User's Manual

Broadband Security Router User Guide
- 20 -
RAS(for SingTel)
If your ISP uses RAS to establish the connection, you should select this item and follow
the steps below.
User Name:
Enter the user name your ISP provides you.
Password:
Enter the password your ISP provides you.
RAS Plan:
Choose the connection method that you want to use.
Connect-on-demand:
It is a utility used to trigger the RAS session when there
is a packet being sent through the WAN port while it is
on disconnected situation. Check the radio button to
make this function active, and then you must enter the
number of minutes you wish the network to remain idle
before disconnection occurs in the “Max Idle Time”
location.
Keep Alive:
This function keeps your RAS connection enable even if
it remains idle. However, in some situation, RAS session
cannot be established immediately after disconnection.
This is because the system on the ISP’s site may need a
little time to restore itself. You may need to check with
your ISP to obtain detail of how long you need to wait
before re-establish the RAS session. Enter this
information in the “Redial Period” field.