CYCLIQ.
Join the Cycliq community We love being part of the global cycling community. www.upride.cc Our mission is to improve road safety by creating awareness of www.youtube.com/cycliq dangerous road users, incidents and making Cycliq readily available to as many cyclists as possible. Our vision is to have the most comprehensive road safety network in the world, ultimately making all road users safer, reducing serious incidents and death. www.instagram.com/cycliq www.facebook.com/cycliq www.twitter.
Contents page What’s in the box 4 Read this before using your Fly12 Sport 5 Your Fly12 Sport 6 Register your Fly12 Sport 6 Fly12 Sport layout 7 Before your first ride 8 Turning on your Fly12 Sport 8 Turning off your Fly12 Sport 8 Light modes 8 Display screen 9 Getting to know the display screen 9 Power on/off 9 Home screen 10 Rotation 11 SD card formatting 12 Factory reset 13 Information screen 13 Image capture 14 Other fun
What’s in the box 1 x Fly12 Sport 1 x Cycliq 64GB microSD Card (installed in Fly12 Sport) 1 x Handlebar Mount including bolts 1 x 22.
Read this before using your Fly12 Sport Disclaimer Safety, operating and care information The Fly12 Sport is designed specifically to be used as a ‘head light’ with video and audio recording capabilities for bicycles. The following is important information which relates to the safe operation and care of your Fly12 Sport. For more information, please read your ‘Safety Information & Limited Warranty Guide’ contained in your accessory box and visit cycliq.com/qsg for more information.
Your Fly12 Sport Register your Fly12 Sport We strongly advise you register your Fly12 Sport with Cycliq, to ensure you receive notifications of firmware updates, feature upgrades and user tips. Registration will also allow us to deliver the fastest possible response should you require technical or warranty support. To register your Fly12 Sport, visit cycliq.com/register, or use the CycliqPlus mobile app.
Your Fly12 Sport Fly12 Sport layout Power button Main LED Camera Front Display screen Microphone Status LED Port door Speaker Side (port door closed) Q button Function button Button microSD card slot Charge port Reset button Front Side (port door open) Bottom side Fly12 Sport User Guide | 7 of 35
Your Fly12 Sport Before your first ride Light modes Please follow these steps before your first ride with your Fly12 Sport. You can cycle through the available light modes using the power button. 1. Fully charge your Fly12 Sport - see page 16 • Camera Only (Main LED off) 2. Ensure the Fly12 Sport port door is securely closed • Solid High (Main LED solid with high intensity) 3. Ensure the safety tether is correctly attached - see page 19 • Solid Low (Main LED solid with low intensity) 4.
Display Screen Getting to know the display screen on your Fly12 Sport The display screen on the back of the Fly12 Sport allows you to control many features and functions with ease. The main functions of the display screen can be toggled by pressing the function button. 1. Power on / off 2. Home screen 3. Rotation 4. SD card formatting 5. Factory reset 6. Information 1. Power on/off Powering on your Fly12 Sport Press and hold the power button until the power on chime is heard.
Display Screen 2. Home screen The home screen is the default display on your Fly12 Sport. When turning on the Fly12 Sport the home screen will be displayed. The screen will also default back to the home screen 30 seconds after any activity. Bluetooth status The Bluetooth icon is shown when a Bluetooth conenction is established with the Fly12 Sport. Time The time on the Fly12 Sport can be adjusted via CycliqPlus. See section on changing your time setting on page 28.
Display Screen 3. Rotation The rotation screen shows the orientation your Fly12 Sport is set to record in. If the hold to rotate prompt is displaying upside down, rotate the screen so the text reads correctly. Changing rotation To rotate the orientation of your Fly12 Sport, press and hold the function button (for approximately 3 seconds). Correct rotation To ensure you have the correct rotation set up, use the two options as a guide. 1. Fly12 Sport mounted below your handlebars 2.
Display Screen 4. SD card formatting Note Please note formatting your microSD card will permanently remove all previously recorded incidents - including any previously locked files. Formatting your microSD card To format your microSD card, press and hold the function button until a five second countdown appears. Continue to hold the function button during the countdown until the success message is shown, then release the function button.
Display Screen 5. Factory reset 6. Information screen To reset your Fly12 Sport Allows you to easily view the firmware version installed on your Fly12 Sport and your serial number. To reset your Fly12 Sport back to factory settings press and hold the function button. A five second countdown will appear - continue to hold the function button during the countdown and release the button when the Fly12 Sport turns off. The Fly12 Sport will then turn itself back on and the reset is complete.
Display Screen 7. Image capture Incident protection Incident protection mode has been designed to automatically lock files containing incidents so that they are not recorded over. Incident protection mode is activated when the Fly12 Sport is tilted more than 60° from vertical for more than five seconds. Learn more about incident protection mode on page 24. The incident screen is displayed to show your incident has automatically been saved and files locked.
Display Screen 8. Other functions Charging Displayed when the Fly12 Sport is powered off and connected to a power source. Each bar represents 25% battery life. 4 bars = 75% to 100% charged 3 bars = 50% to <75% charged 2 bars = 25% to <50% charged 1 bar = 1% to <25% charged Mass Storage Shown when your Fly12 Sport has a microSD card installed and is connected to a desktop. If there is no microSD card installed, the display will flash between the mass storage screen and the no sd card screen.
Setting up your Fly12 Sport Charging your Fly12 Sport battery Battery level indicator Your Fly12 Sport comes partially charged. Before using it for the first time, please charge fully. When turning on your Fly12 Sport, an audible battery status will sound alerting you to the current battery level. This allows you to determine if you have enough power to record your planned ride. To charge: • Connect your Fly12 Sport to a USB power adapter (not supplied) using the supplied USB cable.
Setting up your Fly12 Sport Inserting and removing the microSD card • Your Fly12 Sport comes with a 64GB microSD card pre-installed. • Your Fly12 Sport MUST have a microSD card installed to operate correctly. To install a microSD card into your Fly12 Sport, press the card gently into the card slot of your Fly12 Sport until locked in place. microSD card slot Please ensure the contact points on the microSD card are pointing upwards towards the top of the Fly12 Sport, as illustrated.
Setting up your Fly12 Sport Mounting your Fly12 Sport Your Fly12 Sport comes with a handlebar mount and a universal adapter that features the Cycliq 1/8th turn quick release system. To mount: 1. Place the handlebar mount above or below the handlebar, ensuring that nothing will obstruct the field of camera view. If mounting to a 22.2mm bar install the appropriate rubber adapter then carefully torque the hex bolts to a max of 2Nm. 2.
Setting up your Fly12 Sport Attaching the safety tether to your Fly12 Sport 1. On the back and side of the Fly12 Sport there are two slots for the safety tether to be attached. 2. Thread the thinner part of the tether through the slots, then thread the other end through the loop to secure the tether. 3. We advise ALWAYS using your Fly12 Sport with the safety tether attached and secured around the handlebar or stem.
Setting up your Fly12 Sport Changing your Fly12 Sport settings Most primary functions of your Fly12 Sport can be controlled using the power, Q and function button on the side of the Fly12 Sport. On the Fly12 Sport • Most primary functions can be accessed using the power, Q and function button. • The display screen on the rear of the Fly12 Sport is controlled by the function button.
Visual and audio alerts Mode Visual Alert Audible Alert Recording (Full charge) Display: battery level shown on display screen LED: Flashing red Power On/Off 4 beeps Recording (3/4 charge) Display: battery level shown on display screen LED: Flashing red Power On/Off 3 beeps Recording (1/2 charge) Display: battery level shown on display screen LED: Flashing red Power On/Off 2 beeps Recording (1/4 charge) Display: battery level shown on display screen LED: Flashing red Power On/Off 1 beep Power
Features Video resolution The Fly12 Sport is equipped with a Ultra HD camera. The lens has a 135° viewing angle providing an ultra-wide view. There are multiple video resolutions to choose from. More storage space and power will be used, the higher the resolution settings.
Features Looping function The Fly12 Sport is designed as a ‘set and forget’ cycling accessory. The footage is set to record on a ‘continuous loop’, so you don’t have to worry about running out of storage space on the microSD card. Video files recorded in set segment length When there is no free space left to record on your microSD card, the Fly12 Sport will start recording over the oldest available file first.
Features Incident protection mode Manual footage capture The Fly12 Sport has been designed to automatically save footage from major incidents. If you witness an event that you want to capture and retain when riding, simply press the Q button. This will lock the current and immediately preceding video files. Incident protection mode is activated when the Fly12 Sport is tilted more than 60° from vertical (or 30° from the ground) for more than five seconds.
Features Audio Cycliq Quick Release System The Fly12 Sport records high quality sound using an inbuilt microphone. It also has a speaker which is used for audible alarms and alerts. The Fly12 Sport is mounted and removed from the handlebar mount using a 1/8th turn. Volume levels The volume of the speaker can be set to low, medium or high.
Features Video segment length Footage is saved in chronological order in 3, 5 or 10-minute segments, with each segment creating a separate video file. Smaller segments create video files that are more convenient to move and edit, and use less memory. Larger segments will capture more time either side of an incident, and use more memory. Note Longer video segments length allows the user longer to find a safe place to pull over and manually capture footage.
Using your footage Accessing your footage You can view and edit your footage using the CycliqPlus desktop app. Go to cycliq.com/software to download CycliqPlus for macOS or Windows. After your ride, you can access your footage in a number of ways: 1. Connect the Fly12 Sport to any PC or Mac using the supplied USB cable. 2. Remove the microSD card and read data using your PC or Mac. 3. Using a Cycliq microSD OTG Card Reader. Editing footage You can edit your footage using CycliqPlus on desktop and mobile.
CycliqPlus mobile app All Fly12 Sport settings can be managed using CycliqPlus mobile app available for iOS and Android. Connecting to your mobile device Your Fly12 Sport uses Bluetooth® for connection to your iOS or Android device. Light mode settings This function allows you to select which light options will be available on your Fly12 Sport - see page 8. Audio settings Set the volume of the audible alerts on your Fly12 Sport.
Updating firmware Making sure you have the most up to date firmware will give you the best Cycliq experience possible. Cycliq Plus firmware auto updater Download the macOS or Windows version of the firmware auto updater app from the links below, open on your desktop and follow the on screen instructions. Firmware will be updated automatically to the latest version Visit our CycliqPlus Firmware Updater download page on cycliq.com.
Troubleshooting Reset If a reset is required, the reset button is located within the small cut out as illustrated. Carefully use a fine object to press the reset button to perform the reset. WARNING DO NOT complete a master rest when the Fly12 Sport is in the process of completing a firmware update, as this may damage your Fly12 Sport. Still need help? Go to Fly12 Sport help page where you can view help topics and contact our friendly support team for help on troubleshooting any issues you may be having.
Technical data Name Fly12 Sport Model CE123 Product description 4K bike camera + front light Height 33mm Width 55mm Depth 81.2mm Weight 148g (5.22oz) Battery Rechargeable lithium ion battery Battery size 3000mAh (up to 7 hours in camera only mode) Watt hours 11.10Wh Voltage 3.
Compliance statements Federal Communications Commission (FCC) compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Industry Canada (IC) compliance statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Regulatory information Caution To maintain compliance with the RF exposure guidelines, place the unit at least 0cm from nearby persons. Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries according to the instructions. Limited warranty For comprehensive warranty information refer to http://www.cycliq.
CYCLIQ.COM PO Box 404 Subiaco WA 6904 Australia info@cycliq.com User Guide - Version 1.0.0 MODEL: FLY12 SPORT CE123 Cycliq reserves the right, at its discretion, to change and modify portions of this User Guide.
