User's Manual

Broadband Security Router User Guide
- 37 -
Basic Rates:
Select either 1~2 Mbps or 1~2~5.5~11Mbps auto fallback.
TX Rates:
Select either 1~2 Mbps or 1~2~5.5~11Mbps auto fallback.
Preamble Type:
Preamble is used in the frames to provide time for the
receiving station to synchronize to the incoming data stream.
Authentication Type:
Select either Open System or Share Key as authentication
type. If you are not sure, select both.
MAC Filter:
This function allows you to restrict wireless users to access
Internet.
Click the “Active MAC Table” button will display all MAC
addresses of wireless nodes on your WLAN.
The Wireless Active MAC Table shows the MAC addresses
of wireless clients, which have the same SSID and WEP key
with Wireless Router. When the MAC Filter function is
disabled, the background color is gray. You can add the MAC
addresses showing in this table to the Wireless MAC Filter
List table by checking the box beside these MAC addresses.
If the MAC Filter function is enabled:
Green Background When the wireless client MAC
addresses showing in this table have been entered into the
“Wireless MAC Filter List” table, the background color of
these MAC addresses will be green.
Red Background When the wireless client MAC addresses
showing in this table have not been entered into the
“Wireless MAC Filter List” table, the background color of
these MAC addresses should be red.
Yellow Background If the MAC addresses showing in this
table have been blocked (check the Filter field beside the
MAC address in Edit MAC Filter table), the background
color will be yellow.
Click “Update Filter List” button to open the edit table.