. Commands with an asterisk (*) will not function under Windows A to D. 2. 9 Commands will be not executed unless followed with by a carriage return.
6.
MAIN MENU 1ST LAYER 2ND LAYER Window Setup Channel 1 Select Size 3RD LAYER CH1 Wxxx Hxxx Width Unit Width Ten Width Hundred Height Unit Height Ten Height Hundred Position CH1 Hxxxxxx Horizontal Unit Horizontal Ten Horizontal Hundred Vertical Unit Vertical Ten Vertical Hundred Image Output On/Off Window Reset Menu Exit Channel 2 Select Size CH2 Hxxxxxx Width Unit Width Ten Width Hundred Height Unit Height Ten Height Hundred Position CH2 Hxxxxxx Horizontal Unit Horizontal Ten Horizontal Hundred Ve
MAIN MENU 1ST LAYER 2ND LAYER Window Setup Channel 3 Select Size 3RD LAYER CH3 Wxxx Hxxx Width Unit Width Ten Width Hundred Height Unit Height Ten Height Hundred Position CH3 Wxxx Hxxx Horizontal Unit Horizontal Ten Horizontal Hundred Vertical Unit Vertical Ten Vertical Hundred Image Output On/Off Window Reset Menu Exit Channel 4 Select Size CH4 Wxxx Hxxx Width Unit Width Ten Width Hundred Height Unit Height Ten Height Hundred Position CH4 Wxxx Hxxx Horizontal Unit Horizontal Ten Horizontal Hund
MAIN MENU 1ST LAYER Window Setup Favorite Store 2ND LAYER 3RD LAYER FAV 1 Store On/Off/OK FAV 2 Store On/Off/OK FAV 3 Store On/Off/OK FAV 4 Store On/Off/OK Menu Exit Favorite Recall FAV 1 Recall On/Off/OK FAV 2 Recall On/Off/OK FAV 3 Recall On/Off/OK FAV 4 Recall On/Off/OK Menu Exit Menu Exit Window Channel 1 Mirror On/Off Convert Convert Fade In-Out On/Off Rotation R90/L90/180/Off Window Reset Menu Exit Channel 2 Mirror On/Off Convert Fade In-Out On/Off Rotation R90/L
MAIN MENU 1ST LAYER 2ND LAYER 3RD LAYER Chromakey Minimum For R 000~255 Setup* Maximum For R 000~255 Minimum For G 000~255 Maximum For G 000~255 Minimum For B 000~255 Maximum For B 000~255 Switch On/Off Menu Exit Ethernet IP Mode Static/DHCP Setup Static Set IP/Mask/Gate Byte1 High XXX 000~255 Byte2 XXX 000~255 Byte3 XXX 000~255 Byte4 Low XXX 000~255 Re-Link No/Yes Exit Static/DHCP IP LINKED/NOT LINKED IP IP/Mask/Gate Mask XXX.XXX.XXX.XXX Gate XXX.XXX.XXX.
7.
8. SPECIFICATIONS 8.1 Technical Specifications Video Bandwidth 225 MHz/6.
8.
9.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.