User's Manual

Broadband Security Router User Guide
- 44 -
disconnection by clicking the appropriate buttons. Be aware
that, if you make a disconnection here, “Connect-on-
demand” will not function until the connection button is
clicked. Note that “Login” won’t show any information if
you selected “Obtain IP automatically” or “Static IP” on
the OnePage Setup page.
Internet:
This section shows the IP settings status of the router as seen
by external users of the Internet. If you selected “Get IP
Address Automatically”, “PPPoE”, or “PPTP” in the
OnePage Setup, the “ IP Address”, “Subnet Mask”,
“Default Gateway”, and “Domain Name Server” (DNS)
will show the information retrieved from the DHCP server or
ISP which is currently being used. If you selected “ Static
IP” in “One Page Setup: Public IP Address”, the information
will be the same as your input.
DHCP Release:
Click this button to eliminate the IP address obtained from
DHCP server.
DHCP Renew:
Click this button to refresh the IP address from DHCP server.
Note that the “DHCP Release” and “DHCP Renew” button
only show up when you select “Get IP Address
Automatically” in the OnePage Setup.
Intranet:
This section displays the current “Private IP Address” and
“Subnet Mask” of the router, as seen by users of your
internal network.
DHCP Clients Table:
If the router is setup to act as a DHCP server, the LAN side
IP Address distribution table will appear by clicking this
button.
Log
The Log application provides the administrator with the ability to trace Internet
connection. With viewing the Log information, an administrator can send the record to
a specific LAN PCs to have the real time monitor.