User's Manual

Broadband Security Router User Guide
- 27 -
Virtual Server Settings
The Virtual Server Settings application allows you to set up a maximum of ten public
services that can be accessed by external users of the Internet, such as a Web Address,
Email, FTP etc.. Each service is provided by a dedicated network computer (server)
configured with a fixed IP Address. Although the internal service addresses are not
directly accessible to the external user, the High-Performance Wireless Router is able to
identify the service requested by the service port number and redirects the request to the
appropriate internal IP Address/server. To use this application, it is recommended you
use a fixed Public IP Address from your ISP. Note that your High-Performance Wireless
Router supports only one server of any particular type.
This router also supports UPnP Forwarding. You can use either Virtual Server Settings
or UPnP Forwarding by clicking the button to change setting page. Please note that do
not set the same function server to different IP Address in different setting pages.
Set up individual network computers to act as servers and configure each with a fixed
IP Address.
Note: In the “One Page Setup” screen, ensure the “Private IP Address” is set to the
High-Performance Wireless Router’s default setting of 192.168.1.1. If a fixed Public IP
Address is to be used, select “Specify an IP address” and enter the IP Address and
other necessary information provided by your ISP.